| Content | The Laney GS412PS angle fronted cabinet is rated at 240 watts RMS mono 16 Ohms or can be used in Stereo mode, where it's rating is 2 × 120 watts RMS 8 Ohms. Loaded with 4 × 12″ Celestion Vintage 30 drivers which are the pro players choice.
| Power: |
240 Watts Power Handling Mono @ 16 Ohms, 2 x 120 Watts Stereo @ 8 Ohms |
| Drivers: |
4 x 12'' |
| Dimensions ( W x H x D ): |
755mm x 826mm x 355mm |
| Weight: |
47 kg |
|
1960A JOE SATRIANI SIGNATURE CAB The Marshall 1960A JSB Joe Satriani Speaker Cabinet is an external speaker cabinet to match the JVM410HJSB Head, offering 300 watts of power. The Marshall 1960A Joe Satriani has been made to Joe's specifications and preferences, featuring four 12 inch Celestion 75 watt speakers, housed in a rugged, special blue colour chassis.
Features/Specifications: 1960AJSB:
- Type: Speaker Cabinet
- Output (RMS): 300 Watt
- Speakers: 4 x 12" Celestion 75 speaker
- Impedance: 16/4 Ohm Impedance (Mono)/8 Ohm Impedance (Stereo)
- Dimensions (mm): 760 x 830 x 365
- Weight (kg): 36.4Kg
| Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:
- Front-mounted speakers
- Detachable grill
- Solid workmanship
- Speaker mount and quality check carried out in Germany
- Cabinet impedance (Mono): 8
- Cabinet impedance (Stereo): 16/Speaker
- Power Rating (Mono): 120 W
- Power Rating (Stereo): 60/Speaker
- Cabinet weight without speakers: 15,6 kg
- Back: Closed
- Dimensions (WxDxH): 48x71x29 cm
- Front Grill: Fabric, detachable
- Speaker Mounting: 2 x 12" front mounted
Vintage 30
Back in 1986 a new breed of hard rock player was on the rise. To meet the demands of the players and their increasingly ʽhot-roddedʼ amplifiers, we set out to develop a modern speaker, capable of handling much more power and overdrive. To achieve this, we coupled our ʽHʼ magnet (the closest in performance to Alnico) with a new cone and voice coil employing contemporary materials.
Our most revealing speaker, the Vintage 30 features enormously detailed and complex overtones, a warm low-end, a famously rich vocal mid-range and a beautifully detailed top-end. Used singly to reveal the complexities in hand-wired boutique amps, or in quartets for a wonderfully intricate vintage 3D crunch, the Vintage 30 sound has been captured on thousands of recordings from a diverse range of notable players including Slash, Steve Stevens and Peter Frampton.
Specifications
- Nominal diameter: 12“, 305 mm
- Power Rating: 60 W
- Nominal impedance: 8 ohms
- Sensitivity: 100 dB
- Chassis type: Pressed steel
- Voice coil diameter: 1,75“, 44,5 mm
- Voice coil material: Round copper
- Magnet type: Ceramic
- Magnet weight: 50 oz, 1,42 kg
- Frequency range: 70 - 5000 Hz
- Resonance frequency, Fs: 75 Hz
- DC resistance, Re: 7,3 ohms
| Info
Marshall 2551BV Silver Jubilee, guitar cabinet, 280W, 16/4 ohms mono & 8 ohms stereo, 4x 12" Celestion Vintage 30 speaker, dimensions: 770 x 755 x 365mm, weight: 41,4kg. | Marshall 1960A 300W Guitar Speaker Cabinet
The only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4x12 cabs are indeed "the business.“
Great sound and looks however are not everything. Many years of experience mean that Marshall's speaker cabinets are also built to stand the test of time. Their highly skilled craftsmen construct them from the finest quality materials with precision corner locked joints, tough cotton backed PVC covering, heavy-duty hardware, and the highest quality fittings.
The Marshall Stack
If one thing personifies the image of rock 'n' roll more than anything else it's the Marshall 4x12. Though often imitated, nothing compares with the original. The first 4x12 cab was designed and built by Jim Marshall in 1962. Since then they have made many thousands, which have appeared on stages both large and small all over the world.
After the initial success of the Marshall 4x12, it wasn't too long before they designed and built the first stack, where an angled cabinet sits on top of a straight fronted cab, with the amplifier placed on top. This came about after discussions with Pete Townshend of The Who. Pete and Jim Marshall sat down and discussed The Who's requirements for an 8x12 cab with an angled top. This was designed and built, but due to this awesome cab being somewhat cumbersome, only 6 were ever made.
As a result, we came up with the more practical idea of stacking an angled cab on top of a straight fronted model. Thus the famous Marshall stack was born. What happened to the six 8x12 cabs do we hear you ask? Well, two went to Pete Townshend, two went to John Entwhistle and the remaining two went to the Small Faces. The Marshall stack, on the other hand, has stayed in production ever since and has gone on to become the most recognizable rock 'n' roll icon.
As we invented the stack, Marshall 4x12's are the only true originals. Everything else is merely an imitation.
The 1960A is switchable from mono [4 or 16 Ohms] to stereo [8 Ohms per side], and is equipped with Celestion G12T-75 speakers.
The highest quality woodwork includes the "corner locking" of each and every joint. This helps give Marshall cabinets the incredible strength and durability, which has become as legendary as the Marshall sound itself.
Heavy-duty Grab Handles are fitted to all Marshall cabinets. Their tough, ergonomic recessed casing design gives easy access to the bar of the handle without affecting the cabinet's smooth lines.
No sharp metal edges or rough fittings ??? the smooth ABS plastic Marshall corner fits perfectly and offers excellent protection to all 8 cabinet corners.
Technical Info
Black grille cloth
White piping
Black elephant grain vinyl
Speaker: 4 x 12 in. G12T-75
Power: 300 watt
Impedance: 4 or 16 ohms mono/8 ohms stereo
Dimensions: 760 x 830 x 360mm
Weight: 36.4 kg | Fitted with a pair of Celestion Vintage 30 speakers, the PPC212OBʼs design accentuates the top end frequencies whilst softening the bass response. The split rear panel means the delivery is less directional, creating an airy, spacious and three-dimensional sound. The added presence and chime makes the PPC212OB especially suited for cleaner styles, or for players who want a more vintage combo-type tone from their amp head. The PPC212OB features an 18mm birch plywood shell with our signature skid runners secured to the base to help acoustically couple the cabinet to the stage. |
Reviews
There are no reviews yet.