INTERM QD-4480 AMPLIFIER 4X120W

807.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Power Output Level:  QD4480                        8ohm (Quad Ch)       80W     4ohm (Quad Ch)       120W     8ohm bridged mono   240W  Input Sensitivity (8ohm, 1kHz)  0.775Vrms Input Impedance 20kohm Balanced  Slew Rate (8ohm, Full Swing) ±30V/?sec Frequency Response (±0.5dB) 20kHz ~ 50kHz  T.H.D. (f=20Hz~20kHz, Half Power) 0.03%  Signal to Noise Ratio 105dB Damping Factor (8ohm, 1kHz)  100 Rasidual Noise  -85dB Channel […]

 

Read more

Power Output Level:  QD4480                       

8ohm (Quad Ch)       80W    
4ohm (Quad Ch)       120W    
8ohm bridged mono   240W 

Input Sensitivity (8ohm, 1kHz)  0.775Vrms
Input Impedance 20kohm Balanced 
Slew Rate (8ohm, Full Swing) ±30V/?sec
Frequency Response (±0.5dB) 20kHz ~ 50kHz 
T.H.D. (f=20Hz~20kHz, Half Power) 0.03% 
Signal to Noise Ratio 105dB
Damping Factor (8ohm, 1kHz)  100
Rasidual Noise  -85dB
Channel Separation (8ohm, 1kHz)  80dB
Voltage Gain (4ohm)  26dB 29dB 32dB
Power Source  100-120VAC or 220-240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
Power Consumption  300W 420W 770W
Weight  11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb
Dimensions  482(W) x 88(H) x 369(D) mm
/19(W) x 3.5(H) x 14.5(D) in
 

Weight 15.50 kg

Reviews

There are no reviews yet.

Be the first to review “INTERM QD-4480 AMPLIFIER 4X120W”

Your email address will not be published. Required fields are marked *

Quick Comparison

INTERM QD-4480 AMPLIFIER 4X120W removeELECTRO VOICE CPS4.10 4-channel Class-D amplifier slot f. optional RCM810 remote module 4 x 1000 W removeCROWN CT-475 POWER POWER AMPLIFIER 4X75W removeINTER-M A-500 30W MODULAR DIGITAL AMPLIFIER removeRAM AUDIO T-1204 Power Amplifier 4x320 Watts removeAUDAC AUDPA73 3-channel Digital Power Amplifier remove
Imageinter-m a-500 modular power amplifier 30w
SKUQD-4480CPS 4.10CT-475A-500T-1204AUDPA73
Rating
Price 807.00 incl. GR VAT2,740.09 incl. GR VAT 1,160.42 incl. GR VAT 786.99 incl. GR VAT 1,071.35 incl. GR VAT 441.43 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

In stock

In stock

AvailabilityIn stockIn stockIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Power Output Level:  QD4480                       

8ohm (Quad Ch)       80W    
4ohm (Quad Ch)       120W    
8ohm bridged mono   240W 

Input Sensitivity (8ohm, 1kHz)  0.775Vrms
Input Impedance 20kohm Balanced 
Slew Rate (8ohm, Full Swing) ±30V/?sec
Frequency Response (±0.5dB) 20kHz ~ 50kHz 
T.H.D. (f=20Hz~20kHz, Half Power) 0.03% 
Signal to Noise Ratio 105dB
Damping Factor (8ohm, 1kHz)  100
Rasidual Noise  -85dB
Channel Separation (8ohm, 1kHz)  80dB
Voltage Gain (4ohm)  26dB 29dB 32dB
Power Source  100-120VAC or 220-240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
Power Consumption  300W 420W 770W
Weight  11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb
Dimensions  482(W) x 88(H) x 369(D) mm
/19(W) x 3.5(H) x 14.5(D) in
 

Amplifier Gain 32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs 4, electronically balanced, Phoenix-type
Audio Network No
CAN Bus Interface Yes (With Optional RCM-810 Card)
Continuous Rated Power
(1 kHz, THD 1%) 100v 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 2Ω 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 4Ω 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 70v 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 8Ω 500 Watts
Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Cooling Front-to-Rear, continuously variable fans
DIM 30 0.02 %
Electronics Type Amplifier
Frequency Response 15 Hz-30 kHz
Input Impedance (Balanced) 20 kΩ
Input Sensitivity 0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100V
Intermodulation Distortion (SMPTE) 0.05 %
Mains Voltage 220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz
Network Control (IRIS-Net) Optional
Total Harmonic Distortion 0.05 %
Variable Load Drive (VLD) Yes
Height 2RU 88.1 mm (3.47“)
Width 483 mm (19.02“)
Depth 421.5 mm (16.59“)
Weight Net 11.1 kg (24.47 lbs)

aposirsi_electrovoice Weight    10 lbs (4.5 kg)


Ψηφιακό modular ενισχυτή 8 καναλιών (7+1), ισχύ σε κάθε κανάλι 30W (333 ohm). Αυτόματος έλεγχος τις κατάστασης των ενισχυτών, και αυτόματη ενεργοποιήσει του spare ενισχυτή σε περίπτωση δυσλειτουργίας. Δυνατότητα monitoring κάθε καναλιού μέσο ακουστικών. Τροφοδοσία 220-240 AC, και σε περίπτωση διακοπής του δικτύου τροφοδοτείται με 24V DC μέσο μπαταρίας.

• Eight and four channel models with 300W and 150W per channel
• Minimal footprint and mass arround 200mm depth and 6 Kg
• Optional Add-on card to interface with third party alarm systems with GPIO connections
• FCM™ Faulty Channel Management system to avoid entire device shutdown
• State-of-the-art layout for maximum performance and reliability
• Highly oversized thermal dissipation design for maximum reliability
• Superb distortion and noise figures
• All channels bridgeable by pairs
• Selectable gain in four channel groups (26, 32 and 38dB)
• Subsonic filter per channel (35Hz user selectable)
• Temperature and signal dependant, intelligent cooling system for minimal
noise
• Optimal heat extraction due to the air tunneled enclosure and insulator-less
power device attachment to the heatsink
• Direct connector-less output for maximum quality loudspeaker control
• High grade engineering inside with the latest SMD technology
• Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection
• Critical electronic and mechanical parts selection
• Innovative protection systems, FCM™ Faulty Channel Management and SSP™
SOA Sentry Protection
• Detented and optionally tamper-proof volume potentiometers
• Hi efficiency, two steps Class H Audio topology
• Protection, Signal and Clip indicators per channel
• Power On and Standby general indicators
• Extremely compact, fully featured QuantaPulse Power supply
• Low current consumption and heat generation allowing less demanding
conditions for multiple amplifier installations
• Factory preset worldwide mains voltage power supply
• Laser cut four milimeters aluminium front panel
• Rugged 2U steel chasis


t_back_s

OUTPUT POWER T-604 T-1204 T-1208 T-2408
RMS, 1kHz, 1.0% THD+N
4 ohms 4x 160 W 4x 320 W 8x 150 W 8x 300 W
8 ohms 4x 115 W 4x 220 W 8x 100 W 8x 195 W
Bridge @ 8ohms 2x 320 W 2x 640 W 4x 300 W 4x 600 W
Pink Noise 12dB CF
4 ohms 4x 210 W 4x 415 W 8x 180 W 8x 370 W
Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz

Phase Response (@1W 20Hz-20kHz): ±15deg

Total Harmonic Distortion (20Hz-20kHz):
Intermodulation Distortion (SMPTE):
Crosstalk (20Hz-20kHz): >70dB

Voltage Gain (selectable): 26/32/38 dB

Sensitivity: T604:1.5/0.8/0.4V - T1204:2.1/1.0/0.5V - T1208:1.4/0.7/0.4V - T2408:2.0/1.0/0.5V

Signal to noise ratio: T604:107dB - T1204:110dB - T1208:107dB - T2408:110dB

Required AC Mains (@8ohms 1/8 rated power): T604:1A - T1204:1.5A - T1208:1.4A - T2408:2.6A

Dimensions (WxHxD): 483x88.9x210 mm - 19x3.5x8.27 inches

Weight (Net): T604/T1204: 5.4Kg - 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs

Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™


The DPA series amplifi ers are digital power amplifi ers designed to meet the specializedneeds of sound contractors for Multi-Zone distributed speaker systems. They are designedin six different models of Class D power amplifi ers, divided in three different architecturesto meet the requirements for all kinds of applications. They combine the best of all features in one single series of amplifi ers, providing anoutstanding sound quality with all the known advantages of Class D Amplifi ers. Such asthe excellent effi ciency and very low heat dissipation. And due to the complete passivelycooled entity only a minimal of maintenance is needed, while ensuring maximumreliability. The small size of a single rack space make them very interesting for fi xed rack mount aswell as mobile applications. The DPA73 and DPA153 are built as two channel (Stereo) amplifi ers, with an additionalchannel for powering a subwoofer cabinet. It contains an active crossover network witha frequency of 120Hz and advanced protection circuitry which protects against DCmalfunctioning, short circuit, overheating and overload. The signal input connections are accommodated with balanced XLR connectors andsignal link through with other amplifi ers is possible using the XLR output connectors. Theoperation mode can be selected between Stereo mode, Bridge mode and Parallel mode.The output connections are accommodated with Euro-Terminal blocks.
  • Model Name / Type: DPA73 / Digital Amplifier
  • 8 ohms: 2 x 50 W + 150 W
  • 4 ohms: 2 x 75 W + 225 W
  • THD+N:
  • Signal / Noise: > 100 dB
  • Frequency Response: 20 Hz - 20 kHz
  • Power Supply: 240 V AC / 50 - 60 Hz
  • Dimensions (W x H x D): 483 x 44 x 300 mm
Weight15.5011.104.503.005.406.00DimensionsN/AN/AN/AN/AN/AN/AAdditional information
Weight 15.50 kg
Weight 11.10 kg
Weight 4.50 kg
Weight 3.00 kg
Weight 5.40 kg
Weight 6.00 kg