| Content |
Project Lone Pine
Kali\'s debut LP-8 studio monitors are designed to give you world-class power and accuracy without breaking the bank.
Performance
Transparency. Clarity. Accuracy.
Kali Audio\'s Lone Pine Series studio monitors are designed to allow you to hear every detail that\'s happening in your mix.
This starts with an exceptionally accurate frequency response. Whatever is present on your mix is what you\'ll hear in these monitors. Nothing is boosted or suppressed to cover flaws or try to sound more pleasing.
With the LP-6, you can mix with more confidence, and you can also be assured that your mix will translate as best as possible to whatever systems your audience is using.
100W Class D Power
37 Hz Lower Frequency Response
< 2.5% System THD 94 dB @ 1M
114 dB Max SPL
3-D Imaging Waveguide
Hear three dimensional sound from a stereo pair of speakers.
Dual-Layer Voice Coil
Large diameter voice coil allows for low distortion and high dynamic range.
Low Noise Port Tube
Precisely engineered using airflow simulations for powerful bass without port noise.
The single most important aspect of a studio monitor is its accuracy. A good studio monitor should present the material it’s playing faithfully, allowing you to make critical decisions that you know will translate to all the systems that your work will ultimately be played on.
Rather than make our own claims about the accuracy of our speakers, we had them independently tested by Pro Sound Testing in Greenville, Indiana. You can download their full test data from the links below, and explore the frequency response, dispersion, and distortion characteristics of both the LP-6 and LP-8. Please note that this data requires the "Common Loudspeaker Format Viewer" application to view.
Kali Audio defines a listening distance as the maximum distance at which the speakers can play continuously at 85 dB while maintaining 20 dB dynamic headroom.
This means that anywhere within that listening distance, you can listen for long periods of time at reference volume, and momentary peaks such as bass drops or explosion effects will come through clearly and with minimal distortion. The LP-6 has enough output for most 1-2 person setups, and the LP-8 can handle larger setups easily.
Bass on the LP-Series monitors is delivered by larger magnets and larger voice coils than any comparable speakers on the market. This gives you more accurate bass response that extends lower, so you can dial in exactly the low end sound you need. Bass response is not boosted or overhyped, but you can be sure that you’re hearing the bass that you have on the track.
The integrated Class D Power amp delivers clean, reliable power that’s optimized to this speaker.
Both models use 40W for the 1” soft dome tweeter. The LP-6 uses 40W for the 6.5-Inch woofer, and the LP-8 uses 60W for the 8-Inch woofer.
Boundary EQ Control
A speaker’s given position in a space can drastically change it’s frequency response. A speaker placed against a wall or on a desk will sound very different than a speaker placed on a stand, even in a well-treated space. Hard surfaces like walls, desk tops, and recording consoles can change the low end frequency response of the monitor, and degrade the overall clarity of the sound.
Happily, most of the common positions are fairly predictable and easily corrected.
Kali’s team did our Boundary EQ tuning at The Village Studios in Los Angeles, and came up with boundary compensation EQ settings to help you get the optimum sound for where you need to put your speakers.
Combined with the LF and HF trims, this will ensure that the speakers sound their best no matter what room you’re mixing in, or where the speakers are placed.
Easy Connections
The LP-8 features balanced XLR and TRS inputs, and an unbalanced RCA input.
The RCA input can be set to -10 dBu sensitivity when you’re using consumer devices like a laptop or smartphone’s headphone jack.
3-D Imaging Waveguide
The waveguide on the Lone Pine Series studio monitors ensures that the directivity of the loudspeaker is smooth throughout its frequency response. What’s more: it’s calibrated so that the sound power of the loudspeaker helps you to perceive sound accurately.
In practical terms, what this means is that you’re hearing spatial details in the recording that allow your brain to place elements of the recording in the space around you. This gives the speakers a more natural, lifelike feel that exposes more of the detail of the material that you’re working on. This level of detail makes it easier to make critical decisions, as well as making these monitors pleasurable to mix on and listen to in general.
Low Noise Port Tube
We wanted to put a port on the front of the LP-Series studio monitors so that they could be used in small spaces where they’d be placed against walls. At the same time, we didn’t want noise from the front port to distract from the accuracy of the speaker, so we developed a special front port that doesn’t make noise.
On most port tubes, air leaves at different speeds from different points of the opening, creating noisy turbulence. This turbulence can be heard as "chuffing,” or an audible air sound coming from the monitor. This sound will add to the noise floor and obscure the details of the low end.
The port tube on LP-6 was designed to ensure that all of the air leaves the port tube at the same velocity. This helps add to the low end response of the speaker, while keeping the bass clean, tight, and devoid of extra noise.
| |
|---|
| Powered: |
|
Yes |
| Amp Class: |
|
D |
| Power Config: |
|
Bi-Amped |
| LF Power: |
|
60 W |
| HF Power: |
|
40 W |
| Total Power: |
|
100 W |
| LF Driver: |
|
8" Woofer |
| HF Driver: |
|
1" Soft Dome Tweeter |
| Freq. Response (-10 dB): |
|
37 Hz - 25 kHz |
| Frequency Range (±3 dB): |
|
45 Hz - 21 kHz |
| Crossover: |
|
1.8 kHz |
| Listening Distance: |
|
2.8 Meters |
| Max SPL: |
|
114 dB |
|
MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 40 Hz | ÷ 20 kHz | | Max SPL: | 114 dB | | | Horizontal coverage angle: | 110° | | | Vertical coverage angle: | 70° | | | Compression Driver: | 1" neo, metal dome | | | Woofer: | 6.5" neo, ICC technology | |
| INPUT/OUTPUT SECTION |
|---|
| Input connectors: | combo XLR/Jack | | | Input sensitivity: | -6/+6 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 1900 Hz | | | Protections: | thermal, excurs., rms | | | Limiter: | soft limiter | | | Controls: | bass tilt, roll-off, treeble tilt, desktop, DSP controlled | |
| AMPLIFIER SPECIFICATIONS |
|---|
| High frequencies: | 100 Watts | | | Low frequencies: | 200 Watts | | | Cooling: | convection | | | Connections: | vde | |
| CABINET |
|---|
| Cabinet Material: | die cast aluminum | | | Hardware: | orientation adjustable stand | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 370/14.5 mm/inch | | | Width: | 265/10.4 mm/inch | | | Depth: | 250/9.8 mm/inch | | | Net Weight: | 10.5/23 Kg/Lbs |
|
* Active studio monitors with USB audio interface
* 4.25-inch magnetically shielded, inverted cone, copolymer woofer
* 1-inch silk dome high frequency driver
* 2 x 20 watts of internal stereo power
* Two combination mic and instrument/line inputs
* Two 1/8-inch stereo headphone outputs with level controls
* Includes Cakewalk® Sonar LE music production software
* Mic and instrument/line gain control with clip LED
* 16-bit 44.1kHz/48kHz
* Stereo RCA and 1/8-inch aux inputs
* 2-position switch for no-latency direct stereo and mono monitoring
* Mix control to balance computer and audio sources
* USB and speaker cable included
|
PRICE PER UNIT
The smallest big sound ever... With the A3X, ADAM Audio present their smallest monitor to date, making it perfectly suited for all environments where space is limited but sound shouldnʼt be constricted. The A3X combines a tiny footprint with the much acclaimed ADAM sound quality by using the X-ART tweeter for the higher frequencies, a guarantee for crystal clear music reproduction. A 4.5” (basket) driver handles the lower registers. The diaphragm is made from carbon fiber, a material that is very light but very stiff and therefore capable of delivering colouring-free sound. Two built-in 25 Watt amplifiers powers each of the drivers directly. Stereolink A very handy and exclusive technology found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker. This new technology connects two A3X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakerʼs gain control. This makes the A3X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily. Controls and Connectors The front of the A3X sports dual ports for surprisingly low frequency response down to 60Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting. Review: "Highly recommended“ "Iʼve used various monitors for my computer work before, but never of the caliber of the A3X series. Before these, I would have to redo my mixes significantly when transitioning from the small cheapies to the big 'real ones'. The ADAM Audio A3Xʼs save me a step by providing both great sound in a compact format and by changing mundane audio task-work into a quality listening experience. If you use good monitors from the outset, youʼll learn your music that much faster so that when it comes time for mixdown and mastering on your big boxes, youʼll already be acclimated to your songʼs subtler sonic aspects—aspects revealed only by the A3Xʼs with their sweet, smooth top end, and impressive handling of bass frequencies. Highly recommended.“
(Jon Chappell, Harmony Central, 03/10) Review: "...one of the best compact monitors“ "ADAM´s A3X as the smallest monitor with a X-ART tweeter to date has convinced us in every respect. It´s one of the best compact monitors we have ever reviewed and with its almost shameless low price it´s worth every penny. (Professional Audio, 05/10) | Mid-Woofer |
| | Number | 1 | | Basket Ø | 4.5" (120 mm) | | Voice coil Ø | 1" (25 mm) | | Cone material | Carbon Fiber | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Mid-Woofer | 1 | | Type | A/B | | Amp. power RMS / music | 25 W / 40 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 25 W / 40 W | | Control panel |
| | Input Sensitivity | -∞ to +14 dB | | Tweeter gain | ±4 dB | | Input connectors |
| | Analog | XLR / RCA | | General data |
| | Frequency response | 60 Hz - 50 kHz | | THD 90dB/1m > 100 Hz | ≤0.8 % | | Long term output | ≥98 dB | | Max. peak | ≥106 dB | | Crossover frequencies | 2800 Hz | | Input impedance | 10 KOhm | | Weight | 10.1 lb (4,6 kg) | | Magnetically shielded | No | | Height x Width x Depth | 10" (252 mm) x 6" (150 mm) x 7.5" (185 mm) | | Warranty | 5 Years |
| Delivery contents | | Cinch-cable, Power cord, Manual |
|
Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB
Benefit: Sound true to actual recording
Benefit: Any pair of speakers is a matched pair
Active Technology
2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W
Benefit: Precise dividing slope, correct phase, and low distortion
Benefit: Minimal chance of speaker damage due to overdriving
Servo Loop Woofer Technology
Electronic control and dampening
Benefit: Speaker output is as true to incoming signal as possible
Frequency Response Controls
80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)
Benefit: Excellent response in a variety of acoustic environments
Wide Sweet Spot
Custom-designed die-cast wave guide
Benefit: User hears the same thing across a wider range of motion
3-Position Acoustic Space Switch
Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement
Benefit: As close-to-flat performance as possible regardless of placement in room
Applications
Professional Recording Studios
Home and Project Studios
Film (THX) and Post Production Studios
Home Theater Installations
Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz
| Behringer MS-16 2x8W 2-Way Active Personal Monitor System
The Behringer MS16 Studio Monitors feature an active 2-way design with powerful 4'' woofers and 1.5'' tweeters, powered by two 8 watt amplifiers. Offering two line inputs and a microphone input, the Behringer MS16 monitors are perfect for both home studios and general multimedia applications.
Full Description
Compact and Ideal For Home Studio
The Behringer MS16 Studio Monitors, Pair are the ideal studio monitor for your home studio project. Whether that be mixing, producing, or even listening the MS16 Studio Monitors turn your computer into a personal home studio. Its powerful 4" woofers provide thumping bass, whilst the high resolution tweeters provide clean high frequencies. Also featured are dedicated volume, bass and treble controls for extra flexibility. They also make excellent add-on speakers for electronic keyboards and playing a live performance.
Input Connections
The MS16 Studio Monitors feature multiple input options featuring a 1/8" stereo input for connecting up CD, MD and MP3 players. The dual RCA jacks allow for stereo keyboard modules and tape decks. Furthermore there is a 1/4" inch to allow connections for a dynamic microphone or electric guitar enabling you to sign or play along with prerecorded tracks.
Features
- Compact stereo speaker system ideally suited for home studios, multimedia applications, keyboard and vocal monitoring, etc.
- Powerful 4'' woofers and high-resolution tweeters powered by two 8 watt amplifiers
- Dedicated Volume, Bass and Treble controls for more flexibility
- Stereo RCA inputs for sound cards, keyboards, etc. that can be used simultaneously with a second stereo source (e. g. CD/MD player) through 1/8'' TRS stereo input
- Separately adjustable 1/4'' TRS microphone input mixable with stereo inputs for playback and vocal monitoring applications
- 1/8'' TRS headphone connector with auto-mute loudspeaker function
- Magnetically shielded for placement near computer monitors
- Designed and engineered in Germany
Specifications
- Woofer: 4''
- Tweeter: 1.5''
- Output Power: 2 x 8 Watts
- Frequency Response: 80Hz - 20kHz
- Speaker Impedance: 4?
- Input 1:
- Connector: 1/8'' TRS Stereo
- Input Level: -10dBm, 10k?
- Input 2:
- Connector: RCA Stereo
- Input Level: -10dBm, 10k?
- Mic Input:
- Connector: 1/4'' TRS
- Input Level: -50dBm, 50?
- Dimensions: 9.5'' x 5.5'' x 6'' / 241mm x 140mm x 150mm (H x W x D)
- Weight: 4kg
|
Reviews
There are no reviews yet.