KRAMER PT-102VN 1:2 Composite Video Distribution Amplifier

1:2 COMPOSITE DA The Kramer PT102VN is a Composite or SDI video distribution amplifier. It will take one input, provide correct buffering and isolation and distribute the signal to two identical outputs.

    * High Bandwidth - 430MHz (- 3dB).
    * Level (Gain) and EQ (Peaking) Controls.
    * Ultra-compact - Part of the Kramer PicoTOOLS™ family of extremely compact, high quality and cost effective solutions.

INPUT:1 video, 1Vpp/75? on a BNC connector.OUTPUTS:2 video, 1Vpp/75? on BNC connectors.MAX. VIDEO OUTPUT:2 Vpp.VIDEO BANDWIDTH (-3dB):430MHz.DIFF. GAIN:0.05%.DIFF. PHASE:0.05 Deg.K-FACTOR:0.05%.S/N RATIO:76.1 dB.CONTROL:Gain: -1.2 to +6 dB, EQ.: 0 to +7.5dB @ 50MHz., via trimmers accessible from the front panel.COUPLING:AC.POWER SOURCE:12 VDC, 30 mA.DIMENSIONS:6cm x 6.5cm x 2.5cm (2.36' x 2.56' x 1', W, D, H.).WEIGHT:0.14 kg. (0.31 lbs.) approx.ACCESSORIES:Power supply.OPTIONS:Model VA-50P power supply with six 12VDC outlets.

Input     Twisted Pair Signal, balanced @ 150 ohms, RJ-11 Standard Telephone Connector
Output     Composite Video, 1 Vpp @ 75 ohms, on a BNC connector
Unbalanced Audio, 1 Vpp @ 33K ohms, mic or line level, on an RCA connector
Video Bandwidth     58 MHz
Video Signal-to-Noise Ratio     72 dB
Differential Phase     0.03°
Differential Gain     0.41%
Video Controls     Power On/Off
Internal Gain and HF
Mic or Line Level
Dimensions (WxDxH)     4.7 x 2.95 x 0.98“
12 x 7.5 x 2.5cm
Weight     0.62 lbs
0.28 kg
Power Source     12 VDC on an AC Power Adapter

INPUT:    1 RF, 0.5Vpp/75Ω (max.) on an "F” type connector.
OUTPUTS:    4 RF, 0.5Vpp/75Ω (max.) on "F” type connectors.
BANDWIDTH:    40MHz to 3000MHz (+/-3dB).
COUPLING:    AC.
RF GAIN:    +6dB typical across band.
NOISE FIGURE:    3.5dB.
POWER SOURCE:    12V DC, 80mA.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.32kg (0.71lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

INPUT:    1 composite video 1Vpp/75Ω on a BNC connector. 1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3 Vpp/75Ω on a 4-pin connector.
Outputs:    1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector; 1 composite video 1 Vpp/75Ω on a BNC connector.
VIDEO BANDWIDTH (-3dB):    100 MHz. (YC to CV), 5.8 MHz. (CV to YC, PAL).
DIFF GAIN:    0.7% (YC to CV,NTSC).
DIFF. PHASE:    0.15 Deg. (YC to CV, NTSC).
K-FACTOR:    0.05% (YC to CV), 0.5% (CV to YC, NTSC).
LUMA S/N RATIO:    72 dB in both direction, (PAL).
CONTROL:    Two electronic touch switches to select PAL or NTSC operation.
POWER SOURCE:    12V DC, 200mA.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT:    0.64kg (1.4lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19” rack adapter.

NPUT:    1 composite video 1Vpp/75Ω on a BNC connector;1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3Vpp/75Ω on a 4-pin connector.
OUTPUTS:    1 composite video 1Vpp/75Ω on a BNC connector; 1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector.
MAX. VIDEO OUTPUT:    2.5Vpp/75Ω.
VIDEO BANDWIDTH (-3dB):    10MHz (YC to CV).
DIFF. PHASE:    0.3Deg.
DIFF. GAIN:    0.36%.
K-FACTOR:    0.05% (YC to CV).
LUMA S/N RATIO:    79dB.
POWER SOURCE:    12V DC, 110mA.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT:    0.6kg (1.3lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19” rack adapter.

Input    1 SMPTE-259M serial video, 75 Ohm on a BNC connector.
Outputs    4 reclocked SMPTE-259M serial video, 75 Ohm on BNC connectors.
Resolution     8 or 10-bits, automatic.
Operation Standards    143Mbps (4fsc NTSC),177Mbps (4fsc PAL) 270Mbps (4:2:2 component),.360Mbps (4:2:2 Widescreen).
Equalization And Reclocking    Automatic up to 30dB of cable loss.
Display    Power ON LED.
Dimensions (w,d,h)    12 x 7.5 x 2.5 (cm) 4.7” x 2.95” x 0.98” (W, D, H.).
Weight     0.3kg. (0.67 lbs.) approx.
Power Source    12VDC, 250 mA.
Options    RK-T1, RK-T3 rack adapters.