LD Systems ANNY 10 HBH 2 B6 10″ Portable battery-powered Bluetooth PA System with mixer

Original price was: €1,169.73.Current price is: €1,005.00. incl. GR VAT

Available on backorder

EAN: 4049521883880
Installments calculation
CompareAdd to wishlist Submit Better Price

System with mixer, 1x wireless handheld and 1x headset microphone (incl. bodypack)

System with mixer, 1x wireless handheld and 1x headset microphone (incl. bodypack)

 

Read more

General
Product type
Battery-powered PA speaker
Type
Set (1x ANNY 10, 2x receiver, 1x handheld microphone, 1x bodypack, 1x headset)
Frequency range
655 – 679 MHz
Weight
18,625 kg
Items in this set
LD Systems ANNY® 10 10″ Portable battery-powered Bluetooth® PA System with mixer
Product type
Battery-powered PA speaker
Type
Powered
Color
Black
Channels
6 channels
System output (RMS)
80 W
System output (Peak)
160 W
Max. SPL Average (Sine burst)
111 dB
Max. SPL Peak (Sine burst)
118 dB
Frequency response (-10dB)
45 Hz – 20 kHz
Crossover frequency
1800 Hz
Dispersion (H x V)
120° x 60 °
Total Height
566 mm
Features
3-band EQ, effects (reverb & delay), 6-channel mixer with system presets, Priority/ducking mode, TWS, USB-C port für mobile device charging
Low/mid woofer:
Woofer dimensions
10 “
Woofer dimensions (mm)
254 mm
Width
361 mm
Woofer magnet
Ferrite
Depth
300 mm
Woofer brand
Custom-made
Woofer voice coil (inch)
2 “
Controls
effect, Input 1 Mic/Line switch, Input 1 volume, Input 2 Mic/Line switch, Input 2 volume, Input 3+4 volume, Input 5+6 (Bluetooth) volume, Main volume / menu navigation, Power
Woofer voice coil (mm)
51 mm
Indicators
multifunction LC display, power/battery status
Cabinet construction
Bass Reflex
Housing material
Polypropylene
Weight
18 kg
HF driver:
Horn
Constant directivity
Tweeter dimensions
1 “
Tweeter dimensions (mm)
25 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Tweeter voice coil
1 “
Tweeter voice coil (mm)
25 mm
Amplifier module (integrated):
Amplifier
Class D
Protection circuits
Short circuit, thermal overload
Ambient temperature (operating)
0°C – 40 °C
Relative Humidity
0 – 80% (non condensing)
Fuse
T2 AL 250V
Mains connector
IEC
Operating voltage
100 V AC – 240 V AC, 50 – 60 Hz
Power consumption
150 W
Physical inputs
5
Physical input connectors
2 x 6.3 mm / XLR combo, 2 x RCA, 3.5 mm jack
Mix output
1
Mix output connector
XLR male
Bluetooth Standard
5.0
Bluetooth Audio Decoder
AAC, SBC
Rechargeable battery:
Rechargable batteries
2 x 12V / 5000mAh
Battery technology
Lead Acid
Battery life music (MUSIC, full volume)
5 Hours
Battery life music (ECO, mid volume)
25 Hours
Charging time (80%, no signal)
3.5 hours
Charging time (full recharge)
7 hours (no signal)
LD Systems ANNY® R B6 Receiver Module for ANNY®
Product type
Battery-powered PA speaker accessories
Type
Receivers
Modulation Type
FM
Transmission frequency range
655 – 679 MHz
Channels
12
Frequency response
50 Hz – 17 kHz
Controls
Mute Level (Squelch), Power / Volume, SYNC, Value Down, Value Up
Indicators
AF (audio signal), LED Display, RF (radio signal)
Connectors
Audio outputs, BNC-Antenna
Weight
0,08 kg
LD Systems ANNY® BP B6 Bodypack Transmitter for ANNY®
Product type
Battery-powered PA speaker accessories
Type
Bodypack
Transmission frequency range
655 – 679 MHz
Channels
12
Inputs
Mini-XLR (3-pin)
Signal-to-noise ratio
100 dB
Frequency response
45 Hz – 20 kHz
Rated HF output power
10 mW
Power supply
2 x AA battery
Operating time
>8 h (with alkaline batteries)
Width
64 mm
Height
100 mm
Depth
21 mm
Controls
Gain (3-stage input sensitivity), Power On/Off, standby
Indicators
battery status LED (low), Power
Other features
incl. batteries, IR frequency synchronisation, standby, switchable gain
Weight
0,09 kg
LD Systems ANNY® MD B6 Wireless Handheld Microphone for ANNY®
Product type
Battery-powered PA speaker accessories
Type
Microphones
Transmission frequency range
655 – 679 MHz
Channels
12
Directivity
Cardioid
Microphone type
Dynamic
Signal-to-noise ratio
104 dB
Frequency response
60 Hz – 20 kHz
Rated HF output power
10 mW
Power supply
2 x AA battery
Operating time
>8 h (with alkaline batteries)
Length
250.4 mm
Diameter
32.5 mm
Controls
Power On/Off
Other features
incl. batteries, IR frequency synchronisation
Indicators
power/battery status low (LED)
Weight
0,2 kg
LD Systems WS 100 MH 1 Headset microphone, black
Product type
Wireless Microphone System Accessories
Type
Headsets
Directivity
Cardioid
Nominal impedance
680 Ohm(s)
Frequency response
100 Hz – 12 KHz
Phantom power requierements
5 V
Microphone input
Mini-XLR (3-pin, female)
Cable length
1 m
Accessories (included)
Foam windscreen
Weight
0,049 kg
  • Portable active 2-way full-range loudspeaker
  • Built-in 6-channel mixer with 3-band EQ, reverb and delay
  • Long battery life: up to 25h (ECO mode) / 5h (max. volume)
  • 1x wireless handheld and 1x headset microphone with bodypack transmitter incl. AA batteries
  • Bluetooth® 5.0 and stereo streaming (TWS) with two ANNYs
  • Clear and distortion-free sound at maximum volume through DynX® DSP (Gen. 2)
  • 2x microphone/line inputs for versatile connection options
  • 1x stereo channel with 3.5mm jack (AUX) or RCA
  • Priority/ducking mode to emphasise the microphone signal
  • Wheels and telescopic handle for easy transport
  • 35-mm flange for use with a speaker stand
  • USB-C port for charging a tablet or smartphone
  • Footswitch input for hands-free effect control
  • Integrated holder for tablet or smartphone
Weight 18.8 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems ANNY 10 HBH 2 B6 10″ Portable battery-powered Bluetooth PA System with mixer”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems ANNY 10 HBH 2 B6 10" Portable battery-powered Bluetooth PA System with mixer removeLD SYSTEMS MAILA COL 4x6.5" Powered Column Speaker + Power Amplifier For Up To Eight Satellites removeHK Audio Polar 8 Active High-Performance Column PA System 300Wrms with Bluetooth removeLD Systems DAVE 8 ROADIE Portable active PA system with 3-Channel mixer removeLD Systems DAVE 15 G3 Compact 15" active PA System 2800W Peak power removeLD SYSTEMS MAUI® 28 G3 Compact Cardioid Column PA System, Black 2060 W Peak-Power 127 dB max. SPL remove
NameLD Systems ANNY 10 HBH 2 B6 10" Portable battery-powered Bluetooth PA System with mixer removeLD SYSTEMS MAILA COL 4x6.5" Powered Column Speaker + Power Amplifier For Up To Eight Satellites removeHK Audio Polar 8 Active High-Performance Column PA System 300Wrms with Bluetooth removeLD Systems DAVE 8 ROADIE Portable active PA system with 3-Channel mixer removeLD Systems DAVE 15 G3 Compact 15" active PA System 2800W Peak power removeLD SYSTEMS MAUI® 28 G3 Compact Cardioid Column PA System, Black 2060 W Peak-Power 127 dB max. SPL remove
ImageLD Systems ANNY 10 HBH 2 B6 10 Portable battery-powered Bluetooth PA System with mixerLD SYSTEMS MAILA POWERD COLUMNHK Audio POLAR 10 Active High-Performance Column PA System 300Wrms with BluetoothLDMAUI28G3_1
SKULDANNY10HBH2B6LDMAILACOLhkpolar8LDDAVE8ROADIELDDAVE15G3MAUI28G3
Rating
Price Original price was: €1,169.73.Current price is: €1,005.00. incl. GR VATCall for Price Original price was: €900.00.Current price is: €688.00. incl. GR VAT Original price was: €696.07.Current price is: €598.99. incl. GR VAT Original price was: €1,467.48.Current price is: €1,240.00. incl. GR VAT1,500.40 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Call for Price

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionSystem with mixer, 1x wireless handheld and 1x headset microphone (incl. bodypack)
  • Powered column module with integrated loudspeakers and DSP power amplifier
  • 4x 6.5'' woofers for extended low-mid headroom
  • 4-channel DSP amplifier with SysCore® DSP and 2.5 kW total output power
  • Frequency range: 105 - 500 Hz
  • Flexible use in ground stack and flown setups
  • SmartLink+® enables cable-free connection of column module and satellites (powering up to eight MAILA SAT)
  • LogoLink®: Wireless antennas integrated in the LD logo for wireless app connection
  • DSP configuration directly on the device or via the free MAILA app (iPadOS)
  • 2060 W Peak-power and 127 dB max. SPL
  • Powerful and deep bass reproduction with 12" subwoofer
  • Balanced mids thanks to 12 x 3.5" full-range speakers
  • Precise and silky highs with 2 x 1" high-frequency drivers
  • Cardioid column for controlled low-mid and midrange sound dispersion
  • BEM optimised HF waveguide and midrange phase plugs for homogeneous dispersion
  • Optimised bass-reflex design improves bass response and reduces air flow noise
  • Can be combined with an additional MAUI® 28 G3 subwoofer for increased low end or for cardioid subwoofer setups
  • New Dynx® DSP (Gen.2) for distortion-free sound even at maximum volume
  • AAC coding for HD Bluetooth® 5.0 streaming
  • Automatic setup detection for quick and easy operation
  • Fast and simple assembly without stands or cables
  • Rugged birch plywood subwoofer housing with durable polyurea-coating
  • Lightweight, powder-coated aluminium column housing
Content
General
Product type
Battery-powered PA speaker
Type
Set (1x ANNY 10, 2x receiver, 1x handheld microphone, 1x bodypack, 1x headset)
Frequency range
655 - 679 MHz
Weight
18,625 kg
Items in this set
LD Systems ANNY® 10 10" Portable battery-powered Bluetooth® PA System with mixer
Product type
Battery-powered PA speaker
Type
Powered
Color
Black
Channels
6 channels
System output (RMS)
80 W
System output (Peak)
160 W
Max. SPL Average (Sine burst)
111 dB
Max. SPL Peak (Sine burst)
118 dB
Frequency response (-10dB)
45 Hz - 20 kHz
Crossover frequency
1800 Hz
Dispersion (H x V)
120° x 60 °
Total Height
566 mm
Features
3-band EQ, effects (reverb & delay), 6-channel mixer with system presets, Priority/ducking mode, TWS, USB-C port für mobile device charging
Low/mid woofer:
Woofer dimensions
10 "
Woofer dimensions (mm)
254 mm
Width
361 mm
Woofer magnet
Ferrite
Depth
300 mm
Woofer brand
Custom-made
Woofer voice coil (inch)
2 "
Controls
effect, Input 1 Mic/Line switch, Input 1 volume, Input 2 Mic/Line switch, Input 2 volume, Input 3+4 volume, Input 5+6 (Bluetooth) volume, Main volume / menu navigation, Power
Woofer voice coil (mm)
51 mm
Indicators
multifunction LC display, power/battery status
Cabinet construction
Bass Reflex
Housing material
Polypropylene
Weight
18 kg
HF driver:
Horn
Constant directivity
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25 mm
Amplifier module (integrated):
Amplifier
Class D
Protection circuits
Short circuit, thermal overload
Ambient temperature (operating)
0°C - 40 °C
Relative Humidity
0 - 80% (non condensing)
Fuse
T2 AL 250V
Mains connector
IEC
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
150 W
Physical inputs
5
Physical input connectors
2 x 6.3 mm / XLR combo, 2 x RCA, 3.5 mm jack
Mix output
1
Mix output connector
XLR male
Bluetooth Standard
5.0
Bluetooth Audio Decoder
AAC, SBC
Rechargeable battery:
Rechargable batteries
2 x 12V / 5000mAh
Battery technology
Lead Acid
Battery life music (MUSIC, full volume)
5 Hours
Battery life music (ECO, mid volume)
25 Hours
Charging time (80%, no signal)
3.5 hours
Charging time (full recharge)
7 hours (no signal)
LD Systems ANNY® R B6 Receiver Module for ANNY®
Product type
Battery-powered PA speaker accessories
Type
Receivers
Modulation Type
FM
Transmission frequency range
655 - 679 MHz
Channels
12
Frequency response
50 Hz - 17 kHz
Controls
Mute Level (Squelch), Power / Volume, SYNC, Value Down, Value Up
Indicators
AF (audio signal), LED Display, RF (radio signal)
Connectors
Audio outputs, BNC-Antenna
Weight
0,08 kg
LD Systems ANNY® BP B6 Bodypack Transmitter for ANNY®
Product type
Battery-powered PA speaker accessories
Type
Bodypack
Transmission frequency range
655 - 679 MHz
Channels
12
Inputs
Mini-XLR (3-pin)
Signal-to-noise ratio
100 dB
Frequency response
45 Hz - 20 kHz
Rated HF output power
10 mW
Power supply
2 x AA battery
Operating time
>8 h (with alkaline batteries)
Width
64 mm
Height
100 mm
Depth
21 mm
Controls
Gain (3-stage input sensitivity), Power On/Off, standby
Indicators
battery status LED (low), Power
Other features
incl. batteries, IR frequency synchronisation, standby, switchable gain
Weight
0,09 kg
LD Systems ANNY® MD B6 Wireless Handheld Microphone for ANNY®
Product type
Battery-powered PA speaker accessories
Type
Microphones
Transmission frequency range
655 - 679 MHz
Channels
12
Directivity
Cardioid
Microphone type
Dynamic
Signal-to-noise ratio
104 dB
Frequency response
60 Hz - 20 kHz
Rated HF output power
10 mW
Power supply
2 x AA battery
Operating time
>8 h (with alkaline batteries)
Length
250.4 mm
Diameter
32.5 mm
Controls
Power On/Off
Other features
incl. batteries, IR frequency synchronisation
Indicators
power/battery status low (LED)
Weight
0,2 kg
LD Systems WS 100 MH 1 Headset microphone, black
Product type
Wireless Microphone System Accessories
Type
Headsets
Directivity
Cardioid
Nominal impedance
680 Ohm(s)
Frequency response
100 Hz - 12 KHz
Phantom power requierements
5 V
Microphone input
Mini-XLR (3-pin, female)
Cable length
1 m
Accessories (included)
Foam windscreen
Weight
0,049 kg
  • Portable active 2-way full-range loudspeaker
  • Built-in 6-channel mixer with 3-band EQ, reverb and delay
  • Long battery life: up to 25h (ECO mode) / 5h (max. volume)
  • 1x wireless handheld and 1x headset microphone with bodypack transmitter incl. AA batteries
  • Bluetooth® 5.0 and stereo streaming (TWS) with two ANNYs
  • Clear and distortion-free sound at maximum volume through DynX® DSP (Gen. 2)
  • 2x microphone/line inputs for versatile connection options
  • 1x stereo channel with 3.5mm jack (AUX) or RCA
  • Priority/ducking mode to emphasise the microphone signal
  • Wheels and telescopic handle for easy transport
  • 35-mm flange for use with a speaker stand
  • USB-C port for charging a tablet or smartphone
  • Footswitch input for hands-free effect control
  • Integrated holder for tablet or smartphone
The MAILA COL full-range column module makes MAILA truly versatile. With its 4x 6.5'' woofers, the elegant column element not only provides an extended low-mid range, but also includes a 4-channel DSP amplifier with 2.5 kW total power, which drives both the column itself and the MAILA SAT satellites. In this way, MAILA sets with column module can not only be used as a ground stack variant, but also as a flown array consisting of MAILA COL and up to eight MAILA SAT - especially useful for festivals and fixed installations. In addition, as with a classic line array, users can select different subwoofer arrangements and adapt them to the sound reinforcement requirements on site. On the ground, the use of MAILA COL provides a further advantage: the interconnected column module allows ground stack sound setups that are significantly higher (up to 3.4 metres) than conventional systems and, with its greater throw, also enables uniform sound coverage in the far field. With LogoLink®, LD Systems has added another innovation to MAILA. Via the free MAILA app (iPadOS), every MAILA system can be quickly, easily and precisely adjusted and wirelessly supplied with software updates. Once connected, the app automatically recognises the existing MAILA components and enables the system to be set up quickly and easily - including calculation of the SAT angles - in the run-up to an event. The highlight: the wireless antennas are invisibly integrated into the LD logo of the MAILA COL.  
Product type
MAILA Column
Type
Powered
Low/mid driver dimensions
4 x 6.5 "
Woofer size
16.51 mm
Woofer magnet
Neodymium
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50 mm
Amplifier
Class D
System Power (RMS)
2500 W
Frequency response (-6dB)
105 Hz - 500 Hz
Max. SPL Peak (Pink noise)
130 dB (fullspace @1m, Crastfactor 4)
Max. SPL Peak (Sine burst)
125.4 dB (fullspace @1m, 10% THD)
Max. SPL Avarage (Sine burst)
122 dB (100 Hz - 2 kHz, fullspace @1m, 10% THD)
Protection circuits
limiter, over-current, thermal overload
Input impedance
20000 Ohm(s)
Controls
Rotary/push encoder
Indicators
Indication LED, LC display, Limit, Power, Protect, Signal
Line inputs
1
Line input connectors
XLR
Line outputs
1
Line output connectors
XLR
Speaker output connections
SmartLink+®
Wireless Connectivity
LogoLink® for App Control
Operating voltage
SMPS
Power consumption (max.)
800 W
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Operating Temperature
0 - 40 °C
Relative Humidity
< 80 %, not condensing
Cabinet material
Die-cast aluminium
Cabinet surface
Powder-coated
Cabinet construction
Bass Reflex
Mounting
3 x M10, 4 x Pin, EasyMount+®
Handles
2
Width
205 mm
Height
1028 mm
Depth
354 mm
Weight
34,44 kg
Bit depth AD/DA converter
24 bit
Sampling frequency
48 kHz
 
POLAR 8 combines outstanding audio performance with straightforward handling to provide users the easiest way to get the best sound. The compact system is extremely easy to transport and delivers perfect sound quality, even in confined spaces, making it the perfect partner for small stages, rehearsal rooms, seminar rooms and garden parties. Two POLAR 8s can be connected via Bluetooth TWS in audio streaming applications to form a fully-fledged stereo system.

pdfUser´s manual

  • 2.1 Portable PA-System for Musicians, DJs, Gaming, Business Conferences
  • 3-channel mixer integrated
  • Connectivity for Microphone, Guitar, Keyboard, E-Drums, MP3 player, Laptop or PC, Mixer and more
  • 1400 W peak
  • For up to 70 people
  • 8" Bandpass subwoofer for punchy bass reproduction
  • Satellite speakers: 2 x 4" mid/high driver + 1" tweeter in a d'Appolito arrangement
  • D'Appolito arrangement provides coherent frequency dispersion
  • Integrated limiter: Protects the speakers from overload
  • Subwoofer volume control for perfect balance between bass and mid/high frequencies
  • Mobile: Compact design, sturdy front grilles, carrying handles

With the DAVE 8 Roadie, LD Systems are successfully implementing their motto "pro audio in motion“. This complete PA system with its powerful 1400-watt (Peak) power amp delivers astounding performance for mobile applications. The system is equipped with a high-performance 8" band-pass subwoofer and two satellite speakers (2 x 4" + 1“) and was designed as a flexible and portable mini PA system especially for musicians.

The DAVE 8 Roadie features three different inputs, which can be used simultaneously. One channel has a combo socket (XLR/jack) for dynamic microphones. One channel offers dual RCA connectors for computers as well as a combo socket (XLR/jack) for mixers or keyboards. Finally, the third channel has a 3.5 mm stereo and a 6.3 mm mono jack input for MP3 players or guitars with a switch for selecting the desired input. The high-performance Class A/B power amp module integrated in the subwoofer powers both the subwoofer and the satellites.

The systems features all of the usual protection circuits. The built-in limiter keeps the system safe from overload and ensures a long service life. On the side of the subwoofer, in addition to an ON/OFF switch and a phase reverse switch (180°), there is a separate subwoofer volume knob that allows you to find the perfect mix of brilliant treble, punchy mids, and powerful bass.

Sturdy front grilles and ergonomic handles on both the subwoofer and the satellites underscore the roadworthiness of the DAVE 8 Roadie and make the system an ideal companion for musicians.

Product type
PA Complete Systems

Colour
Black

Max. SPL (continuous)
117 dB

Max. SPL (peak)
123 dB

Frequency response
45 - 19000 Hz

Dispersion (H x V)
60 x 60 °

Weight
29,1 kg

Subwoofer


Low/mid driver dimensions
8 "

Woofer size
203 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

Woofer voice coil
1.5 "

Woofer voice coil (mm)
38.1 mm

Cabinet construction
Bandpass

Cabinet material
MDF

Cabinet surface
painted

Subwoofer width
352 mm

Subwoofer height
430 mm

Subwoofer depth
434 mm

Subwoofer features
limiter , threaded flange M20 , transport handle

Mid/Hi System


Midrange size
2 x 4 "

Midrange size
2 x 101.6 mm

Midrange magnet
Ferrite

Midrange brand
Custom-made

Midrange voice coil
1 "

Midrange voice coil
25.4 mm

Horn
radial

Tweeter dimensions
1 "

Tweeter dimensions (mm)
25.4 mm

Tweeter magnet
Ferrite

Tweeter brand
Custom-made

Tweeter voice coil
1 "

Tweeter voice coil (mm)
25.4 mm

Mid/Hi system impedance
4 Ohm(s)

Loudspeaker inputs
1

Speaker input connections
Speakon compatible

Cabinet construction mid/high
Closed

Mid/Hi system cabinet material
MDF

Mid/Hi system cabinet surface
painted

Mid/Hi system width
150 mm

Mid/Hi system height
350 mm

Mid/Hi system depth
170 mm

Mid/Hi system weight
4.2 kg

Mid/Hi system features
16 mm flange , metall front grille , transport handle

Amplifier module (integrated in subwoofer)


Amplifier
Class A/B

Amplifier output system (RMS)
350 W

Amplifier output system (peak)
1400 W

Protection circuits
limiter , over-current , short circuit

Cooling
heat sink

Controls
input switch (MP3 / Hi-Z) , Line level , Main level , Mic level , MP3 / Hi-Z level , On / Off , Sub level , Subwoofer Phase Reverse

Indicators
Power , Protect (protection circuit engaged)

Operating voltage
220 V AC - 240 V AC

Line inputs
3

Line input connectors
6.3 mm jack , RCA , XLR

Mic inputs
1

Mic inputs
6.3 mm jack , XLR

MP3 inputs
1

MP3 input connectors
3.5 mm jack

Hi-Z inputs
1

Hi-Z input connectors
6.3 mm jack

Loudspeaker outputs
2

Speaker output connections
Speakon compatible

pdfUser´s manual

The DAVE 15 G3 is a powerful active compact system. A bass reflex subwoofer with a 15" driver constitutes the massive, powerful foundation. The satellites with 8" drivers and HF horns are responsible for a natural sounding, assertive midrange and transparent treble. The subwoofer incorporates a 2.1 power amp module that drives the components of the DAVE 15 G3 with 2800W of Peak power.

The LD LECC DSP digital processor ensures perfectly tuned functioning of the system. It includes specially amplitude and low-latency optimised crossovers, separate equalisers and limiters for the bass, mid, and treble frequency ranges, and a dynamic compressor that controls the subwoofer according to volume and provides for increased punch at low volumes.

The thoroughly professional features of the DAVE 15 G3 active PA system include sturdy multiplex cabinets, all important protection circuits, RCA, XLR/jack combo and Speakon-compatible connectors, and ergonomically shaped, recessed handles. The LD "Evolutive" handles of the subwoofer are especially worthy of mention: the innovative design with a metal ring handle permits secure, convenient handling from all sides. For accurate vertical orientation, the speaker supports of the satellites are vertically adjustable by ± 13,5° max. in seven increments.

Speaker protection covers and a castor board with a lashing strap for simple transport are available as accessories. Matching speaker stands, spacer tubes, and mounting forks are also available separately.

Like all systems in the DAVE series, the DAVE 15 G3 is suitable for portable use and for permanent installation.

Product type
PA Complete Systems

Colour
Black

Max. SPL (continuous)
121 dB

Max. SPL (peak)
132 dB

Frequency response
35 - 19000 Hz

Dispersion (H x V)
90 x 40 °

Weight
60,9 kg

Subwoofer


Low/mid driver dimensions
15 "

Woofer size
381 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

Woofer voice coil
3 "

Woofer voice coil (mm)
76.2 mm

Cabinet construction
vented

Cabinet material
18 mm Plywood

Cabinet surface
texture paint

Subwoofer width
480 mm

Subwoofer height
570 mm

Subwoofer depth
635 mm

Subwoofer features
LD Systems "Evolutive" handles , threaded flange M20

Mid/Hi System


Midrange size
8 "

Midrange size
203.2 mm

Midrange magnet
Ferrite

Midrange brand
Custom-made

Midrange voice coil
1.5 "

Midrange voice coil
38.1 mm

Horn
CD horn

Tweeter dimensions
1 "

Tweeter dimensions (mm)
25.4 mm

Tweeter magnet
Ferrite

Tweeter brand
Custom-made

Tweeter voice coil
1 "

Tweeter voice coil (mm)
25.4 mm

Mid/Hi system impedance
4 Ohm(s)

Loudspeaker inputs
1

Speaker input connections
Speakon compatible

Cabinet construction mid/high
Closed

Mid/Hi system cabinet material
15 mm Plywood

Mid/Hi system cabinet surface
texture paint

Mid/Hi system width
275 mm

Mid/Hi system height
430 mm

Mid/Hi system depth
260 mm

Mid/Hi system features
ergonomically shaped insert handles , SM707 stand mount 36 mm

Amplifier module (integrated in subwoofer)


Amplifier
Class A/B

Amplifier output system (RMS)
700 W

Amplifier output system (peak)
2800 W

Protection circuits
limiter , overload , short circuit

Cooling
volume-controlled fan

Controls
Power , Sub level , Subwoofer Phase Reverse , volume

Indicators
Limit , on/off , Protect (protection circuit engaged) , Signal

Operating voltage
transformer

Operating voltage
220 V AC - 240 V AC

Power consumption
1000 VA

Line inputs
2

Line input connectors
6.3 mm jack , RCA , XLR

Line output connectors
XLR

Loudspeaker outputs
2

Speaker output connections
Speakon compatible

Compact, powerful and easy to use - a column PA remains the perfect companion for DJs and smaller bands. The LD Systems MAUI series represents this all-in-one concept in every detail and offers an unrivalled PA package in terms of sound, design, technology and handling. Set it up, plug it in, and you're all set! The MAUI 28 G3 delivers a huge, powerful and precise sound featuring 1,030 W RMS power (2,060 W peak), suitable for all applications: as a main PA for concerts, a sound system for mobile DJs or a public address system at weddings, corporate events and many more. With its sleek and elegant design, the MAUI 28 G3 looks very appealing. The two aluminium column elements sit at the front edge of the subwoofer, further enhancing the seamless visual impression. The columns are equipped with 12 x 3.5'' midrange drivers and 2 x 1'' tweeters, providing an even sound distribution with constant horizontal dispersion in combination with the innovative phase plug design. In addition, the BEM-optimised waveguide ahead of the tweeters carries the high frequencies even to the very rear audience areas. The LD Systems engineers also took great care of the crossover filter between midrange and tweeter speakers. The aim was to reduce harmonic distortion and interference to make the sound even more transparent, vibrant and powerful. The result speaks for itself: a highly precise reproduction of vocals and instruments across the entire 120° x 30° dispersion field. The columns of the MAUI 28 G3 are designed as cardioid speakers. This allows for controlled low-mids at the front and up to 18 dB of attenuation at the rear, resulting in a clean stage sound. Equipped with a single 12'' woofer and four bass reflex ports, the MAUI 28 G3 subwoofer delivers a clear, tight and punchy low end down to 37 Hz. By using a second subwoofer, the bass response can also be increased of up to 6 dB and it can also be driven in cardioid configuration at the push of a button (cardioid preset). In addition, the ultra-durable polyurea coating of the subwoofer easily withstands even the toughest demands on the road. The MAUI 28 G3 is a real sound machine, yet also convinces with its sophisticated features in the day-to-day life of DJs, musicians and technicians. Thanks to Bluetooth 5.0 and AAC coding, the column PA becomes even more versatile. Transport is as easy as usual, while the enhanced, hidden multi-pin connections between the elements provide increased stability during assembly. There's nothing that can knock the MAUI off its feet so easily...
  • 2060 W Peak-power and 127 dB max. SPL
  • Powerful and deep bass reproduction with 12" subwoofer
  • Balanced mids thanks to 12 x 3.5" full-range speakers
  • Precise and silky highs with 2 x 1" high-frequency drivers
  • Cardioid column for controlled low-mid and midrange sound dispersion
  • BEM optimised HF waveguide and midrange phase plugs for homogeneous dispersion
  • Optimised bass-reflex design improves bass response and reduces air flow noise
  • Can be combined with an additional MAUI® 28 G3 subwoofer for increased low end or for cardioid subwoofer setups
  • New Dynx® DSP (Gen.2) for distortion-free sound even at maximum volume
  • AAC coding for HD Bluetooth® 5.0 streaming
  • Automatic setup detection for quick and easy operation
  • Fast and simple assembly without stands or cables
  • Rugged birch plywood subwoofer housing with durable polyurea-coating
  • Lightweight, powder-coated aluminium column housing
   
Weight18.8 kg35 kg3 kg29.10 kg60.90 kg35.5 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 18.8 kg
Weight 35 kg
Weight 3 kg
Weight 29.10 kg
Weight 60.90 kg
Weight 35.5 kg