LANEY LH-50 Electric Guitar Head amplifiers

656.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The LH offers the epitome of valve tone and live versatility. A reliable, gig ready head and cab combination with all of the sounds and features required to cover genres from Country to Metal. The LH50 head offers independent Gain and Drive controls on each of itʼs two channels giving the player maximum tonal flexibility […]

 

Read more

The LH offers the epitome of valve tone and live versatility. A reliable, gig ready head and cab combination with all of the sounds and features required to cover genres from Country to Metal.

The LH50 head offers independent Gain and Drive controls on each of itʼs two channels giving the player maximum tonal flexibility for a variety of performance styles.

Each of the LH50ʼs twin channels features their own dedicated drive control, three band EQ, plus global Reverb and overall Tone control.

The benefit of having a Gain on both channels is that even if you want to set one channel up clean you have the ability to add a little drive to it giving you that luxurious gently pushed valve amp sound. No need for a pedal in the front end! Wind the other channel up and hit it hard and the amp sings, rich with harmonics and defiantly screaming its heart out.

On the far right lies the master tone control. This is a very cool idea indeed and acts a lot like your guitars tone pot. This makes for some serious tonal tomfoolery.

The rear panel of the LH50 features an FX loop and the external speaker sockets.

 

Power: 50 Watt
Channels: 2
Equalizer: Yes (Bass, Middle & Treble_
Inputs: FX Loop(s), Hi & Lo Jacks
Outputs: Footswitch, Speaker connections
Effects: Reverb, overall Tone control
Valves: Premium EL34
Foot-switch: FS2 (Not included)
Controls: Gain, 3 Band EQ/ each channel
FX Loop: Yes
Dimensions ( W x H x D ): 556 x 246 x 262
Weight: 14 Kg

 

Weight 14.00 kg

Reviews

There are no reviews yet.

Be the first to review “LANEY LH-50 Electric Guitar Head amplifiers”

Your email address will not be published. Required fields are marked *

Quick Comparison

LANEY LH-50 Electric Guitar Head amplifiers removeBUGERA 6262 INFINIUM Guitar Amplifier with Reverb and INFINIUM Tube Life Multiplier removePALMER AUDIO MI MACHT 402 - 19" Stereo Power Amp for Guitar removeMARSHALL JMD100 100W Head Guitar Amplifier removeMARSHALL JVM-210H Guitar Amp Head 100 Watts removeMARSHALL 4100 Guitar head amplifier JCM 900 100W remove
NameLANEY LH-50 Electric Guitar Head amplifiers removeBUGERA 6262 INFINIUM Guitar Amplifier with Reverb and INFINIUM Tube Life Multiplier removePALMER AUDIO MI MACHT 402 - 19" Stereo Power Amp for Guitar removeMARSHALL JMD100 100W Head Guitar Amplifier removeMARSHALL JVM-210H Guitar Amp Head 100 Watts removeMARSHALL 4100 Guitar head amplifier JCM 900 100W remove
Image
SKUG07LA00010E005884PMACHT402JMD100JVM-210H4100
Rating
Price 656.00 incl. GR VAT 696.00 incl. GR VAT 313.42 incl. GR VAT 688.99 incl. GR VAT 1,240.00 incl. GR VAT 1,418.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

In stock

Only 1 left in stock (can be backordered)

In stock

AvailabilityIn stockAvailable on backorderAvailable on backorderIn stockOnly 1 left in stock (can be backordered)In stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The LH offers the epitome of valve tone and live versatility. A reliable, gig ready head and cab combination with all of the sounds and features required to cover genres from Country to Metal.

The LH50 head offers independent Gain and Drive controls on each of itʼs two channels giving the player maximum tonal flexibility for a variety of performance styles.

Each of the LH50ʼs twin channels features their own dedicated drive control, three band EQ, plus global Reverb and overall Tone control.

The benefit of having a Gain on both channels is that even if you want to set one channel up clean you have the ability to add a little drive to it giving you that luxurious gently pushed valve amp sound. No need for a pedal in the front end! Wind the other channel up and hit it hard and the amp sings, rich with harmonics and defiantly screaming its heart out.

On the far right lies the master tone control. This is a very cool idea indeed and acts a lot like your guitars tone pot. This makes for some serious tonal tomfoolery.

The rear panel of the LH50 features an FX loop and the external speaker sockets.

 

Power: 50 Watt
Channels: 2
Equalizer: Yes (Bass, Middle & Treble_
Inputs: FX Loop(s), Hi & Lo Jacks
Outputs: Footswitch, Speaker connections
Effects: Reverb, overall Tone control
Valves: Premium EL34
Foot-switch: FS2 (Not included)
Controls: Gain, 3 Band EQ/ each channel
FX Loop: Yes
Dimensions ( W x H x D ): 556 x 246 x 262
Weight: 14 Kg

 

Ultimate Rock Tone 120-Watt 2-Channel Tube Amplifier Head with Reverb and INFINIUM Tube Life Multiplier

  • Hand-built 120-Watt amplifier driven by 4 x 6L6 tubes (convertible to EL34)
  • 2-channel preamp design (Clean/Crunch, Lead) featuring 6 x 12AX7 tubes for thick and screaming hi-gain
  • Revolutionary INFINIUM Tube Life Multiplier technology:
    • Extends the life of your amplifierʼs expensive power tubes up to 20 times
    • Provides incredible reliability and consistent tone over the complete lifespan of your tubes
    • No need for expensive matched tube sets
    • Allows you to mix and match any combination of compatible tube types and brands
    • Monitors performance of each power tube continuously and displays defective tubes to allow for easy and individual replacement
  • Integrated high-class reverb with dedicated Reverb control for each channel
  • Independent Equalizer sections for each channel with dedicated Bass, Mid and Treble controls
  • Classic Presence control per channel for efficient midrange sound shaping
  • Heavy-duty footswitch for Channel selection and FX Loop function included
  • Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
  • High-quality components and exceptionally rugged construction ensure long life

 

The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.

Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.

  • Product type: Amplifier
  • Type: 2-channel
  • Output power (1 kHz 4 ohms): 2 x 200 W
  • Output power (1 kHz 8 ohms): 2 x 100 W
  • Output power (1 kHz 8 ohms, bridged mode): 400 W
  • Circuit concept: Class D dynamic
  • Frequency response: 20 - 20,000 Hz
  • THD:
  • Voltage gain: 32 dB / 26 dB / 28 dB
  • Input sensitivity: 0.68 V / 1.4 V / 1.2 V
  • Protection: Soft-start, short-circuit, DC, overheating, overvoltage
  • Controls: On/Off, Volume, High, Low, Mode (bridge / parallel / stereo), Ground Lift, Limiter, sensitivity
  • Indicators: Power, Signal, Clip, Protect, Mode (bridge / parallel)
  • Line input connectors: 2 x XLR, 2 x 6.3 mm jack
  • Speaker output connections: 2 x Speakon-compatible, 3 x 6,3mm jack
  • Cooling System: low-noise fan
  • Power supply: switching power supply
  • Power Consumption Full Load: 470 W
  • Operating voltage: 115 V AC / 230 V AC (switchable)
  • Width: 482 mm
  • Height: 44 mm
  • Depth: 244 mm

 

100W HEAD guitar amplifier, 4 channels with digital Pre-amp & 4xEL34 Power Amp valves, 4 Modulation effects, 3 Delay effects, reverb. Footcontroller included.

Features
  • Power rating: 100W
  • Preamp: Digital Natural Harmonic Technology
  • Power amp tubes: 4 x EL34
  • Preamp topologies: 16
  • Modulation effects: Chorus, Phaser, Flanger, Tremolo
  • Delay effects: Hi-Fi Analog, Tape, Multi
  • Reverb: Independent custom voiced
  • Midi Control: Midi in, Midi Thru
  • Stompware controller: supplied
  • Emulated line out: XLR
  • Headphone out: 1/4" jack
  • Line in: 1/4" jack
  • Preamp: 1/4" jack
  • Effects loop: Serial / Parallel -10dBV / +4dB with mix control
  • Speaker output: 1x16 Ohm, 1x8 Ohm, 2x 16 Ohm
The JVM Series from Marshall is the most comprehensive range of professional, all-valve amplifiers ever offered. No other multi-channel, multi-mode amplifier delivers the amazing all-valve tone offered by the JVM at any price. Multiple, all-valve voicings provide an amazing array of tones which are accessible from the front-panel switches, MIDI or via the revolutionary technology of the supplied footswitch. Hailed as a breakthrough in amplification by the worldʼs guitar press, the JVM Series offers a powerstage built on the peerless EL34 designs responsible for the legendary Marshall roar. Outstanding Tone The JVM Series uses a carefully designed, 4 x ECC83 pre-amp stage to generate the desired amount of gain, from the cleanest, yet complex, clean imaginable to a vast palette of overdrives that range from sophisticated and subtle to explosive and extreme. Boasting a truly amazing array of instantly switchable sounds, overflowing with harmonically rich tones and responsive fluidity, every JVM mode exudes that unmistakable Marshall sound and expands on it, effectively offering multiple Marshalls in one easy-to-use package. Ultimate Flexibility Each totally independent JVM channel offers three footswitchable modes which progressively add gain while offering a complimentary tonal topology, making the JVM the perfect amplifier for any situation. Seamless, Silent Switching Ultimate Control and Connectivity Every JVM is supplied with a fully programmable footswitch. This revolutionary, patent-pending technology allows single front panel switching (SWITCH STORE) or entire set-ups (PRESET STORE – Channel/Mode, Reverb, FX Loop, Master Volume) to be simply assigned to any footswitch . . . or, even cooler, a mix ʽnʼ match of both modes. Housed in a rugged metal casing with blank panels on its surface which allow the user to label the pedal exactly as they want, the JVM pedal has no restrictive factory set-ups or functionality barriers, plus itʼs a breeze to program. The multi-coloured LEDs reflect every front panel switch status so you know exactly where you are, in the heat of a performance, without the need to glance at the amplifier itself. The JVMʼs MIDI In and Thru connection means it can easily be integrated in a MIDI switching set-up, allowing you to store and recall 128 amplifier set-ups and enabling your MIDI effects board to easily control the amp. With its built-in memory and switching options the possibilities are endless! Studio-Quality Reverb Effective Control Each JVM boasts two FX Loops that live on its rear panel. A footswitchable Parallel/Series Loop with Level and Mix controls plus a Series Loop with a Bypass switch. Combine the JVM with a MIDI FX processor and a MIDI footswitch and the skyʼs the limit! The Tone of the Cone In the case of the 2x12 in. JVM combos, after exhaustive testing of every speaker available, all agreed that the pairing of a Marshall/Celestion ʽHeritageʼ with a Marshall/Celestion ʽVintageʼ was the only way to go as the combination produces a fantastic depth and breadth of sound while maintaining a tight, musical response and a solid low-end thump. In the case of the 50 Watt 1x12”combo, a Celestion G12B delivers a full, wide sound that is much "bigger” than the JVM215Cʼs compact size would suggest. Every JVM is made at the Marshall factory in the heart of England. Time-tested craftsmanship and construction are combined with the latest advances in manufacturing technology, ensuring world-class build quality and roadworthiness. Internally, the JVM circuitry and layout has been kept as simple and logical as possible, ensuring the integrity of the guitar tone and an incredibly low noise-floor for such a high gain beast. Four, double-sided PCBs are used and connections are kept to a minimum to ensure maximum reliability. Only the best components are used to ensure very high quality and all of the internal wiring and amplifier assembly is performed by hand. Strict quality controls ensure every unit made is worthy of the world-renowned and respected white script Marshall logo. Meticulous valve selection adds further to the all-important tone and reliability that are both synonymous with the Marshall legend. Technical Info Output (RMS): 100 Watts Speakers: No Pre-amp Valves: 4 x ECC83 Power Amp Valves: 1 x ECC83, 4 x EL34 Footswitch (Supplied): PEDL-00045 Dimensions (Millimeters): 750 x 310 x 215 Weight: 22 kg, 48.5 lbs

Marshall 4100 100W Guitar Amplifier


Marshall 4100
With 4 - 5881 output tubes for 100W of room-shaking power, this head is made for nonstop heavy rockin?.




For total control, the 4100 has 2 channels, each with separate Gain, Master Volume, and Reverb controls. Channel A is voiced for anything from shimmering clean to raw crunch reminiscent of a JTM45. Channel B picks up where normal boost channels quit, generating supercharged distortion and ringing sustain. Other great features include 4-band rotary EQ, adjustable effects loop, and both normal and cab effect direct outs.
Weight14.00 kg3.00 kg4.00 kg20.00 kg22.00 kg18.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 14.00 kg
Weight 3.00 kg
Weight 4.00 kg
Weight 20.00 kg
Guitar Amp Watts

Weight 22.00 kg
Guitar Amp Watts

Weight 18.80 kg
Guitar Amp Watts