L-ACOUSTICS LA4X Amplified controller with pfc 4 x 1000 w /8 ohms, ethernet network

No longer available!

Call for Price

CompareAdd to wishlist Submit Better Price

Digital amplifier 4 x 1000W@4Ω class D, with switching power supply with Power Factor Correction (PFC). Includes 32-bit Dual SHARC digital processor with 96 kHz sampling with 4×4 routing matrix. At each output it provides EQ station with 8 IIR, 4 FIR linear phase EQ filters and delay from 0 to 1000 ms. It has 4 channels of AVB inputs from 1 stream, 4 channels of AES/EBU (2 x AES3) with SRC, or 4 channels of analog inputs. Speaker outputs with 4 × 4-point speakON® . Controllable via software (LA Network Manager). Weight 11,35 kg.

Digital amplifier 4 x 1000W@4Ω class D, with switching power supply with Power Factor Correction (PFC). Includes 32-bit Dual SHARC digital processor with 96 kHz sampling with 4×4 routing matrix. At each output it provides EQ station with 8 IIR, 4 FIR linear phase EQ filters and delay from 0 to 1000 ms. It has 4 channels of AVB inputs from 1 stream, 4 channels of AES/EBU (2 x AES3) with SRC, or 4 channels of analog inputs. Speaker outputs with 4 × 4-point speakON® . Controllable via software (LA Network Manager). Weight 11,35 kg.

 

Read more

Digital amplifier 4 x 1000W@4Ω class D, with switching power supply with Power Factor Correction (PFC). Includes 32-bit Dual SHARC digital processor with 96 kHz sampling with 4×4 routing matrix. At each output it provides EQ station with 8 IIR, 4 FIR linear phase EQ filters and delay from 0 to 1000 ms. It has 4 channels of AVB inputs from 1 stream, 4 channels of AES/EBU (2 x AES3) with SRC, or 4 channels of analog inputs. Speaker outputs with 4 × 4-point speakON® . Controllable via software (LA Network Manager). Weight 11,35 kg.
Architecture 4 x 4
Output Power 4 x 1000 W at 4 and 8 ohms
Power supply Universal SMPS with PFC
Inputs AVB, AES/EBU, Analog
Height 2U
Network Milan-certified

Reviews

There are no reviews yet.

Be the first to review “L-ACOUSTICS LA4X Amplified controller with pfc 4 x 1000 w /8 ohms, ethernet network”

Your email address will not be published. Required fields are marked *

Quick Comparison

L-ACOUSTICS LA4X Amplified controller with pfc 4 x 1000 w /8 ohms, ethernet network removeLD Systems LDDP4950 DEEP² Power Amplifier 4 x 810W 4 Ohm removeRAM AUDIO T-2408 Power Amplifier 8x300 Watts removeCROWN CT-4150 POWER POWER AMPLIFIER 4Χ150W/8OHM removeLABGRUPPEN fP 2400Q DIGITAL S.M.P.S 4X380W removeELECTRO VOICE CPS4.10 4-channel Class-D amplifier slot f. optional RCM810 remote module 4 x 1000 W remove
NameL-ACOUSTICS LA4X Amplified controller with pfc 4 x 1000 w /8 ohms, ethernet network removeLD Systems LDDP4950 DEEP² Power Amplifier 4 x 810W 4 Ohm removeRAM AUDIO T-2408 Power Amplifier 8x300 Watts removeCROWN CT-4150 POWER POWER AMPLIFIER 4Χ150W/8OHM removeLABGRUPPEN fP 2400Q DIGITAL S.M.P.S 4X380W removeELECTRO VOICE CPS4.10 4-channel Class-D amplifier slot f. optional RCM810 remote module 4 x 1000 W remove
ImageL-ACOUSTICS LA4X Amplified controller with pfc 4 x 1000 w /8 ohms. Ethernet network
SKUE008431LDDP4950T-2408CT-4150FP 2400Q S.MCPS 4.10
Rating
PriceCall for Price 803.51 incl. GR VAT 1,488.00 incl. GR VAT 1,319.00 incl. GR VAT 2,914.00 incl. GR VAT2,740.09 incl. GR VAT
Stock

Out of stock

Only 5 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityOut of stockOnly 5 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Call for Price

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionDigital amplifier 4 x 1000W@4Ω class D, with switching power supply with Power Factor Correction (PFC). Includes 32-bit Dual SHARC digital processor with 96 kHz sampling with 4x4 routing matrix. At each output it provides EQ station with 8 IIR, 4 FIR linear phase EQ filters and delay from 0 to 1000 ms. It has 4 channels of AVB inputs from 1 stream, 4 channels of AES/EBU (2 x AES3) with SRC, or 4 channels of analog inputs. Speaker outputs with 4 × 4-point speakON® . Controllable via software (LA Network Manager). Weight 11,35 kg.
ContentDigital amplifier 4 x 1000W@4Ω class D, with switching power supply with Power Factor Correction (PFC). Includes 32-bit Dual SHARC digital processor with 96 kHz sampling with 4x4 routing matrix. At each output it provides EQ station with 8 IIR, 4 FIR linear phase EQ filters and delay from 0 to 1000 ms. It has 4 channels of AVB inputs from 1 stream, 4 channels of AES/EBU (2 x AES3) with SRC, or 4 channels of analog inputs. Speaker outputs with 4 × 4-point speakON® . Controllable via software (LA Network Manager). Weight 11,35 kg.
Architecture 4 x 4
Output Power 4 x 1000 W at 4 and 8 ohms
Power supply Universal SMPS with PFC
Inputs AVB, AES/EBU, Analog
Height 2U
Network Milan-certified
The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuit. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 4 Ohms)
4 x 810 W

Rated ouput power (1kHz @ 8 Ohms)
4 x 490 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
2 x 1600 W

Output circuitry
Class H

Frequency response
20 - 20000 Hz

Total Harmonic Distortion (THD)
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>70 dB

Gain
38 dB

Input sensitivity
0.775 V

Protection circuits
DC protection , short circuit , thermal overload

Controls
4 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
4

Speaker output connections
Speakon compatible

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
19,6 kg
 

• Eight and four channel models with 300W and 150W per channel
• Minimal footprint and mass arround 200mm depth and 6 Kg
• Optional Add-on card to interface with third party alarm systems with GPIO connections
• FCM™ Faulty Channel Management system to avoid entire device shutdown
• State-of-the-art layout for maximum performance and reliability
• Highly oversized thermal dissipation design for maximum reliability
• Superb distortion and noise figures
• All channels bridgeable by pairs
• Selectable gain in four channel groups (26, 32 and 38dB)
• Subsonic filter per channel (35Hz user selectable)
• Temperature and signal dependant, intelligent cooling system for minimal
noise
• Optimal heat extraction due to the air tunneled enclosure and insulator-less
power device attachment to the heatsink
• Direct connector-less output for maximum quality loudspeaker control
• High grade engineering inside with the latest SMD technology
• Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection
• Critical electronic and mechanical parts selection
• Innovative protection systems, FCM™ Faulty Channel Management and SSP™
SOA Sentry Protection
• Detented and optionally tamper-proof volume potentiometers
• Hi efficiency, two steps Class H Audio topology
• Protection, Signal and Clip indicators per channel
• Power On and Standby general indicators
• Extremely compact, fully featured QuantaPulse Power supply
• Low current consumption and heat generation allowing less demanding
conditions for multiple amplifier installations
• Factory preset worldwide mains voltage power supply
• Laser cut four milimeters aluminium front panel
• Rugged 2U steel chasis

 

  OUTPUT POWER T-604 T-1204 T-1208 T-2408
RMS, 1kHz, 1.0% THD+N        
4 ohms 4x 160 W 4x 320 W 8x 150 W 8x 300 W
8 ohms 4x 115 W 4x 220 W 8x 100 W 8x 195 W
Bridge @ 8ohms 2x 320 W 2x 640 W 4x 300 W 4x 600 W
Pink Noise 12dB CF        
4 ohms 4x 210 W 4x 415 W 8x 180 W 8x 370 W

Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz

Phase Response (@1W 20Hz-20kHz): ±15deg

Total Harmonic Distortion (20Hz-20kHz):
Intermodulation Distortion (SMPTE):
Crosstalk (20Hz-20kHz): >70dB

Voltage Gain (selectable): 26/32/38 dB

Sensitivity: T604:1.5/0.8/0.4V - T1204:2.1/1.0/0.5V - T1208:1.4/0.7/0.4V - T2408:2.0/1.0/0.5V

Signal to noise ratio: T604:107dB - T1204:110dB - T1208:107dB - T2408:110dB

Required AC Mains (@8ohms 1/8 rated power): T604:1A - T1204:1.5A - T1208:1.4A - T2408:2.6A

Dimensions (WxHxD): 483x88.9x210 mm - 19x3.5x8.27 inches

Weight (Net): T604/T1204: 5.4Kg - 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs

Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™

Model    CT475
Product Type    Amplifier
Channels    4
Sensitivity    1.4V
Rated Power Output    75W per Channel into 8 ohms
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted    110dB
Total Harmonic Distortion (THD) (full rated power, 20Hz - 20kHz)    Intermodular Distortion (from 0dB down to -40dB)    Frequency Response (at 1W into 4/8 ohms)    ± 0.5dB
Crosstalk (below rated power 20Hz to 1kHz)    > 70dB
Common Mode Rejection (20Hz to 1kHz)    > 55dB, typically > 70dB
Dimension (H x W x D)    1.75" x 19" x 14.25“
Weight    10 lbs (4.5 kg)
Shipping Weight    15 lbs (6.8 kg)
      Top

High-tech in professional amplification!

The fP 2400Q is a lightweight and space-saving four-channel power amplifier, ideal for
use in high quality touring sound systems as well as in demanding permanent installations.
The fP 2400Q offers a diverse choice of applications, such as: multi-channel monitor
systems, four-channel reproduction, and compact amplification in active 2-, 3-, and 4-way
systems.
The fP 2400Q makes possibile the bridge connection of one or two of the two pairs of
channels (channel A and B and/or channel C and D). It also features Lab.gruppen?s unique
power matching solution, the MLS switch, which offers endless combinations for solving
most of the problems related to varying impedances and maximum power capacities of
loudspeakers. The latest semiconductor technology is utilized in the new ferrite Power (fP)
amplifiers.
This, together with Lab.gruppen?s proprietary copper cooling system, Intercooler?, enhances
the 2 ohms capacity. Two easily accessible dust filters on the front ensure a clean front-to-rear
airflow. Additionally, a new Bi-phase wiring scheme also increases the capacity of the switch
mode power supply. This extends the power bandwidth in the low end.

Key Features:
4 x 370 watts @ 8 ?
4 x 380 watts @ 4 ?
4 x 500 watts @ 2 ?
(Measured just below clip level, with all 4 channels driven)
Light weight and compact: only 8.6 kg (19lbs), 2U high
MLS? Switch: Lab.gruppen?s unique power matching for different loads

New Features:
Replaces the LAB 1200C
Easily accessible dust filters
Improved low-end power bandwidth
Extruded front panel for increased stability

Besides the traditionally superb Lab.gruppen sonic performance, there is a full line of features
to make the fP family functional in all situations from installation to high performance live
sound systems:

Regulated switch mode power supply
Today there are many lightweight, switch-mode amplifiers in the market. However, the unique
Lab.gruppen switch-mode power supply technology offers a number of essential advantages
that make it superior to other and seemingly similar power supply designs. The most important
features are the regulated power supply and the extreme power efficiency. The regulated power
supply easily deals with a very high variation in the AC mains voltage: it can drop by up to 20%
below its nominal level - e.g. to 180 V instead of 230 V ? without any problem. Perhaps even
greater benefits result from the extreme efficiency of Lab.gruppen amplifiers: only a fraction of the
energy from the AC mains is turned into heat.
A regulated power supply also presents some other sonic advantages, such as better cone control
and the same fast response as a conventional power supply.

Sophisticated protection circuitry, combining:
ALS? short circuit protection; the Adaptive Limiting System permits very high peak currents, but
keeps the amplifier within the Safe Operation Area
DC protection; protects against infrasonic signals
VHF protection; protects the loudspeakers against strong very high frequency non-musical signals
above the audible range
Thermal protection; prevents the amplifier from being overheated. The protection indicators on the front
panel are switched on, as a warning, before the protection process is initiated
AC protection; shuts down the power supply if the line voltage is outside the operating voltage
Clip limiter; prevents severely clipped waveforms from reaching the loudspeakers, whilst maintaining
full peak power.

Amplifier Gain 32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs 4, electronically balanced, Phoenix-type
Audio Network No
CAN Bus Interface Yes (With Optional RCM-810 Card)
Continuous Rated Power
(1 kHz, THD 1%) 100v 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 2Ω 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 4Ω 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 70v 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 8Ω 500 Watts
Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Cooling Front-to-Rear, continuously variable fans
DIM 30 0.02 %
Electronics Type Amplifier
Frequency Response 15 Hz-30 kHz
Input Impedance (Balanced) 20 kΩ
Input Sensitivity 0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100V
Intermodulation Distortion (SMPTE) 0.05 %
Mains Voltage 220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz
Network Control (IRIS-Net) Optional
Total Harmonic Distortion 0.05 %
Variable Load Drive (VLD) Yes
Height 2RU 88.1 mm (3.47“)
Width 483 mm (19.02“)
Depth 421.5 mm (16.59“)
Weight Net 11.1 kg (24.47 lbs)

aposirsi_electrovoice

WeightN/A19.60 kg6.20 kg6.80 kg10.20 kg11.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 19.60 kg
Weight 6.20 kg
Weight 6.80 kg
Weight 10.20 kg
Weight 11.10 kg