JTS CX-509 Low Profile Condenser Instrument Microphone

55.45 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Type     Uni-directional Condenser Frequency Response     30~18,000 Hz Sensitivity (at 1,000Hz)     -65dB*(0.56mV)*0dB=1V/μbar Impedance     220Ω Max. SPL for 1% T.H.D.     130 dB Signal-To-Noise Ratio     70dB Output Connector     3P XLR(M) (power module) Phantom Power Requirements     9-52 VDC Current Consumption     ≤3mA Weight     60 grams (2.11oz) Dimensions     Ø19mm (W)* […]

 

Read more

Type     Uni-directional Condenser
Frequency Response     30~18,000 Hz
Sensitivity (at 1,000Hz)     -65dB*(0.56mV)*0dB=1V/μbar
Impedance     220Ω
Max. SPL for 1% T.H.D.     130 dB
Signal-To-Noise Ratio     70dB
Output Connector     3P XLR(M) (power module)
Phantom Power Requirements     9-52 VDC
Current Consumption     ≤3mA
Weight     60 grams (2.11oz)
Dimensions     Ø19mm (W)* 79mm (H)

Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “JTS CX-509 Low Profile Condenser Instrument Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

JTS CX-509 Low Profile Condenser Instrument Microphone removeSENNHEISER E-906 SUPER-CARDIOID DYNAMIC MICROPHONE removeELECTRO VOICE PL33 Kick-Drum Microphone, Dynamic, Supercardioid removeAKG C 414-XLII/ST Matched Pair removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeNPG CB-410 Instrument Microphone 48V remove
NameJTS CX-509 Low Profile Condenser Instrument Microphone removeSENNHEISER E-906 SUPER-CARDIOID DYNAMIC MICROPHONE removeELECTRO VOICE PL33 Kick-Drum Microphone, Dynamic, Supercardioid removeAKG C 414-XLII/ST Matched Pair removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeNPG CB-410 Instrument Microphone 48V remove
Image
SKUCX-509H10SE00105001808C 414-XLII STLDWS1000MWCB-410
Rating
Price55.45 incl. GR VAT 189.00 incl. GR VAT 110.00 incl. GR VAT 2,100.00 incl. GR VAT 108.04 incl. GR VAT 47.11 incl. GR VAT
Stock

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Type     Uni-directional Condenser
Frequency Response     30~18,000 Hz
Sensitivity (at 1,000Hz)     -65dB*(0.56mV)*0dB=1V/μbar
Impedance     220Ω
Max. SPL for 1% T.H.D.     130 dB
Signal-To-Noise Ratio     70dB
Output Connector     3P XLR(M) (power module)
Phantom Power Requirements     9-52 VDC
Current Consumption     ≤3mA
Weight     60 grams (2.11oz)
Dimensions     Ø19mm (W)* 79mm (H)

The supercardioid e 906 instrument microphone was especially designed for
guitar amplifiers, but it is also an excellent choice for percussion and brass
instruments.

Features
Lively, full sound
Very fast attack
Flat shape of microphone body perfect for guitar amps 
Three adjustable sound characteristics (bright, normal, smooth)
Hum compensating coil
Rugged metal body
Delivery Includes
e 906 microphone
MZQ 100 clamp
Pouch
User manual

Technical Data
Pick-up pattern  supercardioid 
Frequency response  40...18000 Hz 
Sensitivity in free field, no load (1kHz)  2,2 mV/Pa 
Nominal impedance  350 Ohm 
Min. terminating impedance  1000 Ohm 
Dimensions  55 x 34 x 134 mm 
Weight  140 g 

Audio Frequency Response    20 Hz - 10,000 Hz
Case Material    Die cast zinc
Connector Type    3-pin XLR
Element    Dynamic
Finish    Textured Satin Black
Impedance, Low-Z balanced    150 Ω
Mic Type    Instrumental
Open Circuit Voltage    0.63 mV/Pascal
Polar Pattern    Supercardioid
Power Requirement    Passive
Shipping Weight    23.7 oz (672 g)
Wired/Wireless    Wired
Weight Net    12.84 oz (364 g)

Complete With Stereo Bar, Windshield's and Cradle'

The C 414 B-XL II/ST is especially useful for stereo recordings taken from the far field with the inclusion of useful and often valuable room acoustics. The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 300 Hz to 8,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.

Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.

The kit comes complete in an all-metal 'Soundtool' Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens, an H50 stereo bar and an individually-measured chart showing the response curve of the microphone. See www.dv247.com Alternative Products and Related Products on this page for your options.

The C 414B-XLII has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. A classic microphone with a distinctive timbre especially designed for recording of solo vocals and solo instruments.

Whats the difference between the C 414B-XLII and the C 414 B XLS? The main difference between the two current C414 models lies in their frequency responses. The C 414B-XLII has a series of presence rises between 2.5 KHz and 9 KHz. This will make any recording with this microphone brighter or more sibilant than the original sound. This upper mid range boost is quite helpful on vocals and certain instruments such as classical acoustic guitars using nylon or natural strings. The C 414B XLS, see www.dv247.com Alternative Products on this page, has a very flat response that will not color the original sound which is important especially in instrumental recordings. It more suited for general use.

The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid wide cardioid, hyper cardioid and figure-eight patterns. The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds. On the rear of the microphone, an electronic switch allows the selection of -6, -12 and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414B-XLII has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6 dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A.

The C 414B-XLII has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems.

Features:

  • High sensitivity and extremely low self noise
  • Five switchable polar patterns for placement and application flexibility
  • Two-color LEDs provide quick visual indication of selected polar pattern and output overload
  • Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration
  • Supplied with Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens and an H50 stereo bar
  • High sound pressure level capability, 140 - 158dB, and wide dynamic range
  • Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage
  • Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication
  • All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions

Specifications:

  • Type: 1" large diaphragm pressure gradient microphone
  • Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
  • Frequency Range: 20 to 20,000 Hz
  • Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
  • Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
  • Preattenuation Pad: -6, -12,-18 dB, switchable
  • Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
  • Impedance: = 2,200 ohms
  • Supply voltage: 48 V phantom power to DIN/IEC
  • Current consumption: Approximately 4.5 mA
  • Dynamic range: 134 dB minimum
  • Environment Temperature range: -10° C to +60° C (14° F to 140° F)
  • Relative humidity: 95% (+20° C/68° F), 85% (+60° C/140° F)
  • Connector: 3-pin XLR to IEC
  • Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
  • Net weight 300 g (10.6 oz.)

 

LDWS1000MW User User's manual [7,20 MB]
LDWS1000MW Battery disposal informationLDWS1000MW Frequency listLDWS1000MW Frequency lists / Pin assignment Wireless SystemsLDWS1000MW Data sheet - Microphone for Brass/Wind/Percussioninstruments Wind / percussion instrument clip microphone

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

Specifications:
  • Converter Principle: Electret Condenser Microphone
  • Pick-up Pattern: Cardioid pattern
  • Frequency Response: 50 Hz – 18 kHz
  • SPL: 133 dB
  • Sensitivty: -45 dB +/- 3dB
  • Impedance: 250 Ohms +/- 30% @1kHz
  • Connections: Mini XLR – 3 pins
  • Gooseneck: 70 mm
  • Cable length: 1,5 m
  • Surface: Black matt
  • Weight: 56 g
  • Accessories: Wind protection, Phantom power adapter

Type: Black Electret Condenser
Polar Pattern: Uni-Directional
Frequency: 50Hz-16KHz
Sensitivity: -45dB
Output Impedance: 250 Ohm
Mixer Phantom Power: +48V
Ideal for wind & string  musical instruments
Weight0.50 kg0.32 kg0.35 kg2.00 kg0.35 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.32 kg
Weight 0.35 kg
Weight 2.00 kg
Weight 0.35 kg
Weight 1.00 kg