Content |
Ηχοστήλη επέκτασης Line Array για χρήση σε συνδυασμό με το CBT 70J, 1000W System power, 4 x 5ΆΆ woofers, 45Hz-20kHz (system)-130dB/136 peak (system)- 8Ω. Περιέχεται βάση στήριξης. Καμπίνα fiberglass με 10x M6 υποδοχές στήριξης. Διαστάσεις ΥΠΒ : 695 x 168 x 235 mm. Χρώμα Μαύρο |
The HX-5W-WP is a 2-way compact speaker system that permits both constant directivity control over a wide frequency range and changes in directivity. It is ideal for reproducing clear sound in spaces with long reverberation times or high background noises. The HX-5W-WP is designed for outdoor use.
Enclosure | Sealed type | Power Handling Capacity | Continuous pink noise: 200 W, Continuous program: 600 W | Rated Impedance | 8 Ω | Sensitivity (1 W, 1 m) | 96 dB (60゜ mode), 97 dB (45゜ mode), 98 dB (30゜ mode), 99 dB (15゜ mode) * | Frequency Response | 95 - 20,000 Hz (-10 dB) (60゜ mode), 100 - 20,000 Hz (-10 dB) (45゜ mode),
105 - 20,000 Hz (-10 dB) (30゜ mode), 110 - 20,000 Hz (-10 dB) (15゜ mode) | Crossover Frequency | 4 kHz | Directivity Angle | Horizontal: 100゜ (over 2000 Hz)
Vertical: 60゜ (over 800 Hz), 45゜ (over 1.2 kHz), 30゜ (over 1.6 kHz),
15゜ (over 3.2 kHz) variable | Speaker Component | Low frequency: 12 cm cone-type × 4, High frequency: Balanced dome-type × 12 | Speaker Cord | 2-core cabtyre cord with diameter of 6 mm | Water Protection | IPX4 (Install with the every speaker module downward.) | Operating Temperature | -15%%dc to +50%%dc | Finish | Enclosure: Polypropylene, white
Punched net: Surface-treated steel plate, white, rust proof coating | Dimensions | 408 (W) × 546 (H) × 342 (D) mm | Weight | 16 kg | Accessory | Hanging bracket …2, Hex. wrench …1 | Option | Matching transformer: MT-200
Speaker mounting bracket: HY-PF1WP, HY-CW1WP, HY-WM1WP, HY-WM2WP,
HY-CN1W-WP | * (Factory-preset: 60゜ mode)
|
HX-5W
Variable Dispersion Speaker System. Four speaker modules ensure high power and high quality. The changeable orientation of each of the four speaker modules independently allows the directivity angle of the speaker system to be adjusted. Built-in passive network ensures appropriate sound quality. Ideal for both permanent and temporary installations, including both vertical and horizontal positioning. Equipped with a convenient carrying handle. Can be mounted directly on a wall or suspended by wire, chain or shackle with no need to use optional brackets. Optional mounting brackets allow use in a wide variety of applications, including suspension, ceiling mounting, wall mounting, and speaker stand mounting. Mounting procedures are described in the instruction manuals enclosed with the mounting bracket or stand adapter.
Specifications: Enclosure Type Bass Reflex Power Handling Continuous Pink Noise; 200W: Continuous Program; 600WRated Impedance 8ohms Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode) Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode) 75 to 20,000 Hz (45° mode) 80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode) Crossover Frequency 4kHz Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz), 45° (over 1 .2 kHz), 30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable Speaker Component Low frequency: 12 cm (5“) cone-type x 4 High frequency: Balanced dome-type x 12 Input Terminal Speakon NL4MP x 2 and M4 screw terminal Finish (Enclosure) Polypropylene, white Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches Weight 16kg Accesory Hanging bracket x 2, Hex. wrench x 1 Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB, HY-CW1W,HY-WM1W,HY-WM2W,HY-CN1W, Speaker stand adapter:HY-ST1 |
The SR-S4LWP is a two-way line array speaker ideal for long distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
Enclosure | Sealed type | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | Sensitivity | 94 dB (1 W, 1 m) | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | Crossover Frequency | 3,500 Hz | Directivity Angle | Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height) | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm,
conductor cross section: 1.25 m㎡, 4-core cable, 3 m | Operating Temperature | -10℃ to +50℃ | Water Protection | IPX4 | Finish | Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel (SUS304), white, paint | Dimensions | 160 (W) × 895 (H) × 255 (D) mm (excluding connected cable) | Weight | 16 kg | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4WP,
Wall mounting bracket: SR-WB4WP, Wall tilt bracket: SR-TB4WP,
Protection pad: SR-PP4, Digital processor: DP-0206 |
|
The SR-C15BWP Sub-woofer system is designed to be used in conjunction with the SR-C8LWP or SR-C8SWP Line Array Speaker. Recommended digital processor is the DP-0206 (optional).
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 450 W | Rated Impedance | 8 Ω | Sensitivity | 93 dB (1 W, 1 m) | Frequency Response | 40 - 400 Hz (when driven with the optional DP-0206's recommended parameters) | Crossover Frequency | 125 Hz (when driven with the optional DP-0206's recommended parameters) | Speaker Component | 38 cm (15“) cone-type | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34“),
conductor cross section: 1.25 m㎡ (0.05“), 4-core cable, 3 m (9.84 ft) | Operating Temperature | -10℃ to +50℃ (14゜F to 122゜F) | Water Protection | IPX4 | Finish | Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint | Dimensions | 526.6 (W) × 594.8 (H) × 550 (D) mm (20.73" × 23.42" × 21.65“) | Weight | 41 kg (90.39 lb) | Accessory | M8 connection bolt …4 | Option | Rigging frame: SR-RF8WP
Digital processor: DP-0206 |
|
The VT4882 is designed to deliver high quality soundreinforcement of sub-low frequencies for live music and a variety of sound reinforcement applications.
Features : | | Specifications : | - Advanced Technology Components: Differential Drive® Neodymium Magnet, Dual Voice Coil, Direct Cooled™ cone transducers.
| - Advanced Construction Techniques with PlyMax® provide exceptionally rigid, lightweight enclosure.
| - Rugged DuraFlex™ exterior finish; Weatherized components.
| - Integrated Suspension System, premium aluminum fixtures provide rigid, reliable hanging arrays designed for vertical orientation at various angles.
| | |
Frequency Range | : | 28 Hz - 120 Hz (-10dB) |
| Frequency Response | : | 32 Hz - 110 Hz (± 3 dB) |
| Continuous Power Rating | : | 2000W |
| Sensitivity | : | 95 dB (1w/1m) |
| Nominal Impedances | : | 2 x 8 ohms |
| Dimensions (W x H x D) | : | 1013 mm x 457 mm x 858 mm
(39.9" x 18" x 33.8“) |
| Weight | : | 53.5 kg (118 lb) | | |
|
Reviews
There are no reviews yet.