Input Sensitivity (8ohm, 1kHz) 0.775Vrms
Input Impedance 20kohm Balanced
Slew Rate (8ohm, Full Swing) ±30V/?sec
Frequency Response (±0.5dB) 20kHz ~ 50kHz
T.H.D. (f=20Hz~20kHz, Half Power) 0.03%
Signal to Noise Ratio 105dB
Damping Factor (8ohm, 1kHz) 100
Rasidual Noise -85dB
Channel Separation (8ohm, 1kHz) 80dB
Voltage Gain (4ohm) 26dB 29dB 32dB
Power Source 100-120VAC or 220-240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
Power Consumption 300W 420W 770W
Weight 11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb
Dimensions 482(W) x 88(H) x 369(D) mm
/19(W) x 3.5(H) x 14.5(D) in
Weight
11.50 kg
Reviews
There are no reviews yet.
Be the first to review “INTERM QD-4240 AMPLIFIER 4X60W” Cancel reply
Input Sensitivity (8ohm, 1kHz) 0.775Vrms
Input Impedance 20kohm Balanced
Slew Rate (8ohm, Full Swing) ±30V/?sec
Frequency Response (±0.5dB) 20kHz ~ 50kHz
T.H.D. (f=20Hz~20kHz, Half Power) 0.03%
Signal to Noise Ratio 105dB
Damping Factor (8ohm, 1kHz) 100
Rasidual Noise -85dB
Channel Separation (8ohm, 1kHz) 80dB
Voltage Gain (4ohm) 26dB 29dB 32dB
Power Source 100-120VAC or 220-240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
Power Consumption 300W 420W 770W
Weight 11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb
Dimensions 482(W) x 88(H) x 369(D) mm
/19(W) x 3.5(H) x 14.5(D) in
- 6CH 60W DIGITAL AMPLIFIER
- LIGHT WEIGHT
- 6 BUS BROADCASTING FUNCTION WITH A UTP (CATEGORY 5) CABLE.
- VOLUME AND 5 BAND EQ TUNING FUNCTION BY CHANNEL
- AMP ID AUTO/MANUAL ALLOCATION FUNCTION
- SELF-BROADCASTING FUNCTION USING A LOCAL INPUT
- INTERFACE FUNCTION WITH OTHER EQUIPMENT USING A CONTROL INPUT/OUTPUT CONTACT
Manufacturer: INTER-M
Category: AMPLIFIERS
Use: POWER AMPLIFIERS 100V
Measurement Unit: Attribute34381
Warranty Months: 12
Depth (cm): 38.0
AC Line Voltage and Frequency Configurations Available: 220-240VAC DC24V
Height (cm): 8.8
Weight (Kg): 13.0
Order Quantity: 1
Power Output: 60
Rack Installation Possible: Yes
Channels: 6
Power Output W/4Ω: 60
Frequency Response (at 1W, 4/8Ω) (dB) ±: 80Hz-20KHz
Catalog: Professional
Amplifier Type: Power Amplifier
Load Impedance: Ohm
Group: Attribute49042, Attribute50583
Width (cm): 48.2
Product Features:
4 x 75 Watts into 4 Ohms; 4 x 50 Watts into 8 Ohms
ATR (Accelerated Transient Response) technology for ultimate punch and clarity
Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
Independent limiters for each channel offer maximum output level with reliable overload protection
Detented gain controls for precise setting and matching of sensitivity
Precise Power, Signal and Clip LEDs to monitor performance
Servo-balanced XLR and 1/4" TRS inputs plus professional speaker connectors
Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
“Back-to-front" ventilation system including air filter for reliable operation
“Built-like-a-tank“, impact-resistant and all-steel 1U rackmount chassis
Minimum depth chassis (10.1" / 257 mm) and ultra-light weight design (8.8 lbs / 4.0 kg) fits into compact, inexpensive effects racks
High-quality components and exceptionally rugged construction ensure long life
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
. It also features Lab.gruppen?s unique <br>power matching solution, the MLS switch, which offers endless combinations for solving <br>most of the problems related to varying impedances and maximum power capacities of <br>loudspeakers. The latest semiconductor technology is utilized in the new ferrite Power (fP) <br>amplifiers. <br>This, together with Lab.gruppen?s proprietary copper cooling system, Intercooler?, enhances <br>the 2 ohms capacity. Two easily accessible dust filters on the front ensure a clean front-to-rear <br>airflow. Additionally, a new Bi-phase wiring scheme also increases the capacity of the switch <br>mode power supply. This extends the power bandwidth in the low end.</p>
<p>Key Features:<br>4 x 370 watts @ 8 ?<br>4 x 380 watts @ 4 ?<br>4 x 500 watts @ 2 ?<br>(Measured just below clip level, with all 4 channels driven)<br>Light weight and compact: only 8.6 kg (19lbs), 2U high<br>MLS? Switch: Lab.gruppen?s unique power matching for different loads</p>
<p>New Features:<br>Replaces the LAB 1200C<br>Easily accessible dust filters<br>Improved low-end power bandwidth<br>Extruded front panel for increased stability</p>
<p>Besides the traditionally superb Lab.gruppen sonic performance, there is a full line of features <br>to make the fP family functional in all situations from installation to high performance live <br>sound systems:</p>
<p>Regulated switch mode power supply<br>Today there are many lightweight, switch-mode amplifiers in the market. However, the unique <br>Lab.gruppen switch-mode power supply technology offers a number of essential advantages <br>that make it superior to other and seemingly similar power supply designs. The most important <br>features are the regulated power supply and the extreme power efficiency. The regulated power <br>supply easily deals with a very high variation in the AC mains voltage: it can drop by up to 20% <br>below its nominal level - e.g. to 180 V instead of 230 V ? without any problem. Perhaps even <br>greater benefits result from the extreme efficiency of Lab.gruppen amplifiers: only a fraction of the <br>energy from the AC mains is turned into heat.<br>A regulated power supply also presents some other sonic advantages, such as better cone control <br>and the same fast response as a conventional power supply.</p>
<p>Sophisticated protection circuitry, combining:<br>ALS? short circuit protection; the Adaptive Limiting System permits very high peak currents, but <br>keeps the amplifier within the Safe Operation Area<br>DC protection; protects against infrasonic signals<br>VHF protection; protects the loudspeakers against strong very high frequency non-musical signals <br>above the audible range<br>Thermal protection; prevents the amplifier from being overheated. The protection indicators on the front <br>panel are switched on, as a warning, before the protection process is initiated<br>AC protection; shuts down the power supply if the line voltage is outside the operating voltage<br>Clip limiter; prevents severely clipped waveforms from reaching the loudspeakers, whilst maintaining <br>full peak power.</p></td><td>
<p>Model CT475<br>
Product Type Amplifier<br>
Channels 4<br>
Sensitivity 1.4V<br>
Rated Power Output 75W per Channel into 8 ohms<br>
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted 110dB<br>
Total Harmonic Distortion (THD) (full rated power, 20Hz - 20kHz)
Intermodular Distortion (from 0dB down to -40dB)
Frequency Response (at 1W into 4/8 ohms) ± 0.5dB<br>
Crosstalk (below rated power 20Hz to 1kHz) > 70dB<br>
Common Mode Rejection (20Hz to 1kHz) > 55dB, typically > 70dB<br>
Dimension (H x W x D) 1.75 "aposirsi_electrovoice")
Weight 10 lbs (4.5 kg)
Reviews
There are no reviews yet.