| Content | The G10 is a passive high power line source element – acoustically optimized to reach an excellent sound quality and extraordinary performance. Particular attention was paid to the practical handling to ensure ideal transport characteristics as well as a quick and safe rigging.
Dynamic 3D Sound Image – offers an exact spatial reproduction and depth together with extraordinary sound dynamics. The 3-source waveguide guarantees a coherent wave front in the high frequency range resulting in a smooth and high-resolution sound of the complete array. The acoustically optimized low-mid sound guiding in combination with the 3-source waveguide provides a defined horizontal dispersion over a wide frequency range.
PreSelect – the innovative 3-point rigging system enables to preselect the splay angles between the array elements already in the transport dolly. When flying the array the desired splay angles are achieved automatically.
EASE FOCUS simulation tool – the included software delivers an acoustic simulation of the systems performance in 3D view. The simulation contains all necessary mechanical parameters for the rigging, e.g. pin point of the flying frame as well as the splay angles of all array elements.
| Application |
High power line array element, 2 way passive |
| Components |
2 x 10" neodymium loudspeaker (2.5" voice coil) with acoustic filters, 3 x 1" neodymium compression drivers with 2” voice coil and wave guide |
| Dispersion (h x v) |
90° x 6° (verticaly depending on the array length and konfiguration) |
| Nominal load (AES / program) |
800 / 1600 W |
| Impedance |
8 ohms |
| SPL nom. (Fullspace@1W/1m) / max. SPL (at AES nominal load) |
141 dB |
| Frequency range (-3 dB) |
60 Hz - 20 kHz |
| Dimensions (W x H x D) |
720 x 340 x 500 mm |
| Weight |
43 |
| Connectors |
rear connector panel with 2x Speakon NL 4 |
| Finishing |
PU coating black, humidity resistant |
| Rigging system |
PreSelect – 3-point-rigging system which allows to preselect the curving angle (0°–6°) High-strength steel alloy with anti-corrosion coating |
| Special features |
2 x side handles, 2 x corner handles in the back, info panel |
| Protective grille |
Steel front grille with anti-corrosion coating and acoustic foam |
| Protection class |
IP 45 |
| Simulation software |
EASE Focus 3.0 |
| Flying frame |
TB 1000 for up to 8 elements, TB 2000 for up to 20 elements |
|
The VT4882 is designed to deliver high quality soundreinforcement of sub-low frequencies for live music and a variety of sound reinforcement applications.
| Features : | | Specifications : |
- Advanced Technology Components: Differential Drive® Neodymium Magnet, Dual Voice Coil, Direct Cooled™ cone transducers.
| - Advanced Construction Techniques with PlyMax® provide exceptionally rigid, lightweight enclosure.
| - Rugged DuraFlex™ exterior finish; Weatherized components.
| - Integrated Suspension System, premium aluminum fixtures provide rigid, reliable hanging arrays designed for vertical orientation at various angles.
| | |
| Frequency Range | : | 28 Hz - 120 Hz (-10dB) |
| | Frequency Response | : | 32 Hz - 110 Hz (± 3 dB) |
| | Continuous Power Rating | : | 2000W |
| | Sensitivity | : | 95 dB (1w/1m) |
| | Nominal Impedances | : | 2 x 8 ohms |
| | Dimensions (W x H x D) | : | 1013 mm x 457 mm x 858 mm
(39.9" x 18" x 33.8“) |
| | Weight | : | 53.5 kg (118 lb) | | |
|
The SR-S4LWP is a two-way line array speaker ideal for long distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
| Enclosure | Sealed type | | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | | Sensitivity | 94 dB (1 W, 1 m) | | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | | Crossover Frequency | 3,500 Hz | | Directivity Angle | Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height) | | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm,
conductor cross section: 1.25 m㎡, 4-core cable, 3 m | | Operating Temperature | -10℃ to +50℃ | | Water Protection | IPX4 | | Finish | Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel (SUS304), white, paint | | Dimensions | 160 (W) × 895 (H) × 255 (D) mm (excluding connected cable) | | Weight | 16 kg | | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4WP,
Wall mounting bracket: SR-WB4WP, Wall tilt bracket: SR-TB4WP,
Protection pad: SR-PP4, Digital processor: DP-0206 |
|
The SR-C8LWP is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | | Directivity Angle | Horizontal: 110゜, Vertical: 5゜ | | Speaker Component | Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 5゜ (vertical)
+ compression driver × 2 | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34“),
conductor cross section: 1.25 m㎡ (0.05“)
4-core cable, 3 m (9.84 ft)“ |
Water Protection
| Finish | Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint | | Dimensions | 526.6 (W) × 293 (H) × 296 (D) mm (20.73 × 11.54" × 11.65“)“ | | Weight | 17 kg (37.48 lb) | | Accessory | M8 connection bolt …4 | | Option | Rigging frame: SR-RF8WP
Digital processor: DP-0206 |
|
HX-5W
Variable Dispersion Speaker System.
Four speaker modules ensure high power and high quality.
The changeable orientation of each of the four speaker modules
independently allows the directivity angle of the speaker system
to be adjusted. Built-in passive network ensures appropriate sound
quality. Ideal for both permanent and temporary installations,
including both vertical and horizontal positioning. Equipped
with a convenient carrying handle. Can be mounted directly on
a wall or suspended by wire, chain or shackle with no need
to use optional brackets. Optional mounting brackets allow
use in a wide variety of applications, including suspension,
ceiling mounting, wall mounting, and speaker stand mounting.
Mounting procedures are described in the instruction manuals
enclosed with the mounting bracket or stand adapter.
Specifications:
Enclosure Type Bass Reflex
Power Handling Continuous Pink Noise; 200W: Continuous Program; 600WRated
Impedance 8ohms
Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode),
98 dB (30° mode), 99 dB (15° mode)
Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode)
75 to 20,000 Hz (45° mode) 80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode)
Crossover Frequency 4kHz
Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz),
45° (over 1 .2 kHz), 30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable
Speaker Component Low frequency: 12 cm (5“) cone-type x 4
High frequency: Balanced dome-type x 12
Input Terminal Speakon NL4MP x 2 and M4 screw terminal
Finish (Enclosure) Polypropylene, white
Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches
Weight 16kg
Accesory Hanging bracket x 2, Hex. wrench x 1
Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB,
HY-CW1W,HY-WM1W,HY-WM2W,HY-CN1W, Speaker stand adapter:HY-ST1 |
The HX-5W-WP is a 2-way compact speaker system that permits both constant directivity control over a wide frequency range and changes in directivity. It is ideal for reproducing clear sound in spaces with long reverberation times or high background noises. The HX-5W-WP is designed for outdoor use.
| Enclosure | Sealed type | | Power Handling Capacity | Continuous pink noise: 200 W, Continuous program: 600 W | | Rated Impedance | 8 Ω | | Sensitivity (1 W, 1 m) | 96 dB (60゜ mode), 97 dB (45゜ mode), 98 dB (30゜ mode), 99 dB (15゜ mode) * | | Frequency Response | 95 - 20,000 Hz (-10 dB) (60゜ mode), 100 - 20,000 Hz (-10 dB) (45゜ mode),
105 - 20,000 Hz (-10 dB) (30゜ mode), 110 - 20,000 Hz (-10 dB) (15゜ mode) | | Crossover Frequency | 4 kHz | | Directivity Angle | Horizontal: 100゜ (over 2000 Hz)
Vertical: 60゜ (over 800 Hz), 45゜ (over 1.2 kHz), 30゜ (over 1.6 kHz),
15゜ (over 3.2 kHz) variable | | Speaker Component | Low frequency: 12 cm cone-type × 4, High frequency: Balanced dome-type × 12 | | Speaker Cord | 2-core cabtyre cord with diameter of 6 mm | | Water Protection | IPX4 (Install with the every speaker module downward.) | | Operating Temperature | -15%%dc to +50%%dc | | Finish | Enclosure: Polypropylene, white
Punched net: Surface-treated steel plate, white, rust proof coating | | Dimensions | 408 (W) × 546 (H) × 342 (D) mm | | Weight | 16 kg | | Accessory | Hanging bracket …2, Hex. wrench …1 | | Option | Matching transformer: MT-200
Speaker mounting bracket: HY-PF1WP, HY-CW1WP, HY-WM1WP, HY-WM2WP,
HY-CN1W-WP | * (Factory-preset: 60゜ mode)
|
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Reviews
There are no reviews yet.