| Content | NEXUS cabinets house state of the art Celestion Neodymium drivers which provide massive sound pressure levels without the weight normally associated with great bass tone.
Features
- Power RMS 800 Watts (8 ohms)
- Inputs 2x Speakon/Jack combi socket
- Impedance 8 ohms
- Drivers 4x 10' Celestion Neodymium
- Baffle Marine Grade Plywood
- Castors No Cabinet Design Marine Grade plywood cabinet with large grip handles, and kick proof metal grille
- Ports Front
- Kick Proof Metal Grill Yes
- Weight 27.5 Kg
- Dimensions Width 643 x Height 643 x Depth 403
| Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:
- Front-mounted speakers
- Detachable grill
- Solid workmanship
- Speaker mount and quality check carried out in Germany
- Cabinet impedance (Mono): 8
- Cabinet impedance (Stereo): 16/Speaker
- Power Rating (Mono): 120 W
- Power Rating (Stereo): 60/Speaker
- Cabinet weight without speakers: 15,6 kg
- Back: Closed
- Dimensions (WxDxH): 48x71x29 cm
- Front Grill: Fabric, detachable
- Speaker Mounting: 2 x 12" front mounted
Vintage 30
Back in 1986 a new breed of hard rock player was on the rise. To meet the demands of the players and their increasingly ʽhot-roddedʼ amplifiers, we set out to develop a modern speaker, capable of handling much more power and overdrive. To achieve this, we coupled our ʽHʼ magnet (the closest in performance to Alnico) with a new cone and voice coil employing contemporary materials.
Our most revealing speaker, the Vintage 30 features enormously detailed and complex overtones, a warm low-end, a famously rich vocal mid-range and a beautifully detailed top-end. Used singly to reveal the complexities in hand-wired boutique amps, or in quartets for a wonderfully intricate vintage 3D crunch, the Vintage 30 sound has been captured on thousands of recordings from a diverse range of notable players including Slash, Steve Stevens and Peter Frampton.
Specifications
- Nominal diameter: 12“, 305 mm
- Power Rating: 60 W
- Nominal impedance: 8 ohms
- Sensitivity: 100 dB
- Chassis type: Pressed steel
- Voice coil diameter: 1,75“, 44,5 mm
- Voice coil material: Round copper
- Magnet type: Ceramic
- Magnet weight: 50 oz, 1,42 kg
- Frequency range: 70 - 5000 Hz
- Resonance frequency, Fs: 75 Hz
- DC resistance, Re: 7,3 ohms
| Info
The lower cost MX212, 2 x 12'' cab can be used with most Marshall heads, or as an extension cab for a 2 x 12'' combo, which adds great flexibility to your setup. This mono cab, covered in Marshall Tolex, featuring the iconic Marshall baffle logo is loaded with Celestion Seventy 80 speakers. |
Marshall 1960BV 300W 4x12'' Guitar Speaker Cabinet
Nothing personifies the image of rock 'n' roll more completely than a wall of Marshall stacks. Though often imitated, nothing compares to the original. The 1960BV is the straight version that features 4 Marshall/Celestion Vintage speakers and is the perfect addition to your stage or recording rig! It's ideal for players who appreciate a lot of low end, without all the boomyness.
Marshall 1960BV at a Glance:
- Incredibly flexible 4x12 straight cab
- Low End That Never Gets Boomy
- Slightly brighter sound than a straight cab
- Sonically speaking, nothing compares to a Marshall amp
- Rugged and ready for the road
The Ultimate in Flexibility
To ensure the ultimate in flexibility, the 1960A (angled) and the 1960B (straight), is switchable between Mono (4 or 16 Ohms) and Stereo (8 Ohms per side). The two Mono impedance options provide extra amp matching capability while the cabinets' stereo capability makes them ideal for rack systems which typically run in stereo.
Low End That Never Gets Boomy
This has a thicker, warmer sound than the 1960A with a fat, well-defined midrange and a rounded high end that sparkles nicely while not being overly bright. It also has a good low end "chunk" which never gets "boomy.“
Offers That Low-End Thump
B (Base) cabinets offer some sonic differences. A straight cab sounds more focused and has more low-end thump. The additional size gives the cabinet a lower resonant frequency for more low-end. All speakers facing the same direction gives a more focused sound. Many players prefer to use only the B cabs, even when they are on stage with a full stack. Zakk Wylde (Ozzy's guitarist) uses only the B cabs because of the tighter low end and because (believe it or not) he values his hearing and the sound from the B cab doesn't hit him directly in the head.
Sonically Superior
The only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4x12 cabs are indeed rock and roll history in a stack!
Ready For Your Gig - Wherever That Might Be!
Roadworthiness is a vital prerequisite in the world of relentless touring and as Marshall's 40 years of cabinet building attests, Marshall cabinets are definitely built to stand the test of time! Their highly skilled craftsmen construct these 4x12s from the finest materials available - 15mm birch plywood with precision 'finger locked' (comb) joints, tough cotton backed PVC covering, heavy duty hardware and the highest quality fittings.
Weighing in at around 80 lbs, the JCM1960BV is made of 15mm birch plywood (except for the back panel, which is medium density fiberboard) and built for tone, projection, and durability. The majority of cabinet construction is done by hand.
Marshall 1960BV Features:
- 300W 4x12 straight 4/16 ohm, mono; 8 ohm stereo.
- The extra warm sounding Marshall/Celestion "Vintage" speaker - rated at 70 watts each - (1960BV/BV)
- Black grille cloth / white piping
- Large white logo
- Black elephant grain vinyl
| Info
150W 2x12" Mono / 75W + 75W Stereo Cabinet. |
1960A JOE SATRIANI SIGNATURE CAB The Marshall 1960A JSB Joe Satriani Speaker Cabinet is an external speaker cabinet to match the JVM410HJSB Head, offering 300 watts of power. The Marshall 1960A Joe Satriani has been made to Joe's specifications and preferences, featuring four 12 inch Celestion 75 watt speakers, housed in a rugged, special blue colour chassis.
Features/Specifications: 1960AJSB:
- Type: Speaker Cabinet
- Output (RMS): 300 Watt
- Speakers: 4 x 12" Celestion 75 speaker
- Impedance: 16/4 Ohm Impedance (Mono)/8 Ohm Impedance (Stereo)
- Dimensions (mm): 760 x 830 x 365
- Weight (kg): 36.4Kg
|
Reviews
There are no reviews yet.