| Content |
Frequency Range (-10 dB): 40 Hz – 4.2 kHz
Frequency Response (±3 dB): 47 Hz - 3.0 kHz
Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC): 600 W (2400 W peak), 100 hrs
Maximum SPL: 50 Hz –125 Hz
125 Hz – 800 Hz: 126 dB-SPL cont avg
(dB-SPL, 1W @ 1m): 50 Hz – 125 Hz
125 Hz – 800 Hz: 97 dB
Nominal Impedance: 8 ohms
Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation): 548 x 561 x 657 mm
Net Weight: 25.9 kg (57 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
The TX1181 is the perfect companion sub to the TX1122 and TX1152 for compact and portable performance. Using the proven EVS18S woofer, the TX1181 effortlessly provides the low-frequency energy needed to keep up with Tour X boxes, as well as many other EV loudspeaker products. The integrated, low-pass input filter allows for single amp drive, and the high-sensitivity and excellent power handling don\'t require a large, expensive amplifier to generate high SPL.
The TX1181\'s unique Backbone grille not only looks great, but also provides greater strength and damage resistance than simple grille block designs. Proprietary, ergonomically correct handles and angled input panels, and integrated, screw-in-style pole-mount make the TX1181 easy to transport and employ in a variety of applications.
Specifications
| Frequency Response (-3dB) |
50 - 160 Hz |
| Frequency Response (-10dB) |
45 - 700 Hz |
| Recommended High-Pass Frequency |
30 Hz |
| Sensitivity 1W/1m |
100 dB |
| Max. SPL / 1m (calc) |
132 dB |
| System Power Handling (continuous/program/peak) |
500/1000/2000 Watts |
| LF Transducer |
EVS18S |
| Nominal Impedance (Passive) |
8 Ohms |
| Minimum Impedance |
7.5 Ohms |
| Enclosure Material |
Plywood and MDF with EVCOAT |
| Color |
Black |
| Flying |
No |
| Input Connections |
Parallel Neutrik® NL4 |
| Internal Crossover |
Yes |
| Speaker Type |
Subs |
| Weight Net |
33.8 kg ( 74.52 lbs ) |
| Dimensions (HxWxD) |
769 x 439 x 591 mm
(30.28" x 17.28" x 23.27“) |
| Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 18 S
Description High-power-capacity 18" subwoofer with high-quality
Description crossover for powerful low-end kick
Power handling capacity RMS: 500 W
Power handling capacity Program: 1000 W
Frequency response within +/-3dB 48 Hz ? 150 Hz (internal wedge)
Frequency response @ -10dB 38 Hz ? 150 Hz (internal wedge)
Speaker 1 x 18“
Impedance 4 Ohm
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 129 dB
Crossover frequency 150 Hz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Dimensions (WxHxD) 53 cm x 61 cm x 64 cm
Dimensions (WxHxD) 20 3/4? x 24? x 25 1/4?
Weight 41.6 kg
Weight 91.52 lbs | JBL VRX 918S 18'' 1600W power rating continuous, High Power Flying passive Subwoofer
Key Features :
Integral rigging hardware for simple connection of VRX932LA line-arrays and optional array frame.
18 inch, 2268H Differential Drive? woofer for extended low-frequency output
Large port area for reduced distortion
20 mm threaded pole socket for solid, secure satellite speaker mounting
Specifications:
|
|
|
| Frequency Range |
: |
31 Hz ? 220 Hz |
| Frequency Response |
: |
34 Hz ? 220 Hz |
| Recommended Crossover Frequencies |
: |
80 Hz, 24 dB / octave HPF
80 Hz, 24 dB / octave LPF |
| Power Rating (Continuous / Program / Peak) |
: |
800 W / 1600 W / 3200 W |
| System Maximum SPL |
: |
130 dB SPL peak |
| System Sensitivity |
: |
95 dB SPL |
| LF Driver |
: |
1 x JBL 2268H 457 mm (18 in) Differential Drive woofer |
| Nominal Impedance |
: |
8 ohms |
| Active Tunings |
: |
Tunings available at www.jblpro.com |
| Enclosure |
: |
Rectangular, 18 mm, 13-ply birch plywood |
| Suspension / Mounting |
: |
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit |
| Finish |
: |
Black DuraFlex? finish |
| Grille |
: |
Powder coated, black, 16-gauge perforated steel with
acoustical transparent charcoal foam backing. |
| Input Connectors |
: |
Neutrik? Speakon? NL-4 (x2) |
| Dimensions (H x W x D) |
: |
508 mm x 597 mm x 749 mm
(20.0 in x 23.5 in x 29.5 in) |
| Net Weight |
: |
37 kg (81 lb) |
| Optional Accessories |
: |
SRX718S-CVR: Pull-over padded cover
SS4-BK: Adjustable, heavy-duty pole, M20 thread to
35 mm
WK-4: Caster kit
VRX-AF: Array Frame Kit
M-10 eyebolt kit |
|
The S4022 is a compact, high-output band-pass subwoofer dedicated to permanent installations.
The system is equipped with two advanced 12” RCF precision woofers mounted in a clam-shell internal chamber.
The two transducers couple to achieve tight and maximised output. Each 12” features massive ceramic magnets and 3” copper voice coil.
The system is capable of producing a Max SPL of 131 dB and handles 800 Watts AES.
| Features |
|---|
| Compact, arrayable, 2 x 12" bandpass subwoofer system | | 131 dB max SPL, 800 Watt AES | | Equipped with RCF high power 2 x12“, 3" voice coil woofers | | Extensive internal bracing, 8 x M10 mounting points | | Recessed handles | | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | | Epoxy powder coated front grille | | Dedicated to permanent installation |
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 40 Hz | ÷ 0.2 kHz | | Max SPL @ 1m: | 131 dB | | | System Sensitivity: | 97 dB | | | Nominal Impedance: | 4 Ω | | | Power Handling: | 800 Watt | | | Peak Power Handling: | 2400 Watt | | | Recommended Amplifier: | 1600 | |
| TRANSDUCERS |
|---|
| Woofer: | 2 X 12" woofer, 3" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 400 Watts AES | | | Sensitivity: | 97 dB | |
| INPUT SECTION |
|---|
| Input connector: | 2 x Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 15 mm birch plywood construction | | | Hardware: | 8 x m10 mounting points, 2 x recessed | | | Handles: | 2 seitlich | | | Grille: | Custom perforated steel grille | | | Colour: | Black, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 500 / 19.68 mm/inch | | | Width: | 650 / 25.59 mm/inch | | | Depth: | 580 / 22.83 mm/inch | | | Net Weight: | 38 / 83.77 Kg/Lbs |
|
FB-120B
Power Handling Capacity: Continuous pink noise ? 200W, continuous program ? 600W
Impedance: 8Ω
Sensitivity: 90dB (1W/m) free sound field, 96dB (1W/m) 1/2 free sound field
Frequency Response: 40Hz-1.2kHz (+/-10dB)
Dimensions: 16“?16“?17.75" (W?H?D)
Weight: 15kg |
Reviews
There are no reviews yet.