LA AUDIO DI-2 DI Box
€77.00 incl. GR VAT
Available on backorder
EAN: N/AWeight | 1.00 kg |
---|
Quick Comparison
LA AUDIO DI-2 DI Box remove | DBX DB-10 PASSIVE DI-BOX WITH GROUND LIFT remove | ARX DI-PLUS 2 STEREO ACTIVE D.I BOX remove | DOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand- remove | LD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY remove | OMNITRONIC LH-060 2-channel DI box/splitter, passive remove | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | LA AUDIO DI-2 DI Box remove | DBX DB-10 PASSIVE DI-BOX WITH GROUND LIFT remove | ARX DI-PLUS 2 STEREO ACTIVE D.I BOX remove | DOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand- remove | LD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY remove | OMNITRONIC LH-060 2-channel DI box/splitter, passive remove | ||||||||||||||||||
Image | ||||||||||||||||||||||||
SKU | H30LD00000 | DBX DB-10 | DI-PLUS 2 | 275 | LDI02 | LH060 | ||||||||||||||||||
Rating | ||||||||||||||||||||||||
Price | €77.00 incl. GR VAT | €112.00 incl. GR VAT | €203.11 incl. GR VAT | €73.93 incl. GR VAT | €58.64 incl. GR VAT | €73.35 incl. GR VAT | ||||||||||||||||||
Stock | Available on backorder | Available on backorder | In stock | In stock | Only 5 left in stock | Available on backorder | ||||||||||||||||||
Availability | Available on backorder | Available on backorder | In stock | In stock | Only 5 left in stock | Available on backorder | ||||||||||||||||||
Add to cart | ||||||||||||||||||||||||
Description | ||||||||||||||||||||||||
Content | The Di2 Mk3 is a single channel Active DI housed in a tough extruded aluminium case, which may be powered from Phantom Power, or by two internal PP3 batteries. Low power consumption circuitry extends battery life up to 300 hours. Unintentional battery drain is avoided through use of automatic Phantom Power detection and automatic power shut-off on disconnection of the input signal. |
At dbx, when we do something, we do it right. So when we decided to create our new direct injection boxes, we didnʼt settle for the same old tired approach to direct box design. With our dbx name on the line, how could we? One look at our new dB10 Passive and dB12 Active direct boxes will tell you that these are clearly different. With their bullet-proof construction, and extraordinary audio performance to rival their looks, finally thereʼs a direct box worthy of the dbx name. So whether you need to control the level, placement in the mix, or overall characteristics of 4 independent signals or control the gain leveling on a couple of stereo pairs, the dbx dB10 dB12 is for you. dB10 Specifications INPUT SECTION Input: 1 instrument/line/speaker level Connector: 1/4" jack Type: Unbalanced, RF filtered Impedance: 150k Ohm typical Max Input Level: +20dBu (0dB pad) Thru Output: 1 parallel connection from input jack Connector: 1/4" jack Type: Unbalanced, RF filtered Main Output: 1 line level Connector: XLR male jack Type: Balanced Impedance: 150 Ohm typical Max Output Level: 0dBu PERFORMANCETransformer: Custom dbx mu-metal-shielded Frequency Response: 20Hz to 20kHz, +/-2.5dB Noise: THD: GENERALDimensions: 5.82" L X 5.44" W X 2.20" H (148 x 138 x 56mm) Weight: 1.4 lbs / 0.65 kg Note: Specifications subject to change without notice. |
Phantom or battery powered in a rugged steel chassis Precision engineered Level control Rugged all-steel case |
DOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand- The AC 275 is an active, phantom powered direct box. Unlike a passive DI where the frequency response of the signal can be altered depending on the connected impedance, an active DI buffers the input signal with an amplifier. This assures that the sound source will reach the mixer balanced and noise-free. Housed in a cast alloy chassis, the AC 275 supplies two, high impedance, unbalanced 1/4" jacks and one low impedance balanced XLR jack. It operates with battery or phantom power.
| User´s Manual
LD Systems LDI02
DI Box active
Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated),
extremely low battery consumption. Battery: 9 V block (not included).
Product type DI Boxes
Channels 1 Inputs 2 Input connectors 6.3 mm Jack , XLR Max. input level + 10 / + 30 dBu dBu Input impedance 1 M Ohm(s) Outputs 1 THRU outputs/channel 1 Output connectors XLR Frequency response 20 - 20.000 Hz THD Indicators Power Controls ground lift , Power Operating voltage +48 V phantom power , 9 V block Cabinet material metal Cabinet surface painted Width 135 mm Depth 128 mm Height 53 mm Weight 0,645 kg |
2-channel DI box/splitter, passive Converts 2 separate unbalanced line inputs (e.g. instruments) into 2 balanced XLR outputs for connecting a mixer Switchable to split mode (input 1 routes the signal to both outputs) Switchable input attenuation: 0 dB, -20 dB, -40 dB Ground-lift switch eliminates ground loop problems 2 signal inputs via XLR/jack combo connectors 2 low-impedance XLR outputs Modern convex housing design Full rubber housing corners for safe operation Cables can be routed under the housing | ||||||||||||||||||
Weight | 1.00 kg | 0.65 kg | 0.60 kg | 2.50 kg | 0.70 kg | 0.70 kg | ||||||||||||||||||
Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||
Additional information |
|
|
|
|
|
|
Reviews
There are no reviews yet.