Klark Teknik DI 22P Passive Stereo DI Box

Original price was: €100.00.Current price is: €86.98. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Passive Stereo DI Box with Midas Transformers and Extended Dynamic Range
Passive Stereo DI Box with Midas Transformers and Extended Dynamic Range

 

Read more

Passive Stereo DI Box with Midas Transformers and Extended Dynamic Range
  • Especially suited to multimedia applications
  • Midas transformer
  • Inputs: 2x 6.3 mm jack, 1x 3.5 mm mini-jack (stereo) and 2x RCA
  • Neutrik XLR outputs
  • 15 dB pad switch
  • Ground lift
  • Input impedance: 30 kOhm
  • Output impedance: 600 Ohm
  • Frequency range (±1 dB):: 20 Hz – 30 kHz
  • Signal-to-noise ratio: 105 dBu
  • Sturdy, compact aluminium housing with protective, hard rubber corners
  • Dimensions (W x H x D): 118 x 64 x 112 mm
  • Weight: 0.53 kg
Weight 1 kg

Reviews

There are no reviews yet.

Be the first to review “Klark Teknik DI 22P Passive Stereo DI Box”

Your email address will not be published. Required fields are marked *

Quick Comparison

Klark Teknik DI 22P Passive Stereo DI Box removeARX DI-PLUS 2 STEREO ACTIVE D.I BOX removeBEHRINGER DI100 Ultra DI Box Active Battery/Phantom removeBSS AR-133 ACTIVE DI BOX (Battery/ Phantom Powered) removeOMNITRONIC LH-053 PASSIVE DI BOX removePALMER AUDIO PAN02 TOOLS Active DI-box remove
NameKlark Teknik DI 22P Passive Stereo DI Box removeARX DI-PLUS 2 STEREO ACTIVE D.I BOX removeBEHRINGER DI100 Ultra DI Box Active Battery/Phantom removeBSS AR-133 ACTIVE DI BOX (Battery/ Phantom Powered) removeOMNITRONIC LH-053 PASSIVE DI BOX removePALMER AUDIO PAN02 TOOLS Active DI-box remove
ImageKlark Teknik DI 22P Passive Stereo DI BoxBEHRINGER DI100 Ultra-Rugged DI Box for Stage and Studio Powered active battery phantom10355053 lh 053 di box balance unbalance
SKUDI 22PDI-PLUS 2E005264AR-133LH-053PAN02
Rating
Price Original price was: €100.00.Current price is: €86.98. incl. GR VAT Original price was: €241.80.Current price is: €203.11. incl. GR VAT Original price was: €54.07.Current price is: €46.00. incl. GR VAT Original price was: €178.71.Current price is: €159.00. incl. GR VAT Original price was: €31.71.Current price is: €26.96. incl. GR VAT Original price was: €103.65.Current price is: €68.20. incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock (can be backordered)

Only 5 left in stock (can be backordered)

In stock (can be backordered)

Only 2 left in stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderIn stock (can be backordered)Only 5 left in stock (can be backordered)In stock (can be backordered)Only 2 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Passive Stereo DI Box with Midas Transformers and Extended Dynamic Range
  • Professional and multi-purpose direct injection box for stage and studio applications
  • Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
  • Ultra-flat frequency response due to renowned BEHRINGER OT-1 transformer
  • Internal battery automatically shuts off when phantom power is applied
  • Allows direct connection to speaker outputs with up to 3,000 Watts
  • 1 high-impedance signal input, 6.3 mm jack
  • 1 low-impedance XLR output
  • 6.35 mm jack input, and output
  • Converts an unbalanced line input (e.g. instruments) into a balanced XLR output for connecting a mixer
  • Switchable input attenuation: 0 dB, -20 dB, -40 dB
  • Rugged black metal housing
Content
Passive Stereo DI Box with Midas Transformers and Extended Dynamic Range
  • Especially suited to multimedia applications
  • Midas transformer
  • Inputs: 2x 6.3 mm jack, 1x 3.5 mm mini-jack (stereo) and 2x RCA
  • Neutrik XLR outputs
  • 15 dB pad switch
  • Ground lift
  • Input impedance: 30 kOhm
  • Output impedance: 600 Ohm
  • Frequency range (±1 dB):: 20 Hz - 30 kHz
  • Signal-to-noise ratio: 105 dBu
  • Sturdy, compact aluminium housing with protective, hard rubber corners
  • Dimensions (W x H x D): 118 x 64 x 112 mm
  • Weight: 0.53 kg

Phantom or battery powered in a rugged steel chassis
 
The ARX DI-PLUS 2 represents another major step forward in active direct boxes. Packaged in
a single channel stand-alone format, the DI-PLUS 2 represents a fresh look at active stereo
D.I. concepts.

Precision engineered
Ultra quiet, ultra clean circuitry delivers maximum headroom whatever the signal. Premium grade
components, plus an all-steel chassis gives excellent hum and noise specifications and superb
audio quality in a tough, roadworthy package. Accurate Left and Right channel level matching keeps
the stereo image centred.

Level control
The DI-PLUS 2 features two high impedance unbalanced inputs on the front panel, running to balanced
XLR outputs on the rear. A a global Pad switch drops inputs by 20dB, making it suitable for all applications
from the softest keyboard to the hottest broadcast levels.
 
Battery compartment
The revolutionary simple 'clamshell' action of the DI-PLUS 2 battery compartment makes battery changing
extremely easy, even on the darkest stages.
A 9v alkaline battery snaps into a PCB mounted battery holder for fast, secure location. No fragile battery clip
leads to break, no tools required, no screws to lose. Production crew heaven!
 
Automatic Phantom switching
The DI-PLUS 2 will automatically switch itself to the console's own Phantom Power, if available, and an LED
will indicate this mode. Turn the Phantom Power off and it will instantly revert back to battery mode.

Rugged all-steel case
A lot of direct boxes are fitted into brittle cast alloy cases. Not this one! The tough all-steel inner and outer
chassis of the DI-PLUS 2 provide excellent RF/EMF shielding while making it a sturdy, heavy duty unit that
is hard to dislodge, and hard to leave behind.
 
Rear panel showing Left and Right XLR connectors, ground lift switch, battery check switch and LED, plus
phantom power On LED and captive screw for opening up the unit for battery changing
 
Whether you're a Studio or Live Sound engineer, installation contractor, or broadcast engineer, you want all
the dynamics,clarity and stereo information of the original sound source transferred to the mixing console.
The ARX DI-PLUS 2 provides a rugged, no-compromise solution to all stereo direct injection and signal
balancing requirements.
 
T E C H N I C A L S P E C I F I C A T I O N S:
Max Input Level
+12 dB Phantom powered
+6 dB Battery powered
Input Impedance 1 Meg Ohm
Max Output Level
+17 dB 10K Ohm load Phantom powered
+12 dB 10K Ohm load Battery powered
+11 dB 600 Ohm load Phantom powered
+12 dB 600 Ohm load Battery powered
Output Impedance 680 Ohms Balanced
Output Signal to Noise
-100 dB unweighted
-104 dB A weighted
Dynamic Range
117 dB 10K Ohm load Phantom powered
112 dB 10K Ohm load Battery powered
111 dB 600 Ohm load Phantom powered
107.5 dB 600 Ohm load Battery powered
Distortion 100 Hz .0018%, 1KHz .0028%, 10KHz .0056%
Frequency Response 20Hz to 20KHz, ± 0.2 dB
Gain through Unit: 6dB (Pad switch out)
Pad Switch: Global -20 dB attenuation
Input and Loop Out Connectors
Insulated jacks (!!!Note that Channel A Input connector switches the unit on
when a plug is inserted. Remove plug when storing to avoid battery drain!!!)
Output Connectors
3 pin XLR. Wired Pin 1 Ground, Pin 2 + Hot, Pin 3 - Cold.
Global Audio Ground (Pin 1) lift switch
Construction
All-steel chassis, fibreglass PCB
Battery Access
Twist connector opens chassis, snap-in battery holder inside.
No tools required

Product Features: Professional and multi-purpose direct injection box for stage and studio applications Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers Ultra-flat frequency response due to renowned BEHRINGER OT-1 transformer Internal battery automatically shuts off when phantom power is applied Allows direct connection to speaker outputs with up to 3,000 Watts Switchable input attenuation allows input levels of up to +50 dB Ground Lift switch eliminates typical ground loop problems ¼" TRS and gold-plated XLR connectors Ultra-rugged, road-suitable aluminum case Stackable oversized rubber corners High-quality components and exceptionally rugged construction ensure long life and durability Conceived and designed by BEHRINGER Germany   With the DI100, you can rest assured that your sound source will reach the console balanced and noise-free. BEHRINGER's take on the all-important active DI box gives you functionality, durability and incredible sound at a remarkable price.
Be Direct
Plug into the DI100's balanced 1/4" TRS or XLR input, then send a signal to your console via the balanced XLR output. You can even plug your guitar or bass amp's speaker output into the DI100, which can handle ratings of up to 3,000 Watts and still deliver a perfect signal. It also features a 1/4" LINK jack to send your signal to an on-stage amplifier. The DI100 also has a switchable attenuation pad, allowing input levels of up to +50 dB. There is also a ground lift switch to eliminate noise associated with ground loops. The DI100 also features BEHRINGER's renowned OT-1 output transformer.
Superior Sound, Incredible Value
DI boxes are an essential part of any stage or studio, and the DI100 delivers the exceptional sound you expect, wrapped up in a rugged, road-proof aluminum case with stackable rubber corners.
With added functionality and enhanced audio performance, the AR-133 has been designed to be more affordable for musicians, studios and PA companies. The unit includes phantom power and battery supplies as standard. Should the phantom power from the console fail or be accidentally switched off, the AR-133 automatically switches over to the internal 9V battery providing uninterrupted use. The unit is housed in a rugged aluminium extrusion case, with robust polyurethane end-cheeks which give the AR-133 a very distinctive look. Input connectors are both 1/4" jack sockets and an XLR socket, the latter meaning that the AR-133 can be used to convert unbalanced signals to a balanced output on XLRs throughout. The arched case allows cables to run back underneath the unit from the end for neat cable management. Input attenuation is 0, -20 or -40dB, making the box suitable for instrument, line or amplifier levels on inputs. On the output side, a ground-lift switch is provided for quick solutions to ground-loop problems. The AR-133 uses an enhanced version of the same audio path as the AR-116, now regarded by many people as a reference standard. The sound quality is legendary, particularly on acoustic and bass guitars. Numerous applications can be satisfied by the AR-133. For example, as well as the traditional guitar use, the AR-133 can be used with keyboards, DJ consoles, amplifier outputs, and other electronic sources.An additional bonus is the ability to use the AR-133 as an active balancing device. Input Section Input Impedance  1M Ohm (pad at 0dB) 47k Ohm (pad at -20dB) 47k Ohm (pad at -40dB) Max Input Level +9dBu (pad at 0dB) +29dBu (pad at -20dB) +49dBu (pad at -40dB) Connectors  Two Parallel 1/4" jack connectors and a parallel XLR connector (unbalanced) Jack:  Tip Hot (+ve) Sleeve Ground XLR: Pin 2 Hot (+ve) Pin 1 & 3 Ground Output Section Output Transformer Balanced Max. Output Level  +8dBu into 600 Ohms or greater Connector  XLR3-32 or equivalent System Performance Distortion (THD)  < 0.005% at 1khz, 0dbu output Noise  < -105db unweighted, 22hz-22khz, rms* Frequency Response 30Hz to 20kHz, +0dB/-1dB General Main/Standby battery 9 volt PP3 type, preferably alkaline. Current drain  on phantom - less than 7.5mA on battery - less than 2mA. Phantom Power  +20 volts DC to +48 volts DC Weight 650 gms, excluding batteries. Overall Dimensions  59 mm x 124 mm x 143 mm (2.3" x 4.9" x 5.6“)Little brother of the LH-055 DI Box. Sturdy housing, solid workmanship at an unbeatable price. 1-channel DI box, passive Converts unbalanced 6.3 mm jack line input (e.g. from instruments) into balanced XLR output for connecting a mixer Switchable input attenuation: 0 dB, -20 dB, -40 dB Ground-lift switch eliminates ground loop problems 1 signal input (6.3 mm jack) 1 parallel output (6.3 mm jack), feed-through of the input signal (e.g. to a guitar amplifier) 1 low-impedance output (XLR) Black housing

Passive 1-channel DI box, black

  • 1 high-impedance signal input, 6.3 mm jack
  • 1 low-impedance XLR output
  • 6.35 mm jack input, and output
  • Converts an unbalanced line input (e.g. instruments) into a balanced XLR output for connecting a mixer
  • Switchable input attenuation: 0 dB, -20 dB, -40 dB
  • Rugged black metal housing

Package contents

  • 1 x device, 1 x user manual
Frequency range: 15 - 30000 Hz
S/N ratio: >95 dB
Impedance: Input: 50 kOhm Output: 600 Ohm
Input attenuation: 0 dB, -20 dB, -40 dB; switchable
Control elements: Groundlift selector
Connections: Input: 1 x 6.3 mm plug (unbal.) Link: 1 x 6.3 mm plug (unbal.) Output: line via 1 x 3-pin XLR
Dimensions: Width: 12,7 cm Depth: 7,4 cm Height: 4,5 cm
Weight: 440 g
 
Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm.
Weight1 kg0.60 kg0.65 kg0.65 kg0.70 kg0.31 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1 kg
Weight 0.60 kg
Weight 0.65 kg
Weight 0.65 kg
Weight 0.70 kg
Weight 0.31 kg