ION CZ-800-10 P-mount CR-800 Numark Cartridge with stylus

• Grasp both sides of the stylus and pull forward to remove stylus
• Grasp both sides of the stylus and slide up and back to attach stylus

• Remove stylus from old Cartridge
• Grab headshell with thumb under front tab and index finger on rear of head shell with left hand.
• Grab old cartridge with right thumb and index finger. Carefully Pull down and forward with right hand while while pulling up with left hand.
• Carefully disconnect wires from rear of cartridge pulling from metal tabs.
• Remove stylus guard and stylus from new cartridge
• Connect wires on new cartridge. the single metal connector with black wires goes on the bottom posts that are closer together.
• From rear view, as you would install the cartridge - The red wire goes on the right upper post, the white wire goes on the left upper post.
• Reconnect cartridge to headshell by placing cartridge beneath headshell with thumb below cartridge and index finger on top of headshell.
• Carefully squeeze the two together. a \'light\' snap occurs and the cartridge should fit snug.
• Reattach new stylus to new cartridge.

• Classic LP
• Max LP
• Mobile LP
• iPTUSB
• Archive LP
• Forever LP
• Live LP
• Power Play
• Quick Play Flash
• Quick Play LP
• Vinyl Motion
• Vinyl Motion Deluxe
• Air LP
• Duo Deck
• iLP
• LP 2 GO
• CD Direct
• iProfile
• Profile LP
• Profile Pro

Professional plug-in catrridge designed for use Serato Scrach Live and other digital interface formats using time coded vinyl. Set includes two cartridges with two styli, cleaning brush and carry case.

ORTOFON CONCORDE DIGITRACK KIT WITH 2 STYLI

Ortofon\'s Red Digitrack Cartridge is designed specifically for coded vinyl. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for coded vinyl with low wear, high output and the best mix and scratch ability.

With the introduction of the DigiTrack cartridge, Ortofon continues to break new ground. Finally, technology has become an art. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3\'s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for code vinyl. Low wear, high output and no more lugging around crates of records.

Our engineers spent hundreds of hours studying the characteristic of time coded vinyl from such products as Serato Scratch, FinalScratch, Virtual DJ, PCDJ Scratch and many others. They\'ve designed a product that will pick up all the coded information while leaving minimal wear on your record. Combine superior output and tracking ability and you\'ve got a cartridge that will perform flawlessly every time. Ideal for both mixing and scratching. The DigiTrack will keep you in the groove all night long.

TECHNICAL DATA CONCORDE DIGITRACK

Output voltage at 1000 Hz,
5cm/sec.
8 mV
Channel balance at 1 kHz
1,5 dB
Channel separation at 1 kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range
20-20.000 Hz
Frequency response
20-18.000 Hz -3 /- 2dB
FIM distortion at recommended tracking force,
DIN 45.542
< 1%
Tracking ability at 315Hz at
recommended tracking force
80 m
Compliance, dynamic, lateral
12 m/mN
Stylus type
Spherical
Stylus tip radius
R18
Equivalent stylus tip mass
0,6 mg
Tracking force range
2-4 g (20-40 mN)
Tracking force, recommended
3,0 g (30 mN)
Tracking angle
20
Internal impedance, DC resistance
1325 Ohm
Internal inductance
765 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge colour, body/stylus
Red/Red
Cartridge weight
18,5 g
Replacement stylus unit
Digitrack

• Combining the Shure unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl.
• With a 9.5 mV output, the M44-7 produces powerful, resonant sound.

• Skip Resistance: ultra high
• Output: ultra high
• Record Wear: ultra low
• Sound Emphasis: big bass

The versatile M92E fits both of the major types of tone-arm mounts in use today. This high-value model offers faithful sound reproduction at a very attractive price. A natural bi-radial diamond tip teamed with a tubular aluminum alloy stylus cantilever accurately traces the grooves of your records for a difference you can hear.

Fits both of the major types of tonearm mounts in use today, making it compatible with over 85% of turntables. Biradial Diamond Tip + Tubular Aluminum Alloy Stylus Cantilever.  Accurately traces the grooves of your records for smooth sound throughout the frequency range.
    Universal mount
    Biradial diamond tip
    Tubular aluminum alloy stylus cantilever
    Standard mount adapter
    Mounting hardware
    Stylus guard
    Low Tracking Force
    Minimizes wear on your irreplaceable vinyl collection

Shure M92E Excellent high-value cartridge with smooth sound. Fits turntables with P-mount tone arms or standard ½ inch mount tone arms.

• Type: MM
• Fixing: P-mount
• Output voltage: 5,0mV bei 1kHz, 5cm/sec.
• Amplifier-connection: Phono MM
• Frequency range: 20-18.000Hz
• Material: diamond, bonded
• Stylus type: elliptical 0.4 x 0.7 mil
• Tracking force range: 0,75-1,5g
• Tracking force, recommended: 1,25g
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 200-300pF
• Weight: 7,3g*

For DJs that require increased tracking ability, the Scratch is up to the task.  Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces.  With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.