| Content | Expansive Capabilities
The IRT-X is a portable active speaker which gives a Full-Range Flat-Response (FRFR) output that can be used in many different scenarios. It features 200 watts of power through an 8" studio-quality woofer with a 1" compression driver giving you ultimate power and dynamic range. Its key design is to be used with a guitar amp as an auxiliary speaker, where it provides tonal and volume expansion to your sound. The IRT-X can also be used as an FRFR monitor for amp-modelling setups as it provides clean and neutral amplification, or it can even be used as a PA speaker or personal monitor. Depending on your requirements, this can solve many different problems or become the core solution to your tonal needs.
Guitar Cabinet Expansion
At its heart, the IRT-X is a unique product in the market, where it is designed to be placed in-between your power amp output and your speaker. It takes the signal from your amplifier and, using clever on-board electronics, it re-amplifies that tone and expands it. The original signal returns to your current speaker unaffected, giving you two speakers of expanded tone. This can be used to fit many different setups:
Amplify a low-powered amplifier: Here the IRT-X can be used to take a low-power amplifier that you may enjoy at home but can't use on stage due it's low volume. The IRT-X will take your tone and amplify it to gig-ready levels, meaning you can use that favourite tube amp on stage.
A new effects loop: If your current amp doesn't have an effects loop, the IRT-X comes to the rescue and enables you to channel your tone through a new loop, giving your old vintage amp modern capability and the potential for stereo chains.
Auxiliary speaker for wider tone: The IRT-X can be used in conjunction with your combo amp as an auxiliary speaker and provide you with a wider sound-field and greater projection. In this setup, the IRT-X could provide the front-of-house sound while your amp can be used as a personal monitor.
The IRT-X offers so many options, it really is a unique product that can radically change your tone and change the way you think about live sound!
FRFR Monitor
The IRT-X provides 200 watts of clean amplification in a full-range and flat-response which makes it ideal for modern amplifier-modelling systems and preamps. It can provide you with a neutral and powerful tone to act as your own personal monitor, and give the accurate detail and definition that modelling systems require.
PA Speaker And Monitor
The 200 Watts of clean amplification and multitude of inputs enables you to use the IRT-X as a traditional active loud speaker. Its top-hat mount enables mounting on speaker poles, while the trapezoidal design also allows it to be placed on stage and used as a personal monitor. The DI output enables your instrument or microphone signal to be fed straight to a mixing desk, giving you even more logistical possibilities.
Ultimate Connectivity
Loaded with XLR & Jack inputs, Input Level, Master Volume, Treble and Bass EQ and a Stereo FX loop; the IRT-X ensures that you have every connection you need. Combine that with a Balanced DI out with Switchable Cabinet Emulation options plus Speaker Phase Reversal and your guitar sound has never sounded better. This product can solve many problems and create brand new tones, changing the way you think about your on-stage guitar setup and giving you tones you never thought possible.
Features
200w power through 8" studio-quality woofer and 1" compression driver
Trapezoidal design enables on stage monitor use while top-hat mount enables speaker pole mounting
FRFR for guitar preamp/modelling systems
Guitar cab modelling for use with traditional guitar amp
Balanced DI out
Stereo FX loop
Enables guitar amp-in and speaker-out connections for cab "Expansion"
Specification
Aux in: mini jack
Cabinet Design: offset trapizoidal - upright or monitor orientations
DI socket: balanced di output with source switching
Drivers: high quality flat response 8” bass driver + high quality 1” compression driver
Equalisation: master treble & bass eq
FX Loop(s): stereo fx loop
Inputs: xlr/jack combi inputs
Line in: jack
Packed dimensions: (h x w x d mm)425 x 280 x 265
Power: 200w rms ice power
Unit Dims - for int. Case: (h x w x d mm) 425 x 280 x 265
Cabinet Emulation: switchable cabinet emulation, non, 1 x 12" or 4 x 12" options
Speaker in and thru connectors: jack socket
Speaker Phase Switch: allows for phase reversal of the unit
Ground Lift: hum busting ground lift switches
Pole Stand Fitting: top hat supplied as standard |
Marshall 1960AV 280W 4x12'' Guitar Speaker Cabinet
Marshall Speaker Cabinets
Marshall is the only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4x12 cabs are indeed "the business.“
Great sound and looks however are not everything. Many years of experience mean that their speaker cabinets are also built to stand the test of time. Highly skilled craftsmen construct them from the finest quality materials with precision corner locked joints, tough cotton backed PVC covering, heavy-duty hardware, and the highest-quality fittings.
The Marshall Stack
If one thing personifies the image of rock 'n' roll more than anything else it's the Marshall 4x12. Though often imitated, nothing compares with the original. The first 4x12 cab was designed and built by Jim Marshall in 1962. Since then Marshall has made many thousands, which have appeared on stages both large and small all over the world.
After the initial success of the Marshall 4x12, it wasn't too long before they designed and built the first stack, where an angled cabinet sits on top of a straight fronted cab, with the amplifier placed on top. This came about after discussions with Pete Townshend of The Who. Pete and Jim Marshall sat down and discussed The Who's requirements for an 8x12 cab with an angled top. This was designed and built, but due to this awesome cab being somewhat cumbersome, only six were ever made.
As a result, Marshall came up with the more practical idea of stacking an angled cab on top of a straight fronted model. Thus the famous Marshall stack was born. What happened to the six 8x12 cabs, you ask? Well, 2 went to Pete Townshend, 2 went to John Entwhistle and the remaining 2 went to the Small Faces. The Marshall stack on the other hand has stayed in production ever since and has gone on to become the most recognizable rock 'n' roll icon.
As Marshall invented the stack, Marshall 4x12's are the only true originals. Everything else is merely an imitation.
Heavy-duty castors are fitted as standard to all Marshall full size 4x12's to ensure that these cabinets are ready to roll without rocking.
No sharp metal edges or rough fittings - the smooth ABS plastic Marshall corner fits perfectly and offers excellent protection to all eight cabinet corners.
The highest quality woodwork includes the 'corner locking' of each and every joint. This helps give Marshall cabinets the incredible strength and durability, which has become as legendary as the Marshall sound itself.
Heavy-duty Grab Handles are fitted to all Marshall cabinets. Their tough, ergonomic recessed casing design gives easy access to the bar of the handle without affecting the cabinet's smooth lines.
Technical Info
Standard Marshall 4x12
Black grille cloth
White piping
Large white logo
Black elephant grain vinyl
Angled front
Speakers: 4x12 in. Celestion G12 Vintage 70W S81 speakers SPKR-00022 (also known as Vintage 30)
Power: 280 watts
Mono/Stereo switchable
Stereo Impedance: 8 ohm
Mono Impedance: 16/4 ohm
Dimensions: 760 x 830 x 360 mm
Weight: 40.6 kg
Cover: COVR-00022 optional
|
Marshall 1960BV 300W 4x12'' Guitar Speaker Cabinet
Nothing personifies the image of rock 'n' roll more completely than a wall of Marshall stacks. Though often imitated, nothing compares to the original. The 1960BV is the straight version that features 4 Marshall/Celestion Vintage speakers and is the perfect addition to your stage or recording rig! It's ideal for players who appreciate a lot of low end, without all the boomyness.
Marshall 1960BV at a Glance:
- Incredibly flexible 4x12 straight cab
- Low End That Never Gets Boomy
- Slightly brighter sound than a straight cab
- Sonically speaking, nothing compares to a Marshall amp
- Rugged and ready for the road
The Ultimate in Flexibility
To ensure the ultimate in flexibility, the 1960A (angled) and the 1960B (straight), is switchable between Mono (4 or 16 Ohms) and Stereo (8 Ohms per side). The two Mono impedance options provide extra amp matching capability while the cabinets' stereo capability makes them ideal for rack systems which typically run in stereo.
Low End That Never Gets Boomy
This has a thicker, warmer sound than the 1960A with a fat, well-defined midrange and a rounded high end that sparkles nicely while not being overly bright. It also has a good low end "chunk" which never gets "boomy.“
Offers That Low-End Thump
B (Base) cabinets offer some sonic differences. A straight cab sounds more focused and has more low-end thump. The additional size gives the cabinet a lower resonant frequency for more low-end. All speakers facing the same direction gives a more focused sound. Many players prefer to use only the B cabs, even when they are on stage with a full stack. Zakk Wylde (Ozzy's guitarist) uses only the B cabs because of the tighter low end and because (believe it or not) he values his hearing and the sound from the B cab doesn't hit him directly in the head.
Sonically Superior
The only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4x12 cabs are indeed rock and roll history in a stack!
Ready For Your Gig - Wherever That Might Be!
Roadworthiness is a vital prerequisite in the world of relentless touring and as Marshall's 40 years of cabinet building attests, Marshall cabinets are definitely built to stand the test of time! Their highly skilled craftsmen construct these 4x12s from the finest materials available - 15mm birch plywood with precision 'finger locked' (comb) joints, tough cotton backed PVC covering, heavy duty hardware and the highest quality fittings.
Weighing in at around 80 lbs, the JCM1960BV is made of 15mm birch plywood (except for the back panel, which is medium density fiberboard) and built for tone, projection, and durability. The majority of cabinet construction is done by hand.
Marshall 1960BV Features:
- 300W 4x12 straight 4/16 ohm, mono; 8 ohm stereo.
- The extra warm sounding Marshall/Celestion "Vintage" speaker - rated at 70 watts each - (1960BV/BV)
- Black grille cloth / white piping
- Large white logo
- Black elephant grain vinyl
| 150 Watt, 2x12" Cabinet with Vintage and Heritage Speakers
The Marshall JVMC212 guitar extension cabinet is the perfect partner for any JVM combo or head.
The JVMC212 is designed using only the finest materials and constructed with tried and tested techniques the JVMC212 can output 150 Watts of power through its Marshall/Celestion Vintage and Hertige speakers.
The JVMC212 offers the optimum solution in 2x12" UK built cabinet quality. The JVMC212 is constructed from the finest Baltic birch plywood in the Marshall UK factory and hand covered in traditional and hard wearing Elephant grained vinyl covering. The JVMC is loaded with the finest mix of Celestion heritage and vintage speakers that facilitate the depth and tone guitarists search for, providing a 2x12 extension cabinet that feels larger than life in the way only Marshall know how. The JVMC is suitable for most amp heads.
Product Details:
- Output (RMS): 150 Watt
- Speakers: 1 x Heritage, 1 x Vintage
- Speaker Configuration: 2x12
- Impedance: 16 Ohm
- Dimensions (mm): 673 x 478 x 260
- Weight: 24kg
| Info
Marshall 2551BV Silver Jubilee, guitar cabinet, 280W, 16/4 ohms mono & 8 ohms stereo, 4x 12" Celestion Vintage 30 speaker, dimensions: 770 x 755 x 365mm, weight: 41,4kg. |
1960A JOE SATRIANI SIGNATURE CAB The Marshall 1960A JSB Joe Satriani Speaker Cabinet is an external speaker cabinet to match the JVM410HJSB Head, offering 300 watts of power. The Marshall 1960A Joe Satriani has been made to Joe's specifications and preferences, featuring four 12 inch Celestion 75 watt speakers, housed in a rugged, special blue colour chassis.
Features/Specifications: 1960AJSB:
- Type: Speaker Cabinet
- Output (RMS): 300 Watt
- Speakers: 4 x 12" Celestion 75 speaker
- Impedance: 16/4 Ohm Impedance (Mono)/8 Ohm Impedance (Stereo)
- Dimensions (mm): 760 x 830 x 365
- Weight (kg): 36.4Kg
|
Reviews
There are no reviews yet.