Content | The tracking force on this stylus is set heavier than Shure’s genuine products to reduce needle jump from scratching.
Be sure to set the proper tracking force when applying (3.5g-4.5g)
100% phosphorescent pigment (Lumi Nova) is used in the resin, which will stay lit by exposing it to natural or fluorescent light!
Shines at a fixed brightness when exposed to black light
Cantilever |
Aluminum |
Cartridge number |
M44-7 |
Tracking Force |
3.5 – 4.5 g |
Tip |
Conical Stylus |
Type |
Moving Magnet |
| Stylus 305
Technical data |
|
Frequency range |
20-20.000 Hz |
Frequency response |
20-18.000 Hz + 2 / - 3 dB |
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
spherical |
Stylus tip radius |
r/R 8/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,5-2,0 g (12,5-20 mN) |
Tracking force, recommended |
1,5 g (15 mN) |
Tracking angle |
20° |
Stylus colour |
Grey |
|
|
Recommended for following cartridges |
Series 305 Universal |
*) Typical value |
DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 2 dB Channel separation at 1kHz - 23 dB Channel separation at 15 kHz - 15 dB Frequency range at -3dB - 20-22.000 Hz Frequency response - 20-20.000 Hz +/-2 dB Tracking ability at 315 Hz at recommmende tracking force - 80 μm Compliance, dynamic lateral - 9 μm/m N Stylus type - Special Elliptical Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN) Tracking force recommended - 3,0 g (30 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-600 pF Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
| Stylus 2M Blue
Technical data |
|
Frequency range |
20-25.000 Hz |
Frequency response |
20-20.000 Hz + 2 / - 1 dB |
Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Nude Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,6-2,0 g (16-20 mN) |
Tracking force, recommended |
1,8 g (18 mN) |
Tracking angle |
20° |
Stylus colour |
Blue |
|
|
Recommended for following cartridges |
2M Blue |
*) Typical value | Ortofon 520MKII Stylus Technical Data
- Frequency range 20-23.000 Hz
- Frequency response 20-20.000 Hz + 2 / - 3 dB
- Tracking ability at 315Hz at recommended tracking force 70 µm
- Compliance, dynamic, lateral 25 µm/mN
- Stylus type Nude Elliptical
- Stylus tip radius r/R 8/18 µm
- Equivalent stylus tip mass 0,3 mg
- Tracking force range 1,25-1,75 g (12,5-17,5 mN)
- Tracking force, recommended 1,5 g (15 mN)
- Tracking angle 20°
- Stylus colour Black
- Recommended for following cartridges Series 520 Mkll, 520, 520 P
|
|
Ortofon 14 Stylus Technical Data
Frequency range 20-22.000 Hz
Frequency response 20-20.000 Hz + 2 / - 2 dB
Tracking ability at 315Hz at recommended tracking force *) 70 µm
Compliance, dynamic, lateral 25 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,0-1,5 g (10-15 mN)
Tracking force, recommended 1,25 g (12,5 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges TM 14U |
|
Kennra –
THA SOUND.. AND DURABILITY IS AMAZING… HIGHLY RECOMMEND…. IM SETTING TO GET THA GLOW N THA DARK ONES ….