| Content |
The BCL20 is a broadcast quality dual Compressor/Limiter with a built in De-Esser
function, designed for FM transmitter protection and disc mastering as well as PA
and studio applications. The unit may be operated as two independent channels or
linked for stereo programme processing. The BCL20 offers full control over Threshold,
Ratio, Attack, Release and Gain make up. Each channel has two high resolution
twelve segment LED bargraphs, one to display gain reduction and another which can
be switched to display input or output level. The I/O meter can be switched between
Peak or VU response. A unique feature of the BCL20 is the inclusion of control over the
detection characteristics, which can be mixed between Peak and RMS levels. This
enables the compressor to be made sensitive to high energy transients or to wider
programme modulations. The De-Ess function is activated by means of a single switch
which inserts a slew rate sensitive filter into the side chain to produce frequency conscious
compression in accordance with FM transmission or disc mastering pre-emphasis. A rear
panel jack insert point allows the connection of an external equaliser in the sidechain for other
frequency conscious processing applications. The BCL20 is equipped with high impedance
balanced inputs and transformer balanced outputs on XLRs. The output stage features a unique
Transformer Distortion Cancellation circuit, which reduces transformer distortion to negligible
levels. The BCL20 is manufactured in accordance with directives encompassed within the 'CE'
regulations particularly those concerned with RFI protection.
Main Features
Broadcast specification
Low Noise and Distortion
Dual level sensing in Stereo Mode
RMS/Peak detection mix feature
Integral De-Esser function
Ultra fast 1mS peak limiting
High resolution input/output and Gain reduction metering
Transformer balanced outputs featuring unique Distortion Cancellation circuitry
Switch status LEDs
SPECIFICATIONS
Frequency Response 20 Hz to 20 kHz +/- 0.5dB
Signal to Noise Ratio + 4 dBu Input, + 4 dBu Output -94 dB
Input Impedance 20k Ohms balanced
Output Source Impedance 20 Ohms
Output Load Impedance 600 Ohms to infinity
Maximum Input Level + 20 dBu
Maximum output Level 600 Ohms Load, 1 kHz + 20 dBu
Total Harmonic Distortion (THD)
+ 4 dBu Output,
1 kHz, 10 dB compression 0.07 %
1 kHz, by-pass 0.01 %
Intermodulation Distortion 0.01 %
Compression Ratio
Continously variable
from 2 : 1 to 20 : 1
Attack Time (Peak)
Continously variable from 0.1 to 70 millisec.
Release Time (Peak)
Continously variable from 100 millisec to 3 sec.
Attack Time (RMS)
Program dependant Typ. 12 ms for 12 dB.
Typ. 4 ms for 24 dB.
Release Time (RMS)
Program dependant
Typ. 120 ms for 12 dB
Typ. 240 ms for 24 dB
Mains power Consumption (115/220 VAC, 50-60 Hz) 6 Volts-amps
Meter Calibration 0 Vu = + 4 dBu
Maximum Gain Reduction more than 50 dB
DS Action 12 dB at 8 kHz
Input Connector XLR 3 pin balanced
Output Connector XLR 3 Pin balanced
Dimensions 483mm W x 190mm D x 44.5mm H
19“W x 7.5“D x 1.75“H
Weight 3.9kg, 8.6lbs
Shipping Weight 4.8kg, 10.6lbs
Temperature Range
Operating 0C to +50C
Storage -30C to +75198>C
Note:
In these specifications, 0 dBu is referenced to 0.775 V RMS
| Bring a more professional sound to your mix
Adding a dbx® 266xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments.
dbx knows compressors...after all we invented them! The 266xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 266xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches.
Features
- Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
- New gate timing algorithms ensure the smoothest release characteristics
- Program-adaptive expander/gates
- Great sounding dynamics control for any type of program material
- Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
- Stereo or dual-mono operation
- Balanced inputs and outputs on 1/4" TRS and XLR connectors
- Side Chain insert
- Classic dbx® "Auto" mode
Specifications
| Input Connectors |
1/4" TRS and female XLR (pin 2 hot) |
| Input Type |
Electronically balanced/unbalanced, RF filtered |
| Input Impedance |
40kΩ balanced/unbalanced |
| Max Input |
>+22dBu Balanced or Unbalanced |
| Output Connectors |
1/4" TRS, female XLR (pin 2 hot) |
| Output Type |
Impedance-balanced/unbalanced, RF filtered |
| Output Impedance |
+4dBu: 100Ω balanced, 50Ω unbalanced; -10dBu: 1kΩ balanced, 500Ω unbalanced |
| Max Output |
>+21dBu balanced/unbalanced into 2kΩ or greater; >+18dBm balanced/unbalanced (into 600Ω) |
| Sidechain |
1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return) |
| Sidechain Impedance |
Tip = >10kΩ (Input), Ring = 2kΩ (Output) |
| Sidechain Max Input Level |
Tip = >+22dBu (Input) |
| Sidechain Max Output Level |
Ring = >+20dBu (Output) |
| Compressor Threshold Range |
-40dBu to +20dBu |
| Compressor Threshold Characteristic |
Selectable OverEasy® or hard knee |
| Compressor Ratio |
1:1 to Infinity:1 |
| Compressor Attack Time |
Scalable Program-Dependent AutoDynamic™ |
| Compressor Release Time |
Scalable Program-Dependent AutoDynamic™ |
| Expander/Gate Threshold Range |
-60dBu to +15dBu |
| Expander/Gate Ratio |
1:1 to 4:1 |
| Expander/Gate Attack Time |
|
|
The S com 4 is a compact and versatile single-rack space device that provides
four channels of high quality dynamics processing with an Expander/Gate and
Compressor/Limiter on each channel.
The four channels operate independently or in stereo pairs. Its multi-segment LED
metering displays input/output level as well as gain reduction. The Expander/Gate
section features a continuously variable Threshold control as well as a switch for
fast or slow release times.
The Compressor/Limiter section includes variable Threshold, Ratio and Output levels.
S com 4's Enhancer switch restores high frequencies that are sometimes diminished
by heavy compression. This wide-ranging combination of features makes the S com
4 an efficient and versatile audio tool for a wide variety of applications. Its clean and
quiet audio characteristics make it ideal where high sonic integrity is imperative.
FEATURES:
4 Channel Compressor/Limiter, Expander/Gate with Enhancer
Linkable in two Stereo pairs
Expander/Gate with variable Trigger control and switchable Fast/Slow Release
5 Segment LED meters for Input/Output levels and Gain Reduction on each channel
Advanced circuit design utilizing Low Noise Operational
Amplifiers and High Quality VCA's
Servo Balanced Inputs and Outputs on XLR and 1/4" connectors
SKD (Smart Knee Detector) circuit automatically switches from soft to hard knee
based on the level of Input signal applied
Individual Threshold and Ratio controls on each channel
Three-year extended warranty
|
Interactive Reference-Class 2-Channel Expander/Gate/Compressor/ Peak Limiter with
Integrated De-Esser, Dynamic Enhancer, Tube Simulation and Low Contour Filter
Whether you?re recording, mixing or mastering, the COMPOSER PRO-XL MDX2600
gives you total dynamic control. It includes all of the features you would expect from
a reference class compressor?plus a voice-adaptive de-esser, a new dynamic
enhancer, authentic tube emulation and much more. These are some of the indispensable
tools for producing clean, consistent audio with virtually no loss in signal quality.
Features:
Switchable IKA (Interactive Knee Adaptation) program-adaptive compression circuitry
combines the advantages of hard-knee and soft-knee characteristics
Integrated de-esser with switchable male/female voice recognition removes excessive
sibilance from your vocal tracks
IGC (Interactive Gain Control) peak limiting circuitry combines clipper and program
limiter for reliable and inaudible protection against signal peaks
Switchable dynamic enhancer for brilliant, lively audio even with heavy compression
IRC (Interactive Ratio Control) expander/gate circuitry for virtually inaudible
noise suppression
Switchable tube simulation for the extra warmth and transparency of classic
tube circuitry
Automatically or manually adjustable attack and release times
Switchable low contour filter prevents "pumping" due to low-frequency
dominated compression
Stereo couple function with independent output level settings
Switchable side chain input with side chain monitor function
Ultra low-noise 4580 operational amplifiers and state-of-the-art THAT¬ VCA's
Separate 12-segment LED meters for input/output levels and gain reduction
Dedicated "traffic light" threshold and de-esser level displays
High-quality detented ALPS¬ potentiometers and illuminated switches
Servo-balanced inputs and outputs with ? in. TRS and gold-plated XLR
connectors
Relay-controlled hard bypass switch with auto bypass function in case
of power failure
Manufactured under ISO9000 certified management system
| L-1102 Leveler/Limiter
* Program dependent attack and release for transparent operation.
* Noise gate to cut off system background noise when there is no
signal.
* In limiter mode sense signal is from the amplifier output.
* Limits 4 ohm, 8 ohm, 25 V, 70 V and 100 V amplifier outputs.
* 20 dB gain in signal leveler mode.
* Security cover and rack-mount ears included.
* Five year warranty. |
The latest addition to the 10 Series product line, the dbx® 1074 QuadGate™, is the perfect companion to the 1066 and 1046. The 1074 offers 4 channels of gating with threshold, depth and release controls on each channel. The 1074, like the rest of the products in dbx 10 Series, is based on the legendary dbx V2 VCA and offers XLR inputs and outputs, and 1/4” side-chain input. In addition to an external key input per channel, the 1074 also has an internal filter that can be independently activated and controlled on a channel-per-channel basis. This filter allows the 1074 to not only clean up tracks, but gives you frequency selective control on each gate, to open exactly when you want it to. These features combined, make the 1074 an absolute must for those who require quad gating on applications including: Gating dry and percussive sounds such as snare drum and kick drum,gating sounds that have longer decay times such as cymbals and Pianos, gating hum or buzz from live instruments or recorded tracks or eliminating Headphone leakage into microphones. Gating instrument microphones to eliminate amplifier bleed.
From the company that has been redefining the standard of signal processing for more than 30 years, dbx® Professional Products comes a bulletproof product that caters to the scrutinizing needs of those who require the precision noise gating capabilities. Once again, the engineering staff at dbx® Professional Products have taken technology that has been over three decades in the making and have created a product that is flexible, versatile and rock solid in construction design. The 1074ʼs independent channel design with key filtering capabilities make it the perfect tool for countless applications.
- Four independent channels of gating
- Independent key filtering
- Independent Threshold and Release controls
- Differentially balanced gold-plated XLR and 1/4" inputs and outputs
- True RMS level detection
- Stereo Coupling mode
- Switchable +4dBu or -10dBv operation per channel
| Input Connectors | XLR (Pin 2 and tip hot) | | Input Type | Electronically balanced/unbalanced, RF filtered | | Input Impedance | Balanced > 50 kOhm, unbalanced >25 kOhm | | Max Input | > +22 dBu balanced or unbalanced | | CMRR | 40dB: Typically >55 dB at 1 kHz | | Key Input | Electronically balanced/unbalanced, RF fitered Balanced 50kOhm, unbalanced > 25 kOhm | | Output Connectors | XLR (Pin 2 hot) | | Output Type | Servo-balanced/unbalanced, RF filtered | | Output Impedance | Balanced 60 Ohm, unbalanced 30 Ohm | | Max Output | > +22 dBm balanced, > +20 dBm unbalanced | | Bandwidth | 20 Hz to 20 kHz, +0/-0.5 dB | | Frequency Response | 0.35 Hz to 200 kHz, +0/-3 dB | | Noise | | | Dynamic Range | > 115 dB, unweighted | | THD+Noise | 0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain), | | Interchannel Crosstalk | | | Stereo Coupling | True RMS Power Summing | | Operating Voltage | 100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz | | Power Consumption | 30 Watts | | Fuse | 100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T | | Power Connector | IEC receptacle | | Unit Weight | 6.9 lbs. | | Shipping Weight | 9.3 lbs. |
|
Reviews
There are no reviews yet.