Content | “Sit anywhere" Uni-Q Sound
At the heart of the evolved Q Series is the Uni-Q driver array. KEF\'s signature innovation places the tweeter in the acoustic center of the midrange cone, bringing the acoustic ideal of a single point source closer than ever to realisation. The result is a more detailed, more accurate three-dimensional sound image, which is dispersed more evenly throughout the room than is possible with a conventional speaker. Uni-Q\'s ultra-wide dispersion is further enhanced by KEF\'s \'tangerine\' waveguide over the tweeter dome.
Uni-Q sound taken to the next level
The closed box midrange cabinet design reduces the load on the Uni-Q midrange cone, increasing clarity and detail while delivering cleaner, punchier bass.
With the addition of the Damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass response.
Redesigned Bass Drivers
Low-frequency (LF) drivers now have a larger roll surround, along with a new spider suspension to produce cleaner bass at high volumes. A new cone structure improves midrange clarity, and an enhanced Auxiliary Bass Radiators (ABRs) with a new surround and rear suspension delivers better controlled and more impressive bass.
Redesigned Bass Drivers
Low-frequency (LF) drivers now have a larger roll surround, along with a new spider suspension to produce cleaner bass at high volumes. A new cone structure improves midrange clarity, and an enhanced Auxiliary Bass Radiators (ABRs) with a new surround and rear suspension delivers better controlled and more impressive bass.
Floorstanders
Q950 is the flagship model of the Q Series range, featuring the KEF signature Uni-Q driver array paired with 200mm (8 inch) long-throw bass driver and matching ABRs. With the latest enhancement in acoustics and design, Q950 brings high resolution sound with extraordinary depth and exceptional clarity. Priced as a Pair speaker.
Model |
Q950 |
Design |
Two and a half-way bass reflex |
Drive Units |
200mm (8in.) aluminium Uni-Q
38mm (1.5in.)vented aluminium dome HF
200mm (8in.) aluminium LF
2 x 200mm (8in.)aluminium ABR |
Frequency range free field |
38Hz (-6dB) |
Frequency Response |
44Hz-28kHz (±3dB) |
Crossover Frequencies |
2.2kHz |
Maximum Output |
113dB |
Amplifier requirements |
15-200W |
Sensitivity |
91dB (2.83V/1m) |
Nominal Impedance |
8 Ohms (min.3.2 Ohms) |
Dimensions |
H x W x D:
1062 x 244 x 328 mm
1116 x 357 x 328 mm (with Plinth) |
Weight |
20.6kg (45.4 lbs) |
Unit measurement |
Pair |
|
Dimensions | Metric :46" H x 8-1/2" D x 5-1/2“W | 116.8 x 21.6 x 14.0 cm
Height with Base | Metric :47.5" | 120.7 cm
Base Dimensions | Metric :10-1/2" W x 14" D | 26.7 x 35.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" BDSS midrange drivers; One 5" x 10" long-throw racetrack subwoofer pressure coupled to two 5" x 10" long-throw racetrack radiators.
Frequency Response :16 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :93 dB
Recommended Associated Amplifier Power :20 – 250 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Internal Amplifier Power :300 watt
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
Inputs :One pair of 5 way binding posts; One LFE input (optional)
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Granite
Accessories :Plastic foot tippers; Isolation spikes
Packaging :One to a carton
Weight | Metric :54 lbs | 24.5 kg
Warranty :5 Years; 3 Years for Amplifiers
|
2 x 6 ½ ¨ Polymer/Mica Cone
with Rubber Surround
1 x 1¨Silk Polymer Composite
Dome
Amplifier Power 20-250 W/ch
Impedance 8 Ohms
Sensitivity 90dB
Dimensions 102 x 22 x 40
ALSO AVAILABLE IN CHERRY COLOR
|
System Format: 3 Way Frequency Response: 30 Hz - 60 kHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 116.8 dBA Power Handling (RMS): 200 W Recommended Amplifier Requirements (RMS): 100 - 200 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: L.F - M.F: 790 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment: 2 x 6.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 1060 x 210 x 330 mm (41 3/4 x 8 1/4 x 13 inch) Weight (each) Excluding stands: 27.2 Kg (59.9 lbs) AVAILABLE IN SIX COLOR FINISHES
| Two way, double series reflex
2 x Woofer 130 mm.
Coated paper, double magnet
Tweeter 26 mm.
Soft dome (silky fabric)
Impedance: 8 Ohm (min. 6,5)
RMS POWER: 100 W
MAX POWER: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1030x220mm.
Net weight: 16 Kg.
Finish: leather and cherrywood (or walnut vinyl) |
PRICE PER SPEAKER
Specifications Recommended Usage | Front Speakers | Type | 3-Way Bass Reflex Design | Woofers | Dual 6-1/2" PMD Cone | MidRange Driver | 5" Cone With Waveguide Horn | Tweeters | 1" Aluminum Dome With Waveguide Horn | Magnetic Shielding | Yes | Twin Bass Reflex Ports | Single Port | Gold-Plated Brass Extruded Terminals | Bi-Wiring Terminals | Frequency Response | 30 Hz - 35 kHz | Sensitivity | 88 dB/2.83 V/1 m | Input Power (Maximum / Nominal) | 250W / 100W | Impedance | 6 Ohms | Product Dimensions (W x H x D) | 8-3/4" x 38-9/16" x 13-9/16“ | Product Weight (lbs. each) | 20 Kg
|
---|
|
Reviews
There are no reviews yet.