Content |
“Sit anywhere" Uni-Q Sound
At the heart of the evolved Q Series is the Uni-Q driver array. KEF\'s signature innovation places the tweeter in the acoustic center of the midrange cone, bringing the acoustic ideal of a single point source closer than ever to realisation. The result is a more detailed, more accurate three-dimensional sound image, which is dispersed more evenly throughout the room than is possible with a conventional speaker. Uni-Q\'s ultra-wide dispersion is further enhanced by KEF\'s \'tangerine\' waveguide over the tweeter dome.
Uni-Q sound taken to the next level
The closed box midrange cabinet design reduces the load on the Uni-Q midrange cone, increasing clarity and detail while delivering cleaner, punchier bass.
With the addition of the Damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass response.
Redesigned Bass Drivers
Low-frequency (LF) drivers now have a larger roll surround, along with a new spider suspension to produce cleaner bass at high volumes. A new cone structure improves midrange clarity, and an enhanced Auxiliary Bass Radiators (ABRs) with a new surround and rear suspension delivers better controlled and more impressive bass.
Redesigned Bass Drivers
Low-frequency (LF) drivers now have a larger roll surround, along with a new spider suspension to produce cleaner bass at high volumes. A new cone structure improves midrange clarity, and an enhanced Auxiliary Bass Radiators (ABRs) with a new surround and rear suspension delivers better controlled and more impressive bass.
Floorstanders Q950 is the flagship model of the Q Series range, featuring the KEF signature Uni-Q driver array paired with 200mm (8 inch) long-throw bass driver and matching ABRs. With the latest enhancement in acoustics and design, Q950 brings high resolution sound with extraordinary depth and exceptional clarity. Priced as a Pair speaker.
Model |
Q950 |
Design |
Two and a half-way bass reflex |
Drive Units |
200mm (8in.) aluminium Uni-Q 38mm (1.5in.)vented aluminium dome HF 200mm (8in.) aluminium LF 2 x 200mm (8in.)aluminium ABR |
Frequency range free field |
38Hz (-6dB) |
Frequency Response |
44Hz-28kHz (±3dB) |
Crossover Frequencies |
2.2kHz |
Maximum Output |
113dB |
Amplifier requirements |
15-200W |
Sensitivity |
91dB (2.83V/1m) |
Nominal Impedance |
8 Ohms (min.3.2 Ohms) |
Dimensions |
H x W x D: 1062 x 244 x 328 mm 1116 x 357 x 328 mm (with Plinth) |
Weight |
20.6kg (45.4 lbs) |
Unit measurement |
Pair |
|
Three way, bass-reflex
Sub-woofer 200 mm.
coated paper
Mid-woofer 130 mm. paper
Tweeter 28 mm. soft dome
coated silky fabric
Impedance: 6 Ohm (min. 4)
RMS Power: 120 W
MAX Power: 200 W
Efficiency: 90 dB/W/1 m
Dimensions: 325x385x1130 mm.
Net weight: 26 Kg.
Finish:
cherrywood, metallized mat grey
|
Dimensions | Metric :5-1/4" W x 5-1/8" D x 42" H | 13.3 x 13.0 x 106.7 cm
Height with Base | Metric :42-7/8" | 104.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" high definition midrange drivers; Two 4-1/2" high definition bass drivers; Two 4-1/2" pressure coupled bass radiators
Base Dimensions | Metric :8-3/4” W x 8-5/8” D | 22.2 x 21.9 cm
Accessories :Plastic Foot Tippers; Isolation Spikes
Frequency Response :35 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 225 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Packaging :One to a carton
Weight | Metric :23 lbs | 10.4 kg
Warranty :5 Years
|
Dimensions | Metric :7" W x 11" D x 35" H | 17.8 x 27.9 x 88.9 cm
Driver Complement :Two 1” pure aluminum dome tweeters; Two 5.25” high definition bass/midrange drivers
Frequency Response :25 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 175 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of five way binding posts
Accessories :Feet; Isolation Spikes
Weight | Metric :42 lbs | 19.1 kg
Available Finishes :Piano-Gloss Black
Packaging :One to a carton
Warranty :5 Years |
Dimensions | Metric :4-1/16" W x 4-1/16" D x 39-1/4" H | 10.3 x 10.3 x 99.7 cm
Height with Base | Metric :40-1/8" | 101.9 cm
Accessories :Plastic Foot Tippers; Isolation Spikes
Frequency Response :40 Hz – 30 kHz
Base Dimensions | Metric :8-3/16” W x 8” D | 20.8 x 30.3 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 3-1/2" high definition midrange drivers; Two 3-1/2" high definition bass drivers; Two 3-1/2" pressure coupled bass radiators
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :120 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Packaging :One to a carton
Weight | Metric :23 lbs. | 10.4 kg
Warranty :5 Years
|
Twin Ported HiVe® II technology Sealed Mid-range TLE® 2 x 8" long-throw RDT® bass drivers 1 x 4" RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather Finish options: Santos Rosewood veneer with clear gloss piano lacquer Ebony veneer with clear gloss piano lacquer Piano black gloss Frequency Response: 28 Hz - 100 KHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 118.6 dBA Power Handling (RMS): 300 W Recommended Amplifier Requirements (RMS): 100 - 300 W Bass Alignment: Twin Ported HiVe II Technology Sealed Mid-range TLE Mid / H.F Crossover Frequency: 4000 Hz Bass Low Pass Crossover Frequency: 550 Hz Driver Unit Complement: 2 x 8" long throw RDT bass drivers 1 x 4" RDT mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Including Fixed Plinth & Feet (H x W x D): 1113 x 410 x 470 mm (43 13/16 x 16 1/8 x 18 1/2) Weight (each) including Plinth: 43.8Kg (96.4lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Reviews
There are no reviews yet.