KRAMER PT-101R 1:1 RF Line Amplifier

INPUT:    1 RF/75Ω, on an "F” type connector.
OUTPUT:    1 RF/75Ω, on an "F” type connector.
BANDWIDTH (-3dB):    40-3000MHz.
COUPLING:    AC.
RF GAIN:    + 20dB typical across band.
NOISE FIGURE:    3.5dB.
POWER SOURCE:    12V DC, 78.8mA.
DIMENSIONS:    6cm x 6.5cm x 2.5cm (2.36” x 2.56” 1”) W, D, H.
WEIGHT:    0.1kg (0.22 lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-4PT 19" rack adapter.

INPUT:    4 video, 1Vpp/75Ω on BNC connectors.
OUTPUT:    1 composite or single component video, 1Vpp/75Ω on a BNC connector.
BANDWIDTH (-3dB):    400MHz.
SWITCHING SYSTEM:    Mechanical, break-before-make.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.28kg (0.62lbs) approx.
ACCESSORIES:    Mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

INPUT: 4-pinterminalblock. OUTPUTS:s-Video,1-Vpp/75ohm; (Y), 0.3Vpp/75ohm;(c)ona4pconnector. VIDEO BAND WIDTH (-3dB):8.4MHz,(Y)at100m.GAIN RANGE:-2.4to+6.5dB(Y),-2.7to15.6dB,(EQ.),-5.8to+7.8dB(C). NON-LINEARITY: 0.07%.DIFF.GAIN:0.04%.VIDEO S/NRATIO: Better than 60dB. POWER SOURCE: 12VDC40mA. DIMENSIONS:12cmx7.5cmx2.5cm(4.7”x2.95”x0.98”,W,D,H.). WEIGHT: 0.26kg.(0.58lbs.)Approx. ACCESSORIES: Power supply, mounting bracket.  OPTIONS: ModelVA-50Ppower supply with six12VDCoutlets.RK-T1,RK-T3,19”rack adapters

INPUT:    1 Y/C, Y=1Vpp/75Ω, C=0.3Vpp/75Ω on a 4-pin connector.
OUTPUT:    3 Y/C, Y=1Vpp/75Ωs, C=0.3Vpp/75Ω, on 4-pin connectors.
BANDWIDTH (-3dB):    420MHz (Y).
MAX. OUTPUT LEVEL:    2.6Vpp/75Ω (Y).
DIFF. GAIN:    0.05%.
DIFF. PHASE:    0.03Deg.
K-FACTOR:   

INPUT:    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUT:    2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors.
MAX. VIDEO OUTPUT:    2Vpp.
VIDEO BANDWIDTH (-3dB):    150MHz (Y).
DIFF. GAIN:    0.03%.
DIFF. PHASE:    0.03Deg.
K-FACTOR:   

Input    SMPTE 259M serial video, 75Ohm on BNC connectors.
Serial Outputs    8 reclocked SMPTE 259M outputs, 75Ohm on BNC connectors, adjustable amplitude.
Parallel Output    ECL level outputs on a 25-pin D-sub (F) connector.
Video Resolution    10-bit or 8-bit, automatic according to input resolution.
Standards    4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
Equalization    Automatic for up to >30dB cable loss.
Power Source    100-240V AC, 50/60Hz, 14VA.
Dimensions     19" x 7" x 1U W, D, H, rack mountable.
Weight     2.5kg (5.5lbs) approx.
Accessories    Power cord.