KRAMER SD-7108 1:8 SDI Distribution Amplifier

Input    SMPTE 259M serial video, 75Ohm on BNC connectors.
Serial Outputs    8 reclocked SMPTE 259M outputs, 75Ohm on BNC connectors, adjustable amplitude.
Parallel Output    ECL level outputs on a 25-pin D-sub (F) connector.
Video Resolution    10-bit or 8-bit, automatic according to input resolution.
Standards    4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
Equalization    Automatic for up to >30dB cable loss.
Power Source    100-240V AC, 50/60Hz, 14VA.
Dimensions     19" x 7" x 1U W, D, H, rack mountable.
Weight     2.5kg (5.5lbs) approx.
Accessories    Power cord.

INPUTS:     1 composite video, 1Vpp/75Ω, on a BNC connector. 1 audio, 1mV-2V/33k. on an RCA connector      
OUTPUT:     1 balanced, 150Ω on a 6/4 standard telephone socket.      
BANDWIDTH (PAIR):     Video: 58MHz; Audio: 30kHz at 30 meters without lightening arrestors      
NON-LINEARITY (PAIR):     Less 0.2% at short distances      
DIFF. GAIN (PAIR):     0.41%.      
DIFF. PHASE (PAIR):     0.3 Deg.      
K-FACTOR (@ 20m, PAIR):     0.1%.      
S/N RATIO (PAIR):     72 dB.      
CONTROLS:     Video Gain: -1.8 /+ 2.3dB, EQ above 2.5 MHz 0 / 16dB, Audio: 0 / 52dB. 707: Condenser Mic Power. 708: loop termination, signal invert.      
POWER SOURCE:     12 VDC 40mA.      
DIMENSIONS:     12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)      
WEIGHT:     0.28 kg. (0.62 lbs.) approx.      
ACCESSORIES:     Power supply, mounting bracket.      
OPTIONS:     Model VA-50P power supply with six 12VDC outlets. RK-T1, RK-T3, 19” rack adapters

Input    1 mixed video-audio signal 1Vpp/75? on a BNC type connector.
Outputs    1 composite video, 1Vpp/75? on a BNC type connector.1 audio stereo (L, R), 1Vpp/100? on RCA connectors.
Bandwidth (-3Db)    7 MHz.
Diff. Gain    0.4 %.
Diff. Phase    0.17 Deg.
Video S/N Ratio    72 dB.
Power Source    230 VAC, 50/60 Hz (115VAC, U.S.A.) 4.4 VA.
Dimensions     16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”, W, D, H.).
Weight     0.78 kg. (1.7 lbs.) approx.
Accessories    Power cord.
Options    RK-50RN rack adapter holds two units in two vertical rack spaces.

INPUTS:    4 video, 1Vpp/75Ω on RCA connectors.
OUTPUT:    1 composite or single component video, 1Vpp/75Ω on an RCA connector.
BANDWIDTH (-3dB):    400MHz.
SWITCHING SYSTEM:    Mechanical, break-before-make.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.28kg (0.62lbs) approx.
ACCESSORIES:    Mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

INPUTS:    1 composite video, 1Vpp/75Ω on an RCA connector;1 unbalanced stereo audio, 1Vpp/33kΩ on 3.5-mm mini jack.
OUTPUTS:    3 composite video, 1Vpp/75Ω on RCA connectors; 3 unbalanced stereo audio, 1Vpp/150Ω on 3.5mm mini jacks.
MAX. VIDEO OUTPUT:    2Vpp.
VIDEO BANDWIDTH (-3dB):    320MHz.
AUDIO BANDWIDTH (-3dB):    20kHz.
DIFF. GAIN:    0.1%.
DIFF. PHASE:    0.16Deg.
K-FACTOR:    

Input     Twisted Pair Signal, balanced @ 150 ohms, RJ-11 Standard Telephone Connector
Output     Composite Video, 1 Vpp @ 75 ohms, on a BNC connector
Unbalanced Audio, 1 Vpp @ 33K ohms, mic or line level, on an RCA connector
Video Bandwidth     58 MHz
Video Signal-to-Noise Ratio     72 dB
Differential Phase     0.03°
Differential Gain     0.41%
Video Controls     Power On/Off
Internal Gain and HF
Mic or Line Level
Dimensions (WxDxH)     4.7 x 2.95 x 0.98“
12 x 7.5 x 2.5cm
Weight     0.62 lbs
0.28 kg
Power Source     12 VDC on an AC Power Adapter