Content | The GH50L is a single channel master volume style head with footswitchable gain. It is capable of a huge variety of sounds, from sparkling clean through powerful crunch to full on monster tones and everything in between. If tone capable of turning people's heads at 100 yards is what you're after - look no further. As well as astounding tone these heads offer a valve-coupled effects loop and link jacks for slaving several heads together. The GH50L features an ECC83 equipped preamp and EL34 output section, easily switchable for 5881's. The GH50L is designed to be used with the GS412IA and GS412IS cabinets - to enhance the amplifiers huge tonal range and produce stunning tone at any volume.
Power: |
50 Watt |
Channels: |
1 : with footswitchable Gain |
Equalizer: |
3 Band EQ |
Inputs: |
Ηι & Lo Jacks, Slave In |
Outputs: |
Speaker connections 1 x 16 Ohm, 2 x 16 Ohm, 1 x 8 Ohm , 2 x 8 Ohm, Slave Out |
Effects: |
- |
Valves: |
2 x EL34B-STR Power Tubes, 4 x 12 AX7 Preamp Tubes |
Foot-switch: |
- |
Controls: |
Resonance, Presence, 3 Band EQ, Master Volume, Gain, Drive |
FX Loop: |
FX Send / FX Return / FX Return Level |
Dimensions ( W x H x D ): |
67.8 cm x 24 cm x 25.3 cm |
Weight: |
20 kg |
|
Marshall 50 Watt and 100 Watt, EL34 driven, valve power stages are, in the minds of many, the 'industry standard'. As soon as you hear Marshalls 50 Watt + 50 Watt, EL34 50/50 and the 100 Watt + 100 Watt, EL34 100/100 valve power amps, you will immediately understand why. Both of these eye catching units are packed with Marshall valve tone. Just like expensive hi-fi amps, both the EL34 50/50 and EL34 100/100 are Dual MonoBloc amplifiers - meaning that each side (channel) of the stereo amplifier operates as a completely independant unit. Each channel features its own Gain and Presence controls and our highly specialised 'True Differential Inverter' circuitry, ensures that the maximum integrity and pureness of their valve tone is maintained. Each channel also boasts a remotely switchable 'Voice' switch which takes you from 'traditional' (Voice A) to 'modern'(Voice B) and will allow you to cut through any mix, The Marshall EL34 50/50 and Marshall EL34 100/100 - professional, all-valve power amps that sound as good as they look!
|
100W HEAD guitar amplifier, 4 channels with digital Pre-amp & 4xEL34 Power Amp valves, 4 Modulation effects, 3 Delay effects, reverb. Footcontroller included.
Features - Power rating: 100W
- Preamp: Digital Natural Harmonic Technology
- Power amp tubes: 4 x EL34
- Preamp topologies: 16
- Modulation effects: Chorus, Phaser, Flanger, Tremolo
- Delay effects: Hi-Fi Analog, Tape, Multi
- Reverb: Independent custom voiced
- Midi Control: Midi in, Midi Thru
- Stompware controller: supplied
- Emulated line out: XLR
- Headphone out: 1/4" jack
- Line in: 1/4" jack
- Preamp: 1/4" jack
- Effects loop: Serial / Parallel -10dBV / +4dB with mix control
- Speaker output: 1x16 Ohm, 1x8 Ohm, 2x 16 Ohm
| Palmer EINS - Amazingly versatile!
Small 1-5W amps have become very popular in recent years. They are fun items but some seem more like toys than real amplifiers.Palmers approach with the EINS was to design a serious true tube amplifier for professional purposes. The speaker simulated output allows you to connect the output of the amp directly to your audio interface. Thanks to the integrated loadbox aspeaker does not need to be connected. Thanks to the unique "HiZ output” you can connect the output of the EINS directly to the input of any amplifier! This way the EINS can be power boosted or used as a preamp or even on your pedalboard.
The Palmer EINS comes with an ECC83 preamp tube (V1) and an ECC82 (V2) power stage tube as standard. Other tube configurations are possible as follows.
- 1: V1:ECC83 - V2:ECC83: Quieter, distorts much faster, a little more gain, lead sound.
- 2: V1:ECC83 - V2:ECC81: Louder than Variation "1“, quieter than the standard configuration, more gain, distorts a little more quickly.
- 3: V1:ECC81 - V2:ECC82: Stays clean a little longer, a little more headroom, darker distortion sound.
- 4: V1:ECC81 - V2:ECC83: The quietest configuration, distortion sets in a little later than with Variation "1“, distortion can be controlled very precisely.
- Type: head
- technology: Tube
- class: A
- power: 1 W
- Inputs: 1
- input connectors: 6.3 mm Jack
- Input impedance: 1 M ohm
- outputs: 4
- output connectors: 6.3 mm Jack
- output impedance: Speaker out: 8 & 16 Ohm, Simulated out: 4k, HiZ out: 3,3M ohm
- Channels: 1
- Indicators: Power
- controls: Level, Tone
- FX loop: no
- Power supply: 230 VAC
- Power consumption: 10 W
- preamp tubes: ECC83
- power amp tubes: ECC82
- rectifier: solid state
- cabinet material: sheet steel
- Cabinet / Housing surface: powder coated / anodized
- width: 206 mm
- depth: 128 mm
- height: 108 mm
| Featuring a 30 Watt output section the Dual Terror head is the most powerful in the Terror range, offering more clean headroom and volume than the Tiny Terror with the added flexibility of a second channel. The ʽTiny Terror Channelʼ is lifted straight from the original 15 Watt version, retaining the signature tones that made the Tiny Terror such a hit. However, with double the power on offer, it packs an even fiercer punch.
The additional ʽFatʼ channel provides extra girth with its more rounded, slightly gainier character, perfect for leads or for balancing between two different guitars on stage. The Dual Terror switches from 30 to 15 to 7 watts, making it a perfect portable amp head for both for studio and stage. |
Info
Marshall 2555X Silver Jubilee, all-valve electric guitar head, 100W, 2 channels, preamp tubes: 3x ECC83, power amp tubes: 4x EL34, 1x input, controls: input gain (push/pull: rhythm clip), lead master, output master, treble, middle, bass, presence, pentode/triode switching, FX loop, DI out, incl. footswitch (channel change), speaker outputs: 1x 16 ohms, 1x 8 ohms (or 2x 16 ohms) & 1x 4 ohms (or 2x 8 ohms), dimensions: 750 x 230 x 310mm, weight: 22,1kg
|
Reviews
There are no reviews yet.