KRAMER FC-10 Composite & s-Video Transcoder

NPUT:    1 composite video 1Vpp/75Ω on a BNC connector;1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3Vpp/75Ω on a 4-pin connector.
OUTPUTS:    1 composite video 1Vpp/75Ω on a BNC connector; 1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector.
MAX. VIDEO OUTPUT:    2.5Vpp/75Ω.
VIDEO BANDWIDTH (-3dB):    10MHz (YC to CV).
DIFF. PHASE:    0.3Deg.
DIFF. GAIN:    0.36%.
K-FACTOR:    0.05% (YC to CV).
LUMA S/N RATIO:    79dB.
POWER SOURCE:    12V DC, 110mA.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT:    0.6kg (1.3lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19” rack adapter.

COMPOSITE & AUDIO COMBINER ON SINGLE COAX The VA-11 is a high performance combiner of composite video and unbalanced stereo audio signals. It combines the composite video and stereo audio into a single signal which allows the use of a single coax cable, which can then separates it back into composite video and stereo audio when used with the VA-12 separator.

    * Bandwidth - 7MHz (- 3dB).
    * Inputs - 1 composite video and 1 unbalanced stereo audio.
    * Outputs - 1 single signal of the combined audio and composite video.
    * Desktop Size - Compact size. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-50RN.

INPUTS:1 composite video, 1Vpp/75? on a BNC type connector.1 stereo audio, 1Vpp/10k? on RCA connectors.OUTPUT:1 mixed signal 1Vpp/75? on a BNC connector.BANDWIDTH (-3dB):7 MHz.DIFF. GAIN:0.4 %.DIFF. PHASE:0.17 Deg.VIDEO S/N RATIO:72 dB.POWER SOURCE:230 VAC, 50/60 Hz (115VAC, U.S.A.) 4.1 VA.DIMENSIONS:16.5cm x 12cm x 4.5cm (6.5' x 4.7' x 1.8', W, D, H.).WEIGHT:0.78 kg. (1.7 lbs.) approx.ACCESSORIES:Power cord.OPTIONS:RK-50RN 19' rack adapter.

INPUTS:    4 video, 1Vpp/75Ω on RCA connectors.
OUTPUT:    1 composite or single component video, 1Vpp/75Ω on an RCA connector.
BANDWIDTH (-3dB):    400MHz.
SWITCHING SYSTEM:    Mechanical, break-before-make.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.28kg (0.62lbs) approx.
ACCESSORIES:    Mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

INPUTS:     1 composite video, 1Vpp/75Ω, on a BNC connector. 1 audio, 1mV-2V/33k. on an RCA connector      
OUTPUT:     1 balanced, 150Ω on a 6/4 standard telephone socket.      
BANDWIDTH (PAIR):     Video: 58MHz; Audio: 30kHz at 30 meters without lightening arrestors      
NON-LINEARITY (PAIR):     Less 0.2% at short distances      
DIFF. GAIN (PAIR):     0.41%.      
DIFF. PHASE (PAIR):     0.3 Deg.      
K-FACTOR (@ 20m, PAIR):     0.1%.      
S/N RATIO (PAIR):     72 dB.      
CONTROLS:     Video Gain: -1.8 /+ 2.3dB, EQ above 2.5 MHz 0 / 16dB, Audio: 0 / 52dB. 707: Condenser Mic Power. 708: loop termination, signal invert.      
POWER SOURCE:     12 VDC 40mA.      
DIMENSIONS:     12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)      
WEIGHT:     0.28 kg. (0.62 lbs.) approx.      
ACCESSORIES:     Power supply, mounting bracket.      
OPTIONS:     Model VA-50P power supply with six 12VDC outlets. RK-T1, RK-T3, 19” rack adapters

INPUT: 4-pinterminalblock. OUTPUTS:s-Video,1-Vpp/75ohm; (Y), 0.3Vpp/75ohm;(c)ona4pconnector. VIDEO BAND WIDTH (-3dB):8.4MHz,(Y)at100m.GAIN RANGE:-2.4to+6.5dB(Y),-2.7to15.6dB,(EQ.),-5.8to+7.8dB(C). NON-LINEARITY: 0.07%.DIFF.GAIN:0.04%.VIDEO S/NRATIO: Better than 60dB. POWER SOURCE: 12VDC40mA. DIMENSIONS:12cmx7.5cmx2.5cm(4.7”x2.95”x0.98”,W,D,H.). WEIGHT: 0.26kg.(0.58lbs.)Approx. ACCESSORIES: Power supply, mounting bracket.  OPTIONS: ModelVA-50Ppower supply with six12VDCoutlets.RK-T1,RK-T3,19”rack adapters

INPUTS:    8 SMPTE 259M serial video, 75Ω, on BNC connectors; looping analog sync inputs on BNC connectors.
OUTPUTS:    8 reclocked SMPTE 259M outputs, 75Ω, on BNC connectors.
RESOLUTION:    10-bit or 8-bit, automatic according to input resolution.
SWITCHING:    During vertical interval from analog sync.
STANDARDS:    4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
EQUALIZATION:    Automatic for up to 300m for 270Mbps using Belden 8281 cable.
CONTROLS:    22 front panel buttons, RS-232 and RS-485 control interface.
DISPLAY:    Current switcher status on eight 7-segment LEDs. Signal presence for each channel on front panel LEDs.
POWER SOURCE:    Universal, 85-264V AC, 47-440Hz, 25VA max.
DIMENSIONS:    19" x 7" x 1U W, D, H, rack mountable.
WEIGHT:    3.5kg (7.8lbs) approx.
ACCESSORIES:    Power cord.