| Content | The MCX 15 is a coaxial high performance monitor with low profile casing design. The design enables two set up options – with a flat angle of 35° for a monitoring from near to short distances and a steep angle of 55° for longer distances. With its elegant look it harmoniously fits into all surroundings. Due to the solid construction and the high protective front grid the MCX 15 can deal perfectly with
the hard stage requirements. The dispersion of 60° vertical and 40° horizontal has been adapted to the monitor angle and can be rotated by 90°. Each, left and right side includes a connection panel with each two Neutrik NL 4 Speakon sockets for an efficient cabeling and linking of the stage signals. In multifunctionality the MCX 15 sets new standards with a highstand flange inside the handle and two KME Variofix mounting points where a flying frame can be installed quickly and easy without any tools. The MCX 15 can be combined with the subwoofers QLB 215 and QLB 118 X/G, e.g. as a drum fill or front system.
enclosure design for different positions (speaker stand, monitor, front fill)
- wooden enclosure with weatherresistant polurethane coating
- impregnated speaker membrane for permanent protection against moisture
- coaxialer enclosure design for homogeneous dispersion
- extremely low acoustic feedback behavior
- natural, transparent sound
- pole mount integrated in side handle
- left- and back facing connector panel
- compact dimensions und low weight
| Components |
15“ + 1,4“ (3“ voice coil), coaxial |
| Dispersion (h x v) |
60° x 40° (rotatable) |
| Nominal load (AES / program) |
500 / 1000 W |
| Impedance |
8 ohms |
| SPL nom. (Fullspace@1W/1m) / max. SPL (at AES nominal load) |
98 / 125 dB |
| Frequency range (-6 dB) |
60 Hz - 19 kHz |
| Dimensions (W x H x D) |
600 x 370 x 470 mm |
| Weight |
26 kg |
| Connectors |
4x Speakon NL 4 (2x right, 2x left) |
| Finishing |
PU coating (black) |
| Mounting threads |
2x M8 mounting thread (until 2018: 2x Variofix points M10), 1x M8 safety thread |
| Crossover frequency |
1300 Hz |
| Special features |
2x butterfly handle four sided, pole mount |
| Protective grille |
sturdy front grille with acoustic foam |
| Design |
low profile stage monitor with 3 possible positions (35°, 55°, 90°) |
| Protection class |
IP 44 |
|
StageSource™ is designed to be the worldʼs most versatile loudspeaker system for musicians. Using six powerful DSP-based Smart Speaker modes, the StageSource L3m output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speakerʼs orientation and set the Smart Speaker mode accordingly.
The 1,400-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation.
| Cabin Type: | Wooden, 3-way | | Monitor Use: | Yes | | Amplifier: | 1,400‐watt | | LF/MF, Woofer: | 2x10” | | HF, Horn: | 1” exit compression driver | | DSP Processor: | Yes | | Frequency Response: | 47 Hz to 18 kHz | | Dimensions: | 312 mmx861 mmx 312 mm | | Weight: | 26.1 kg | | Color: | Black |
|
ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability.
Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.
APPLICATIONS
- • Main vocal stage monitor
- • High-output drum or keyboard monitor
- • Sidefill monitor for small- to medium-scale applications
- • Rental companies
- • Professional musicians
General Specs
800 Watt Peak, 400 Wat RMS
129 dB max SPL
45 Hz - 20 kHz frequency response
12" Woofer, 2.5" voice coil
1" Driver, 1.4" voice coil
Acoustical Specs
Frequency Response -3 dB: 45 Hz ÷ 20 Hz
Max SPL: 129 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1“, 1.4" voice coil
Woofer: 12“, 2.5" voice coil
Inputs/Outputs
Input signal: bal/unbal
Input connectors: Jack-XLR male
Output connectors: XLR female
Processor Section
Crossover frequencies: 1400 Hz
Protections: RMS limiter, HF
Limiter: Fast limiter
Amplifier Specifications
Total power: 800 W PEAK
High frequencies:200 W PEAK
Low frequencies: 600 W PEAK
Total power: 400W RMS
High frequencies:100 W RMS
Low frequencies: 300 W RMS
Cabinet Specs
Cabinet Material: Baltic birch
Handles: 1 side
Pole Mount/Cap: Yes
Colour: Black
Size/Weight
Height: 318/12.51 mm/inch
Width: 594/23.38 mm/inch
Depth: 400/15.74 mm/inch
Net Weight: 18/39.68 kg/lbs | Active 300-Watt 2-Way Monitor Speaker System with 12" Woofer, 1" Compression Driver and Feedback Filter
High-power 300-Watt 2-way monitor speaker system for live and playback applications
Exceptional sound quality, wide frequency bandwidth and dynamic range
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Adjustable feedback filter and integrated limiter for ultimate system control and speaker protection
Integrated sound processor for ultimate system control and speaker protection
Ultra-low noise Mic/Line input with Volume control and Clip LED
Dedicated 3-band EQ for perfect sound shaping
Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power
High-resolution 1'' HF driver for exceptional high-frequency reproduction
Proprietary horn design for ultra-wide sound dispersion
Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
Integrated 35 mm pole socket for stand mounting and use as PA system
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
|
LD Systems Stinger MON121AG2 The LD Stinger MON121AG2 is a compact active stage monitor for all mobile applications. The specially developed 12" coaxial speaker with an integral 1" HF driver and powerful ferrite magnets stands out because of a precisely symmetrical dispersion over 75° x 75° and attains a maximum sound-level pressure of 124dB with maximum resistance to feedback. It is driven by a Class AB power amplifier with a power output of 250W RMS. The frequency response curve is 80Hz - 20kHz. ![ldmon121ag2f2_01]( "ldmon121ag2f2_01") Dependable operation of the LD MON121AG2 is ensured by a limiter that prevents overloading of the speaker and a protection circuit that guards against short-circuiting. The input is a XLR-jack combo socket, an XLR output permits looping through of the signal. Other connector panel features include a volume control, IEC power socket, LED indicators of various colours for power, signal, and the limiter function. The elegant looking bass-reflex enclosure of the LD MON121AG2 is made of 15mm-thick multiplex finished with a durable coating. A sturdy metal grille guards against speaker damage, and ergonomically milled handles make transport easier. The monitor angle is 35°. - Type: active
- Woofer size: 12“
- Woofer size: 304 mm
- Woofer type: coaxial speaker
- Woofer magnet: ferrite
- Woofer brand: custom made
- Woofer voice coil: 2
- Woofer voice coil: 50.8 mm
- HF driver size: 1“
- HF driver size: 25.4 mm
- HF driver magnet: ferrite
- HF driver brand: custom made
- HF driver voice coil: 1“
- HF driver voice coil: 25.4 mm
- Amplifier: Class A / B
- Dispersion angle (H x V): 75° x 75°
- Power output (RMS): 250 W
- Power output (peak): 500 W
- Frequency response: 80 Hz - 20 kHz
- Crossover frequency: 2200 Hz
- SPL (1 W/1 m): 100 dB
- Max. SPL (continuous): 116 dB
- Max. SPL (peak): 124 dB
- Protection: limiter, short-circuit
- Controls: Volume, On / Off
- Indicators: Power, Signal, Limit
- Number of line inputs: 1
- Line input connectors: XLR/ 6.3 mm jack (combo)
- Number of line outputs: 1
- Line output connectors: XLR
- Power supply: transformer
- Operating voltage: 230 V AC / 50-60 Hz
- Cabinet material: 15 mm plywood
- Cabinet type: bass reflex
- Monitor angle: 35°
- Width: 440 mm
- Depth: 360 mm
- Height: 514 mm
- Features: Ergonomic insert handles
| The MCX 12 is a high-performance coaxial stage monitor offering various applications. Depending on the application, the design enables three set-up options: 35° angle for monitoring from short distances, 55° for longer distances, and 90° e.g. for front-fill applications at the stage edge. Due to its inconspicuous design, the MCX 12 fits harmoniously and eleganty into all surroundings. The speaker features a broad dispersion of 80°. The highly sturdy monitor convinces with its precise sound reproduction and gives musicians on stage a top-class sound experience. The flange inside the handle provides to possibility to use the MCX 12 as a PA system on a high stand. If required, the MCX 12 combines perfectly with the QLB 215 or QLB 118 X/G subwoofers. The monitor offers three Neutrik NL4 speakon connectors. Two of them are placed on the side of the high stand flange.
enclosure design for different positions (speaker stand, monitor, front fill)
- wooden enclosure with weatherresistant polurethane coating
- impregnated speaker membrane for permanent protection against moisture
- coaxialer enclosure design for homogeneous dispersion
- extremely low acoustic feedback behavior
- natural, transparent sound
- pole mount integrated in side handle
- left- and back facing connector panel
- compact dimensions und low weight
| Components |
12“ + 2“ (3“ voice coil), coaxial |
| Dispersion (h x v) |
80° conical |
| Nominal load (AES / program) |
400 / 800 W |
| Impedance |
8 ohms |
| SPL nom. (Fullspace@1W/1m) / max. SPL (at AES nominal load) |
98 / 124 dB |
| Frequency range (-6 dB) |
65 Hz – 19 kHz |
| Dimensions (W x H x D) |
485 x 345 x 430 mm |
| Weight |
20 kg |
| Connectors |
3x Speakon NL4 (2x right, 1x left) |
| Finishing |
PU coating (black) |
| Mounting threads |
2x M8 mounting thread (until 2018: 2x Variofix points M10), 1x M8 safety thread |
| Special features |
2x butterfly handle four sided, pole mount |
| Protective grille |
sturdy front grille with acoustic foam |
| Design |
low profile stage monitor with 3 possible positions (35°, 55°, 90°) |
| Protection class |
IP 44 |
|
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Reviews
There are no reviews yet.