Content | The LH offers the epitome of valve tone and live versatility. A reliable, gig ready head and cab combination with all of the sounds and features required to cover genres from Country to Metal.
The LH50 head offers independent Gain and Drive controls on each of itʼs two channels giving the player maximum tonal flexibility for a variety of performance styles.
Each of the LH50ʼs twin channels features their own dedicated drive control, three band EQ, plus global Reverb and overall Tone control.
The benefit of having a Gain on both channels is that even if you want to set one channel up clean you have the ability to add a little drive to it giving you that luxurious gently pushed valve amp sound. No need for a pedal in the front end! Wind the other channel up and hit it hard and the amp sings, rich with harmonics and defiantly screaming its heart out.
On the far right lies the master tone control. This is a very cool idea indeed and acts a lot like your guitars tone pot. This makes for some serious tonal tomfoolery.
The rear panel of the LH50 features an FX loop and the external speaker sockets.
Power: |
50 Watt |
Channels: |
2 |
Equalizer: |
Yes (Bass, Middle & Treble_ |
Inputs: |
FX Loop(s), Hi & Lo Jacks |
Outputs: |
Footswitch, Speaker connections |
Effects: |
Reverb, overall Tone control |
Valves: |
Premium EL34 |
Foot-switch: |
FS2 (Not included) |
Controls: |
Gain, 3 Band EQ/ each channel |
FX Loop: |
Yes |
Dimensions ( W x H x D ): |
556 x 246 x 262 |
Weight: |
14 Kg |
|
Marshall 2203-01 100W Guitar Amplifier
The all-valve JCM800 2203 is one of the most highly respected 100 Watt
Marshall heads in the company's long history.Evolving from the legendary
100 Watt 'Plexi' head,it was one of our first amplifiers to feature a Master
Volume(MV) Control.
The very essence of simplicity,the JCM800 2203 is a one channel,all-valve
amp with no reverb or built-in effects.Its foolproof interface,distinctive roar
and larger-than-life 'edge' immediately set the standard by which all other
rock amps were judged and it remained the 'industry benchmark' throughout
the entire 16 years of its production life.Now it's back by popular demand and
as with the 1959SLP and 1987X we've added a Series Effects Loop featuring
a true bypass switch that takes the loop completely out of the circuit,thus
ensuring the original tone isn't compromised in any shape or form.
|
The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.
Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.
- Product type: Amplifier
- Type: 2-channel
- Output power (1 kHz 4 ohms): 2 x 200 W
- Output power (1 kHz 8 ohms): 2 x 100 W
- Output power (1 kHz 8 ohms, bridged mode): 400 W
- Circuit concept: Class D dynamic
- Frequency response: 20 - 20,000 Hz
- THD:
- Voltage gain: 32 dB / 26 dB / 28 dB
- Input sensitivity: 0.68 V / 1.4 V / 1.2 V
- Protection: Soft-start, short-circuit, DC, overheating, overvoltage
- Controls: On/Off, Volume, High, Low, Mode (bridge / parallel / stereo), Ground Lift, Limiter, sensitivity
- Indicators: Power, Signal, Clip, Protect, Mode (bridge / parallel)
- Line input connectors: 2 x XLR, 2 x 6.3 mm jack
- Speaker output connections: 2 x Speakon-compatible, 3 x 6,3mm jack
- Cooling System: low-noise fan
- Power supply: switching power supply
- Power Consumption Full Load: 470 W
- Operating voltage: 115 V AC / 230 V AC (switchable)
- Width: 482 mm
- Height: 44 mm
- Depth: 244 mm
|
The Marshall 2061X 20W Amp Head is a hand-wired reissue of the model 2061, a "Lead and Bass" head originally produced from 1967 to 1973. With 20W of power, it churned out golden crunchy tones with depth and character. The Marshall 2061X comes with 2 EL84 tubes in the power amp, 2 ECC83s in the preamp, and a solid state rectifier.
Marshall 2061X Handwired 20W Amp Head Features:
- Hand-wired reissue of the 2061 "Lead and Bass" head
- 20W
- 2 EL84 tubes in the power amp
- 2 ECC83s in the preamp
- Solid state rectifier
| EVOLUTION: No compromise, ultra low end, versatile ROCK/METAL amp. 4 channels lead to where no ENGL amp has gone before. The Sonic Evolution of ENGL sounds, from crystal clean to crispy crunch n tight fat rhythm to punchy lead sounds in conjunction with low bottom end to satisfy the needs of the modern guitarist. Rich harmonics and fast attack delivered by special built transformers to cut through on any stage or recording situation. | Building on the overwhelming success of our acclaimed Dark Terror and Dual Dark amps, weʼve distilled thousands of customer demands into a pint-sized valve hybrid head – the Micro Dark. The Micro Dark shares the same intuitive Shape control combined with a new 12AX7-driven high gain preamp section which yields screaming dirty tones that make a mockery of its miniature frame. Like its bigger brothers, however, the Micro Darkʼs smoky black chassis and simple layout actually disguises its cunning versatility.
Of course, thereʼs plenty of gain on tap to satisfy even the most discerning devotee of distortion, but this little beast is by no means just a one-trick Metal monster! Beneath the menacing exterior youʼll find a rich and diverse pallette of classy and confident tones. From squeaky clean to brash and mean – whatever your style – youʼre gonna love this thing.
Other features include a transparent fully buffered effects loop and a headphone output with our popular CabSim circuitry. With the optional PPC108 cabinet, the Micro is an ideal practice rig… Plug into something a little larger, though, and you might find your new secret weapon in the studio! |
Reviews
There are no reviews yet.