INTERM QX-4960 Quad Amplifier Built in X-Over

Discontinued

664.01 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Power Output Level QX4960:   8ohm 1kHz (Quad CH) 170W x 4 4ohm 1kHz (Quad CH) 240W x 4 8ohm 1kHz (bridged mono) 480W x 2                                                  (1kHz, 1% THD) Input Sensitivity 0.775Vrms Input Impedance 20kohm Balanced  Frequency Response (±0.5dB) 20kHz ~ 50kHz  T.H.D. (f=20Hz~20kHz) Less than 0.1%  Signal to Noise Ratio 100dB Protection Over heat […]

 

Read more

Power Output Level QX4960:  

8ohm 1kHz (Quad CH) 170W x 4
4ohm 1kHz (Quad CH) 240W x 4
8ohm 1kHz (bridged mono) 480W x 2
                                                 (1kHz, 1% THD)
Input Sensitivity 0.775Vrms
Input Impedance 20kohm Balanced 
Frequency Response (±0.5dB) 20kHz ~ 50kHz 
T.H.D. (f=20Hz~20kHz) Less than 0.1% 
Signal to Noise Ratio 100dB
Protection Over heat and over current, output short, DC fault 
X-Over Frequency 60Hz~2.5kHz
X-Over Cut Off Slope 24dB/Oct
Power Source 100-120VAC or 220-240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
 
Power Consumption 770W
 
Net Weight 17kg/37.5lb
 
Dimensions 482(W) x 88(H) x369(D) mm
/19(W) x 3.5(H) x14.5(D) mm
 

Quad Amplifier – 4 Amp Circuit in the One Unit

Substantial Protection Circuitry

Various Display – Power, Protection, Clip and Signal

Mode Switch – Parallel, Stereo and Bridged Mono

Variable Speed Fan Cooling

Input Connectors – Balanced Combination Jack

Output Connectors – 5-Way Binding Post

Built In 2 Way Crossover
 

Weight 17.00 kg

Reviews

There are no reviews yet.

Be the first to review “INTERM QX-4960 Quad Amplifier Built in X-Over”

Your email address will not be published. Required fields are marked *

Quick Comparison

INTERM QX-4960 Quad Amplifier Built in X-Over removeRAM AUDIO T-1208 Power Amplifier 8x150 Watts removeRAM AUDIO S-4004 Power Amplifier 4x980 Watts removeINTERM QD-4960 4Channel AMPLIFIER 4X240W 4 OHM removeINTERM QD-4480 AMPLIFIER 4X120W removeYAMAHA XM-4080 Power Amplifier 4x80W remove
NameINTERM QX-4960 Quad Amplifier Built in X-Over removeRAM AUDIO T-1208 Power Amplifier 8x150 Watts removeRAM AUDIO S-4004 Power Amplifier 4x980 Watts removeINTERM QD-4960 4Channel AMPLIFIER 4X240W 4 OHM removeINTERM QD-4480 AMPLIFIER 4X120W removeYAMAHA XM-4080 Power Amplifier 4x80W remove
Image
SKUQX-4960T-1208S-4004QD-4960QD-4480H060.00045
Rating
Price 664.01 incl. GR VAT 1,044.57 incl. GR VAT 1,920.75 incl. GR VAT 1,075.00 incl. GR VAT 852.00 incl. GR VAT 957.73 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Only 1 left in stock

In stock

Only 5 left in stock

AvailabilityOut of stockAvailable on backorderAvailable on backorderOnly 1 left in stockIn stockOnly 5 left in stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Power Output Level QX4960:  

8ohm 1kHz (Quad CH) 170W x 4
4ohm 1kHz (Quad CH) 240W x 4
8ohm 1kHz (bridged mono) 480W x 2
                                                 (1kHz, 1% THD)
Input Sensitivity 0.775Vrms
Input Impedance 20kohm Balanced 
Frequency Response (±0.5dB) 20kHz ~ 50kHz 
T.H.D. (f=20Hz~20kHz) Less than 0.1% 
Signal to Noise Ratio 100dB
Protection Over heat and over current, output short, DC fault 
X-Over Frequency 60Hz~2.5kHz
X-Over Cut Off Slope 24dB/Oct
Power Source 100-120VAC or 220-240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
 
Power Consumption 770W
 
Net Weight 17kg/37.5lb
 
Dimensions 482(W) x 88(H) x369(D) mm
/19(W) x 3.5(H) x14.5(D) mm
 

Quad Amplifier - 4 Amp Circuit in the One Unit

Substantial Protection Circuitry

Various Display - Power, Protection, Clip and Signal

Mode Switch - Parallel, Stereo and Bridged Mono

Variable Speed Fan Cooling

Input Connectors - Balanced Combination Jack

Output Connectors - 5-Way Binding Post

Built In 2 Way Crossover
 

• Eight and four channel models with 300W and 150W per channel • Minimal footprint and mass arround 200mm depth and 6 Kg • Optional Add-on card to interface with third party alarm systems with GPIO connections • FCM™ Faulty Channel Management system to avoid entire device shutdown • State-of-the-art layout for maximum performance and reliability • Highly oversized thermal dissipation design for maximum reliability • Superb distortion and noise figures • All channels bridgeable by pairs • Selectable gain in four channel groups (26, 32 and 38dB) • Subsonic filter per channel (35Hz user selectable) • Temperature and signal dependant, intelligent cooling system for minimal noise • Optimal heat extraction due to the air tunneled enclosure and insulator-less power device attachment to the heatsink • Direct connector-less output for maximum quality loudspeaker control • High grade engineering inside with the latest SMD technology • Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection • Critical electronic and mechanical parts selection • Innovative protection systems, FCM™ Faulty Channel Management and SSP™ SOA Sentry Protection • Detented and optionally tamper-proof volume potentiometers • Hi efficiency, two steps Class H Audio topology • Protection, Signal and Clip indicators per channel • Power On and Standby general indicators • Extremely compact, fully featured QuantaPulse Power supply • Low current consumption and heat generation allowing less demanding conditions for multiple amplifier installations • Factory preset worldwide mains voltage power supply • Laser cut four milimeters aluminium front panel • Rugged 2U steel chasis   Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >70dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: T604:1.5/0.8/0.4V - T1204:2.1/1.0/0.5V - T1208:1.4/0.7/0.4V - T2408:2.0/1.0/0.5V Signal to noise ratio: T604:107dB - T1204:110dB - T1208:107dB - T2408:110dB Required AC Mains (@8ohms 1/8 rated power): T604:1A - T1204:1.5A - T1208:1.4A - T2408:2.6A Dimensions (WxHxD): 483x88.9x210 mm - 19x3.5x8.27 inches Weight (Net): T604/T1204: 5.4Kg - 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™
OUTPUT POWER T-604 T-1204 T-1208 T-2408
RMS, 1kHz, 1.0% THD+N
4 ohms 4x 160 W 4x 320 W 8x 150 W 8x 300 W
8 ohms 4x 115 W 4x 220 W 8x 100 W 8x 195 W
Bridge @ 8ohms 2x 320 W 2x 640 W 4x 300 W 4x 600 W
Pink Noise 12dB CF
4 ohms 4x 210 W 4x 415 W 8x 180 W 8x 370 W
 
  The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep. • Ultra-compact and lightweight 2-U high • Laser cut aluminum front panels with integrated carrying handles • Neutrik® XLR input connectors, input and signal link in 2 channel models • Input Link switch: allow daisy-chaining of the input signal • Neutrik® Speakon® output connectors • Detented sealed potentiometers for easy recall of volume settings • ICL™, PMS™, Hi-temp, Signal indicators per channel • Power on and Stand-by leds • Highly versatile with multiple configuration and additional module options • Full PC control via EtheRAM (with EtheRAM Control module) • Switchable ICL™ clip-limiters per channel • Switchable (30-50 Hz) sub-sonic highpass filter per channel • Three-position gain selector (26, 32 or 38 dB) • Dual or bridge mode selector • Twin temperature controlled, back to front cooling fans • Oversized power components (high SOA reserve specification) Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility. Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics: • 2-way stereo crossover (dual mono or single bridged sub output) • 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz) • Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB) • Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB) DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics: • 4 Inputs/4 Outputs or 2 In/2 Out free route configurable. • 24 bits/192 kHz 256x Oversampling Converters. • Output Delay: 0 to 7.1 meters (20.69ms) per channel. • XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel. • EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB). • Gain, Mute and Phase inversion per channel. • RMS Power and Peak Voltage output limiter per channel. • Real Time operation from USB or front panel configuration. Standard Signal Inputs Module EtheRAM Control Module Ethernet Audio Transport (Coming soon) Analog Processor Module DSP44_S Module EtheRAM Control Module AES/EBU Digital Input (Coming soon)
OUTPUT POWER S-1500 S-2000 S-3000 S-4000 S-6000 S-3004 S-4004 S-4044 S-6004 S-6044
1kHz, 1.0% THD
2 ohms 2x880W 2x1190W 2x1570W 2x1950W 2x2950W 4x700W 4x980W - 4x1440W -
4 ohms 2x575W 2x790W 2x1100W 2x1380W 2x2025W 4x500W 4x670W 4x975W 4x1000W 4x1480W
8 ohms 2x325W 2x460W 2x630W 2x810W 2x1250W 4x300W 4x430W 4x690W 4x620W 4x1015W
Bridge @ 4ohms 1760W 2380W 3140W 3900W 5900W 2x1400W 2x1960W - 2x2880W -
Bridge @ 8ohms 1150W 1580W 2200W 2760W 4050W 2x1000W 2x1340W 2x1950W 2x2000W 2x2960W
P. N. 12dB C.F.
2 ohms 2x975W 2x1360W 2x2060W 2x2460W 2x4225W 4x890W 4x1170W - 4x2080W -
4 ohms 2x610W 2x880W 2x1240W 2x1600W 2x2600W 4x580W 4x820W 4x1230W 4x1280W 4x2110W
Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V 3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB 3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A 3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™
Power Output Level QD4960 : 8ohm (Quad Ch)        170W 4ohm (Quad Ch)        240W 8ohm bridged mono   480W Input Sensitivity (8ohm, 1kHz)  0.775Vrms Input Impedance 20kohm Balanced Slew Rate (8ohm, Full Swing) ±30V/?sec Frequency Response (±0.5dB) 20kHz ~ 50kHz T.H.D. (f=20Hz~20kHz, Half Power) 0.03% Signal to Noise Ratio 105dB Damping Factor (8ohm, 1kHz)  100 Rasidual Noise  -85dB Channel Separation (8ohm, 1kHz)  80dB Voltage Gain (4ohm)  26dB 29dB 32dB Power Source  100-120VAC or 220-240VAC ; 50/60Hz (supplied AC mains transformer depends on country requirements) Power Consumption  300W 420W 770W Weight  11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb Dimensions  482(W) x 88(H) x 369(D) mm /19(W) x 3.5(H) x 14.5(D) in

Power Output Level:  QD4480                       

8ohm (Quad Ch)       80W    
4ohm (Quad Ch)       120W    
8ohm bridged mono   240W 

Input Sensitivity (8ohm, 1kHz)  0.775Vrms
Input Impedance 20kohm Balanced 
Slew Rate (8ohm, Full Swing) ±30V/?sec
Frequency Response (±0.5dB) 20kHz ~ 50kHz 
T.H.D. (f=20Hz~20kHz, Half Power) 0.03% 
Signal to Noise Ratio 105dB
Damping Factor (8ohm, 1kHz)  100
Rasidual Noise  -85dB
Channel Separation (8ohm, 1kHz)  80dB
Voltage Gain (4ohm)  26dB 29dB 32dB
Power Source  100-120VAC or 220-240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
Power Consumption  300W 420W 770W
Weight  11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb
Dimensions  482(W) x 88(H) x 369(D) mm
/19(W) x 3.5(H) x 14.5(D) in
 

Power Output Level 20Hz - 20kHz 1kHz THD+N=0.2%, 8Ω 80W x 4
Power Output Level 20Hz - 20kHz 1kHz THD+N=0.2%, 4Ω 115W x 4
Sensitivity, RL=8. Att.max +4dB
S/N Ratio, 20Hz-20kHz (DIN AUDIO) 100dB
Idle Power Consumption 40W
1/8 Power Consumption (4Ω) 500W
Power Bandwidth, (Half power THD+N=0.5%) 10Hz – 40kHz
Intermodulation Distortion, 60Hz: 7kHz, 4:1, half power 0.1%
Frequency Response, f=20Hz-20kHz -0.5dB, 0dB, 0dB
Residual Noise, 20Hz-20kHz(DIN AUDIO) -70dB
Voltage Gain, 8Ω, f=1kHz 100
Sensitivity, ATT. max 26dB
Maximum Input Voltage 22dB
Input Impedance 30kΩ (balance) 15kΩ (unbalance)
Controls, Front panel POWER switch (push on/push off), attenuator (31position) x 4
Controls, Rear panel MODE switch (STEREO/BRIDGE/PARALLEL) x 2 HPF switch (OFF/20Hz/55Hz 12dB/oct) x 2
Connectors, Output 5–way binding post/ch
Connectors, DATA PORT D-sub15P, Monitor:Output Level/ch,Active/ch, Model Detect Control:Mute/ch
Connectors, Power AC inlet x 1
Indicators, POWER x 1 (Green)
Indicators, SIGNAL x 4(Green)
Indicators, CLIP/LIMIT x 4 (Red)
Indicators, PROTECT/MUTE x 4 (Red)
Load Protection POWER switch on/off mute, DC-fault output relay off
Power Requirements UC: 120V / 60Hz,
Weight 10kg (22 lbs.)
Dimensions (W x H x D) 480 x 88 x 412.2 mm (18-7/8" x 3-7/16" x 16-1/4“) 

Weight17.00 kg6.20 kg8.50 kg17.00 kg15.50 kg10.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 17.00 kg
Weight 6.20 kg
Weight 8.50 kg
Weight 17.00 kg
Weight 15.50 kg
Weight 10.00 kg