LANEY LX-65R with Reverb Amplifier for Electric Guitar

Supercharged to befit the name: The Valvetronix Pro Series. Introducing the new VTX150 Neodymium - the pinnacle of VOX modeling amps.

Main Features

• VTX150 Neodymium features
• Valvetronix Pro Series - the perfect fusion of real tube tone and VOX modeling technology
• Next-generation VOX Valve Reactor circuit features an EL84 Vacuum tube
• 132 Expertly voiced presets
  • 44 Song Presets: spot-on recreations of the sounds used on classic tracks
  • 44 Basic Amp Model Presets: Valvetronix amp modeling at its robust finest
  • 44 Effected Amp Model Presets: created with chorus, flanger and tremolo effects
• 44 Distinct amp models - the most in any Valvetronix amp
  • Accurate amp models encompass the entire VOX lineage from the traditional AC30 to the modern Night Train, plus an impressive list of other hard-to-come-by classics and rare hi-gain boutique models
• 25 In-demand, top-quality effects
  • 11 Pedal-type effects
  • 11 Modulation (chorus, flanger, etc.)/Delay effects with Tap Tempo control
  • 3 Reverb styles
• 8 User Programs for saving your custom settings (expandable to 16 using the VC12SV)
• Manual mode relies on the physical knob settings of the amp section
• Amp offers Gain, Volume, and Master Volume; EQ features Treble, Middle, and Bass
• Unique Power Level control can limit the power amp output wattage, creating distinctive power amp distortion at any listening level
• Built-in automatic guitar tuner
• Power level control allows you to adjust the output wattage of the power amp
• Celestion VOX NeoDog neodymium 12" speaker
  • Powerful neodymium magnets generate volume levels unimaginable from a compact 150W combo amp
• Extension speaker output jack
  • Connect any speaker cabinet (150W / 8Ω) to obtain up to 300W of output power
• Effects Loop for use with an external effects processor
• AUX IN jack lets you connect your CD/MP3 player and enjoy jam sessions
• Headphone output simulates the acoustic and spatial character of a full speaker cabinet
• Optional VC-12SV foot controller (or VFS5) foot switch can control many of the VTX150 Neodymium's functions

• Number of amp models: 44
• Number of effects: 25 + Noise reduction
• Number of programs
  • Preset: 132
  • User: 8 (2 banks x 4 channels) *when using VC-12SV: 16 (4 banks x 4 channels)
• Input/output jacks
• Top panel: INPUT jack, PHONES jack, AUX IN jack
• Rear panel: FOOT SW jack, VOX Bus, Effect loop send/return
• Power amp output:
  • maximum 150 W RMS @ 8 ohms (only the VTX150 Neodymium),
  • *maximum 300 W RMS @ 4 ohms (when using an extension speaker)
• Speaker: Celestion Vox NeoDog neodymium speaker; 12" / 8 Ω (x1)
• Signal processing: A/D conversion: 24-bit  D/A conversion: 24-bit
• Power supply requirements: AC, local voltage
• Power consumption: 83W
• Dimensions (W x D x H): 451 x 261 x 438 mm / 17.76 x 10.28 x 17.24 inches
• Weight: 12.1 kg / 26.68 lbs.
• Included items: Power cable
• Options (sold separately): Foot controller (VOX VC-12SV), Foot switch (VOX VFS5)

Those instantly recognizable, warm British sounds you've come to expect from VOX are alive and well in the compact, 10-Watt Pathfinder 10 combo - plus a high gain capability that's thoroughly modern!

This 10-Watt, 1 x 6.5" combo's eye-catching looks are also classic VOX and include basket-weave, leather-look vinyl, our distinctive diamond grille cloth and, of course, chicken head knobs! Small but all-important details such as gold beading and white piping have also been faithfully reproduced, perfectly recapturing the legendary look of VOX.

Little Yet Loud!
The Pathfinder 10's powerful yet always tone-filled 10-Watt output, makes this amp perfect for home practice, backstage warm-up and recording. The Clean/Overdrive switch allows you to change instantly between clean and dirty sounds. With a mere press of this switch you can go from a crystal clear clean sound to our uniquely warm distortion; or from a slightly crunchy bluesy tone to a high-gain, modern-rock roar.

Headphone/Lineout jack
Want to practice late at night without disturbing your neighbours? No problem! Just plug your headphones into the Headphone/Line Out jack and away you go - your sleeping neighbours won't hear a thing because using this jack automatically mutes the amp's speaker! This jack also doubles as a specially filtered Line Out which is perfect for recording your amp without having to worry about setting up any pesky microphones. The Pathfinder 10 also features controls for Gain, Treble, Bass and Volume plus a Clean/Overdrive switch.

• Input Jacks. This, believe it or not, is where you plug your guitar into the amp!
• Gain Control. This adjusts the overall preamp gain of the amplifier. This control can produce a wide variety of killer tones - from clean to crunchy to crazy and all points in-between! What you get all depends on how you set this control and also how you have the Clean/Overdrive Switch (3) set. In both Switch modes - Clean & Overdrive - turning the Gain control down (i.e. counter clockwise) will clean up your sound while cranking it up (i.e. turning it clockwise) will dirty things up. The possibilities are endless.
• Clean/Overdrive Switch. As its name suggests, this switch puts the preamp of the Pathfinder 10 in one of two distinctly different modes -Clean (switch "out“) or Overdrive (switch "in“). And, as you'd expect, the Overdrive mode has bags more gain than the Clean mode. So, if you want more gain just press this button in and let rip!
• Treble Control. This adjusts the treble (high) frequencies in your tone. It can take your sound from soft and round, to bright and cutting, and any point in-between.
• Bass Control. This adjusts the bass (low) frequencies in your tone. It can take your sound from warm and light, to dark and heavy and any point in-between.
• Volume Control. This determines the overall volume of the amplifier. Setting this control high while keeping the Gain low works well for clean sounds (HINT: make sure the Clean/Overdrive Switch is "out" if you wanna go clean!), while setting the Master Volume lower, engaging the Overdrive mode and turning up the Gain will give you a fat, distorted sound at a lower, "bedroom friendly" volume.
• Headphone/Line Out Jack. This dual output carries a specially filtered signal for use with either headphones or for direct connection to a soundboard or recording console. The LINE OUT gives you a good sounding signal for recording or live work without having to mic up the amp. Inserting a jack-plug into this jack will mute the internal speaker.
• Power ON/OFF Switch & LED. On/Off switch for mains (AC) power to amplifier. Plus power indicator LED.

• Circuitry: Solid-State
• Output: 10-Watts RMS
• Speakers: Vox Bulldog x 1 (6.5“, 8 ohm)
• Controls: Gain, Treble, Bass, Volume, Clean/Overdrive Switch, Power On/Off
• Input: Input Jack
• Outputs: Headphone/Line Out Jack
• Dimensions: 380mm(w) x 260mm(h) x 170mm(d) / 14.96“(w) x 10.24“(h) x 6.69“(d)
• Weight: 4.8Kg/10lbs

 * 30-watt, 2x12" combo guitar amplifier
    * Two channels with independent volume controls — Normal and Top Boost
    * Reverb and Tremolo effects onboard (controllable via optional footswitch)
    * Master volume section with Tone Cut and Volume controls
    * True bypass effects loop for bringing in your own pedals
    * Switchable 8-/16-ohm output jack for external speakers (mutes internal speakers)
    * 16-ohm output jack for running a cabinet along with the internal speakers
    * Features two 12" 8-ohm Celestion G12M Greenback speakers
    * Uses 3 x 12AX7 preamp tubes and 4 x EL84 power tubes
    * Dimensions (W x D x H): 27.64" x 10.43" x 21.89“
    * Weight: 70.99 lbs.

From as clean as you please to as dirty and growly as you want it! We ain't kiddin' neither!
The possibilities are endless with this little guy. This JVM has 2 independent channels with 3 gain stages. A smart footswitch that remembers your settings...great for playing live! There are 2 master volumes that can be recalled by the footswitch as well. The reverb sounds incredible...it really does. Emulated XLR out for recording. You can dial into any sound you desire with this amp. 2 effects loops. You get it all with a Marshall JVM
Marshall JVM 205C Specs:

100W power
All-valve, with 5 x ECC83s, and 4 x EL34s
1x Vintage 12" + 1x Heritage 12" Speaker
2 totally independent, footswitchable channels
Each channel has 3 footswitchable modes (clean,crunch & overdrive)
Footswitchable, studio-quality digital reverb
Independent reverb controls for each channel
2 footswitchable master volumes
2 FX loops, one series, and one parallel
Parallel FX loop is footswitchable on/off
Speaker emulated XLR output
4-way footswitch (with memory) supplied
All switching can be done via MIDI
Made in England