| Content | Description
- Class-D amplifier module for installation inside the VIBE-10 Mk2 & VIBE-12 Mk2 speakers
- All you need is a screwdriver and 5 minutes of your time to make the transformation, no technical skills required!
- High output power: 300Wrms @ 8ohm ~ 500Wrms @ 4ohm
- Balanced / unbalanced line input/output (XLR) with volume control.
- 100Hz low-cut filter, used to cut low frequencies to the speaker cabinet when used in combination with an active subwoofer.
- Speakon output for optional passive 8ohm cabinet. (preferable same model)
- IEC input mains connector with integrated switch.
Technical Information
- Power 8Ω (1kHz, THD+N
- Power 4Ω (1kHz, THD+N
- Freq. Resp. (+/-2dB): 20 – 20.000Hz
- Input Sensitivity line: 1V
- Input impedance: 20 kΩ
- S/R ratio (A-weighted): >86dB
- Damping factor: 320
- Cooling: Magnetic field fan
- Line input / output: Balanced XLR 3pin
- Outputs: Speakon +1/-1
- Protections: Thermal, Limiter, Current limiter, short circuit, DC-protection
- Fuse (5x20mm): T5AL / 250V
- Power supply: AC230V / 50Hz
- Power consumption (peak/4Ω ): 630W
- Dimensions (mm): 275x145x72mm
- Hole cutout (mm): 253x123mm
- Weight (without mains cable): 2kg
| Adam Hall Stands SM 701
Cabinet Flange
Top hat
Product type
Speaker Construction Accessories
Type
Cabinet Flange
Material
steel
Surface
powder coated
Colour
Black
Suitable for tube diameter
35 mm
Flange size
110 mm
Installed depth / installation height
58 mm
Tiltable
no
With screw clamp
no
Weight
0,295 kg |
HY-CW1W
Ceiling mountaining bracket for indoor use |
HY-CW1W
Ceiling mountaining bracket for indoor use |
Shure UA-870WB Directional UHF Antenna
A Directional Antenna for Shure U4 and ULX Receivers!
The Shure UA870 is an active UHF wireless directional antenna featuring a log periodic dipole array.
When compared to an omnidirectional 1/2-wave antenna, the cardioid pattern provided by the UA870
offers enhanced reception of the desired coverage area and greater rejection of RF signals outside the coverage area.
To compensate for coaxial cable signal loss, the UA870 has an on-board amplifier that offers user
selectable 3 or 10dB gain. The gain setting is indicated by two LEDs. Remote 12 Vdc power for the
antenna amplifier is provided by a Shure U4 receiver or a Shure UA840 antenna distribution system
through the connecting coaxial cable.
The UA870 can be mounted on a microphone stand, suspended from the ceiling, or mounted to a
wall using the integrated swivel adapter bracket. The UA870 is weather resistant for use outdoors.
For best diversity performance, use two UA870 antennas.
The UA870WB is a UHF wideband (470-900MHz) active directional antenna for U4S, U4D, ULXP
and ULXS receivers or UA844 and UA845 antenna distribution systems. | Machined from high grade aluminium, the boom pole is designed for applications where
a 3m extension pole for shotgun microphones is required.
Attaches to the SM3 Shock Mount, RM5 Stand Mount (NT5, NTG-1 & -NTG-2) and VideoMic
via its 3/8? thread or any standard 3/8? threaded fitting. ( Length: 0.84 m ~ 3 m or 33? ~ 10?) |
Reviews
There are no reviews yet.