JBL LF EON1500/M115-8

313.02 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: LFEON1500M1158 Category:
Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “JBL LF EON1500/M115-8”

Your email address will not be published. Required fields are marked *

Quick Comparison

JBL LF EON1500/M115-8 removeB & C Speakers 15-PK40 Woofer 15 inch 400WRMS 99dB removeEMINENCE ALPHA-15 A 15" 200 W 8 Ohm SPEAKER removeJBL 2226J 15" High-Power LF Driver 16 Ohm removeJBL CONE EON POWER 15 removeJBL CONE EON 15 PASSIVE remove
NameJBL LF EON1500/M115-8 removeB & C Speakers 15-PK40 Woofer 15 inch 400WRMS 99dB removeEMINENCE ALPHA-15 A 15" 200 W 8 Ohm SPEAKER removeJBL 2226J 15" High-Power LF Driver 16 Ohm removeJBL CONE EON POWER 15 removeJBL CONE EON 15 PASSIVE remove
Imagem115-8 jbl woofer speaker m115-8arecone kit jbl eon15 c8reon15recone kit jbl eon15 c8reon15
SKULFEON1500M115815-PK40EA15A2226JJBL-C2REON15PJBL-C8REON15
Rating
Price 313.02 incl. GR VAT 280.00 incl. GR VAT 172.00 incl. GR VAT 469.00 incl. GR VAT 270.06 incl. GR VAT 346.18 incl. GR VAT
Stock

Available on backorder

Only 2 left in stock

In stock

Available on backorder

Available on backorder

AvailabilityAvailable on backorderOnly 2 left in stockIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentHigh efficiency 15" woofer with a very flat frequency response up to 2 kHz and high power handling (800W). Good LF performance, smooth voice response, and compatibility with compact bass-reflex enclosures, the 15 PK 40 achieves perfect balance in two-way systems. Specifications Nominal Diameter 380 mm (15 in) Nominal Impedance 8 Ω Minumum Impedance 6.2 Ω Power Handling (50 –500 Hz) Nominall 400 W Continuous Program2 800 W Sensitivity (1W/1m)3 99 dB Frequency Range 50-2000 Hz Voice Coil Diameter 76 mm (3 in) Winding Material Copper Former Material Glass Fibre Winding Depth 16 mm (5/8 in) Magnetic Gap Depth 9 mm (11/32 in) Flux Density 1.1 T Thiele & Small Parameters4 Fs 47 Hz Re 5.1 Ω Qes 0.33 Qms 5.1 Qts 0.31 Vas 140 dm3 (4.9 ft3) Sd 855 cm2 (132.5 in2) η0 4.2% X max ± 4 mm X var ± 6 mm Mms 84 g Bl 19.7 T·m Le 2.3 mH Mounting and Shipping Information Overall Diameter 394 mm (15.5 in) Bolt Circle Diameter 374 mm (14.6 in) Baffle Cutout Diameter 355 mm (13.9 in) Depth 162 mm (6.4 in) Flange and Gasket Thickness 16 mm (5/8 in) Net Weight 8.3 kg (18.3 lb) Shipping Weight 9.6 kg (21.1 lb) Shipping Box 450x450x200 mm (17.7x17.7x8 in) 1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. Loudspeaker in free air. 2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average SPL from 200 to 2000Hz. 4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.Recommended for professional audio mid-range applications in a sealed cabinet, or as a mid-bass in a ventedsatellite enclosure.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
1.5 "
Voice Coil
38.1 mm
Overall diameter
384.8 mm
Pitch Circle Diameter
369.9 mm
Cut- out Measurement
352.3 mm
Diameter of fixing holes
6.4 mm
Depth
148 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
200 W
maximum rated load
400 W
Sensitivity (1 W / 1 m)
97 dB
Frequency response
46 - 3500 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
6.35 mm
Fs (Resonance Frequency)
41 Hz
Re (DC resistance)
5.88 Ohm(s)
Qms (mechanical quality)
7.23
Le (inductance of the voice coil)
0.84 mH
Qes (electrical quality)
1.53
Qts (overall quality)
1.26
Vas (equivalent volume)
260
Mms (moving mass)
59 g
BL (power factor)
7.7 T/m
Xmax (maximum displacement)
3.8 mm
Cms (elasticity of the suspension)
0.25 mm/N
Sd (membrane area)
856.3 cm²
Weight
3,625 kg
 

The 2226J 15" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: *Power handling: 600 watts RMS *Voice coil diameter: 4" *Nominal impedance: 16 ohms *Frequency Range: 30-2,500 Hz *Magnet assembly weight: 15 lbs. *Fs: 40 Hz *SPL: 97 dB 1W/1m *Vas: 6.2 cu. ft. *Qms: 5.0 *Qes: 0.33 *Qts: 0.31 *Xmax: 7.6 mm *Dimensions: Overall Diameter: 15-1/4“, Cutout Diameter: 14“, Mounting Depth: 5-1/2“.

Weight1.00 kg6.00 kg3.60 kg10.00 kg1.00 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 6.00 kg
Weight 3.60 kg
Weight 10.00 kg
Weight 1.00 kg
Weight 1.00 kg