Content | JBL Control 5, Pro VIII, Factory Speaker Woofer Part # C5003, C5002, C5006
- JBL Control 5, Pro VIII, Factory Speaker Woofer Part # C5003
- This is a complete brand new JBL, Control 5 woofer
- Voice coil: 1" (25mm)
- Diameter: 6.5" (165mm)
- Impedance: 3.9 ohms
- Treated paper cone with foam edge
- Fits JBL Driver and Cabinet Models
- JBL: Control 5, C-5003, C5002, C 5006, Pro VIII, Pro 8
|
- 93 dB Sensitivity 1 W / 1 m
- 130 W Power Handling
- 1.5" Sandwich Voice Coil
- Double treated Cone for Water Protection
- Neodymium Magnet System
- Twin Aluminum demodulating Rings for ultra low Distortion
- Optimal for compact 2- or 3-way Systems
|
- 130 W + 25 W Power handling
- 1.5" + 1" voice coil
- Single point source providing coherent wave front
- 900 conical dispersion
- Optimal for compact 2-way systems
|
Recone kit for FPW6N8120
|
Recone kit for FP6PR150
|
Nominal Specifications
* Nominal Diameter 6“, 160 mm
* Overall Diameter 7.34/6.37“, 186.5/162 mm
* Bolt Circle Diameter 6.77“, 172 mm
* Baffle Cutout Diameter 5.78“, 147 mm
* Depth 3.43“, 87.2 mm
* Flange and Gasket Thickness 0.29“, 7.5 mm
Electrical Specifications
* Minimum Impedance 6.6 Ohm
* Nominal Impedance 8 Ohm
* Nominal Power Handling*** 150 W
* Maximum Power Handling**** 300 W
* Sensitivity (1W/1m) 97 dB
* Frequency Range 100 - 5000 Hz
* Voice Coil Diameter 5“, 52 mm
* Winding Material Aluminium
* Former Material Glass Fiber
* Winding Depth 0.26“, 6.66 mm
* Magnetic Gap Depth 0.24“, 6 mm
* Flux Density 1.35 T
THIELE & SMALL Parameters
* Resonant Frequency (fs) 100 Hz
* DC Resistance (Re) 5.5 Ohm
* BL Product (BL) 11.6 N/A
* Diaphragm Mass inc. Airload (Mms) 13.5 grams
* Mechanical Compliance of Suspension (Cms) 0.19 mm/N
* Rms 0.96 Kg/s
* Electromagnetic Q (Qes) 0.35
* Mechanical Q (Qms) 8.80
* Total Q (Qts) 0.33
* Compliance Equivalent Volume (Vas) 0.20 ft³, 5.80 dm³
* Surface Area of Cone (Sd) 5.82“², 147.8 cm²
* Maximum Linear Excursion (Xmax)* 2.3 mm
* Xdamage** 11.6 mm
* Coil Inductance (Le) 0.28 mH
* Diaphragm mass (Mmd) 12.7 g
* Eta Zero 1.63 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
Reviews
There are no reviews yet.