User’s manual The LD Systems DDQ Sub 212 is a powerful active subwoofer with two specially developed 12″ bass speakers and digital signal processing, specially conceived for use in combination with the full-range speakers of the DDQ Series. It ensures deep bass reproduction in PA systems and can also be matched to the satellites/tops of […]
The LD Systems DDQ Sub 212 is a powerful active subwoofer with two specially developed 12″ bass speakers and digital signal processing, specially conceived for use in combination with the full-range speakers of the DDQ Series. It ensures deep bass reproduction in PA systems and can also be matched to the satellites/tops of other manufacturers.
The two woofers with 3″ coils and neodymium magnets are driven by two 700-watt Hypex Class D power amplifier modules with a highly efficient switching power supply and a RMS output of 1400 watts. The DDQ Sub 212 attains a maximum sound-level pressure of 132 dB over a frequency response curve of 38 – 120 Hz.
The Sharc DSP programmed especially for the DDQ subwoofers has a large dynamic range of 127dB/113 dB (ADC/DAC) and handles frequency and phase correction in addition to providing extensive protection functions for reliable operation. Its 1ms look ahead limiter provides for distortion-free reproduction even at maximum volume levels. Seven DSP Presets permit selectable crossover frequencies between 80 and 120Hz. Eight additional presets make it possible to realize cardioid configurations of 2 or 3 subwoofers, whereby it is possible to attain rear attenuation of up to 20dB. The inputs and outputs as well as the separate mono output with a 100Hz high-pass filter use Neutrik XLR sockets. Additional features are LED function indicators and a ground lift switch; the volume and preset encoders can be deactivated to prevent inadvertent adjustment.
The compact band-pass enclosure of the DDQ Sub 212 is made of 18mm thick multiplex with an extremely durable polyurethane finish. It is prepared for mounting of casters and features comfortable handles and two M20 threaded flanges.
Product type
PA subwoofer
Type
Actives
Design
DSP controlled
Low/mid driver dimensions
2 x 12 “
Woofer size
2 x 304.8 mm mm
Woofer magnet
Neodymium
Woofer brand
Custom-made
Woofer voice coil
3 “
Woofer voice coil (mm)
76.5 mm
Amplifier
Class D
RMS
1400 (2 x 700) W
Frequency response
38 – 120 Hz
Max. SPL (continuous)
124 dB
Max. SPL (peak)
132 dB
Protection circuits
DSP-based “look ahead” limiter , over-current , RMS power supply limiter , RMS speaker limiter , short circuit
Controls
DSP presets , DSP/ Gain enable , Gain , ground lift , Power
Indicators
DSP/ Gain disable , Operate , Peak Limit , Signal
Line inputs
2
Line input connectors
XLR
Line outputs
3 (2x Input Link, 1x Sat Out with 100Hz high-pass)
Line output connectors
XLR
Operating voltage
Switching power supply
Operating voltage
180 – 264 V ~ / 47 – 63 Hz
Cabinet material
18 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
Bandpass
Width
420 mm
Height
620 mm
Depth
543 mm
Weight
34,5 kg
Features
15 x DSP presets with 4 selectable cardioid setups and 7 selectable crossover frequencies (80-120Hz) , 2 x threaded flange (M20) , 3 x corner handles , prepared for mounting of casters
Weight
34.50 kg
Reviews
There are no reviews yet.
Be the first to review “LD Systems DDQ SUB 212 2 x 12″ 1400W rms active PA Subwoofer with DSP” Cancel reply
The LD Systems DDQ Sub 212 is a powerful active subwoofer with two specially developed 12" bass speakers and digital signal processing, specially conceived for use in combination with the full-range speakers of the DDQ Series. It ensures deep bass reproduction in PA systems and can also be matched to the satellites/tops of other manufacturers.
The two woofers with 3" coils and neodymium magnets are driven by two 700-watt Hypex Class D power amplifier modules with a highly efficient switching power supply and a RMS output of 1400 watts. The DDQ Sub 212 attains a maximum sound-level pressure of 132 dB over a frequency response curve of 38 – 120 Hz.
The Sharc DSP programmed especially for the DDQ subwoofers has a large dynamic range of 127dB/113 dB (ADC/DAC) and handles frequency and phase correction in addition to providing extensive protection functions for reliable operation. Its 1ms look ahead limiter provides for distortion-free reproduction even at maximum volume levels. Seven DSP Presets permit selectable crossover frequencies between 80 and 120Hz. Eight additional presets make it possible to realize cardioid configurations of 2 or 3 subwoofers, whereby it is possible to attain rear attenuation of up to 20dB. The inputs and outputs as well as the separate mono output with a 100Hz high-pass filter use Neutrik XLR sockets. Additional features are LED function indicators and a ground lift switch; the volume and preset encoders can be deactivated to prevent inadvertent adjustment.
The compact band-pass enclosure of the DDQ Sub 212 is made of 18mm thick multiplex with an extremely durable polyurethane finish. It is prepared for mounting of casters and features comfortable handles and two M20 threaded flanges.
Product type
PA subwoofer
Type
Actives
Design
DSP controlled
Low/mid driver dimensions
2 x 12 "
Woofer size
2 x 304.8 mm mm
Woofer magnet
Neodymium
Woofer brand
Custom-made
Woofer voice coil
3 "
Woofer voice coil (mm)
76.5 mm
Amplifier
Class D
RMS
1400 (2 x 700) W
Frequency response
38 - 120 Hz
Max. SPL (continuous)
124 dB
Max. SPL (peak)
132 dB
Protection circuits
DSP-based "look ahead" limiter , over-current , RMS power supply limiter , RMS speaker limiter , short circuit
Controls
DSP presets , DSP/ Gain enable , Gain , ground lift , Power
Indicators
DSP/ Gain disable , Operate , Peak Limit , Signal
Line inputs
2
Line input connectors
XLR
Line outputs
3 (2x Input Link, 1x Sat Out with 100Hz high-pass)
Line output connectors
XLR
Operating voltage
Switching power supply
Operating voltage
180 - 264 V ~ / 47 - 63 Hz
Cabinet material
18 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
Bandpass
Width
420 mm
Height
620 mm
Depth
543 mm
Weight
34,5 kg
Features
15 x DSP presets with 4 selectable cardioid setups and 7 selectable crossover frequencies (80-120Hz) , 2 x threaded flange (M20) , 3 x corner handles , prepared for mounting of casters
Extending the ZXA1's size-defying performance and sleek styling into the low-end realm, the ZXA1-Sub packs 700 W of self-powered punch into a low-profile wood enclosure. Match ZXA1 with ZXA1-Sub and hear just how big a small rig can sound, whether you want to add a tight thump to a DJ set or give the highs and mids some breathing room in a live performance.
15mm Plywood Enclosure, Internally Braced, with Textured Paint
EVS-12S 305mm (12“) Woofer for Powerful, Engaging Bass Response
Class D Lightweight Amplifier
Pole Mount for Full-Range Systems
Dual XLR Inputs and Outputs
Switchable EQ Modes for Different Applications
LED indicators for Power On and Limit
Amplifier Power
800 Watts (RMS)
Color
Black
Coverage (Nominal -6 dB)
Omnidirectional
Input Connections
(2) XLR Stereo Input, (2) XLR Stereo Output
Power Requirement
120V: 90V-132v, 1.0 A, 50-60Hz 230V: 190V-264V, 0.6A, 50-60Hz
Speaker Type
Powered Subwoofer
Frequency Response (-3 dB)
53-93 Hz Half Space
Frequency Response (-10 dB)
44-118 Hz Half Space
Max. SPL/1m (calc)
126 dB Half Space
System Power Handling (Continuous/Program/Peak)
700 Watts
LF Transducer
(1) EVS-12S, 305mm (12“) Woofer
Crossover Frequency
100 Hz
Enclosure Material
9-ply, 15mm Plywood, Internally Braced, with Textured Paint
Outdoor
No
Grill
16GA Steel with Black Powdercoat
Height
400 mm (15.75“)
Width
444.5 mm (17.5“)
Depth
457.2 mm (18“)
Weight Net
20.9 kg (46.08 lbs)
Shipping Weight
26.5 kg (58.42 lbs)
Need a powerful bass enhanced system that wonʼt completely fill your van?
The ART 902-AS active subwoofer is what youʼre looking for.
Thanks to the newly designed 12” high power neodymium woofer it delivers granite like bass punch for any kind of application in a compact and easy to transport enclosure.
The cabinet is made in Baltic Birch and heavy duty painted to withstand the life on the road.
Acoustical Specifications
Frequency Response -3 dB:
45 Hz
÷ 120 kHz
Max SPL:
130 dB
Woofer:
12“, 3" v.c.
INPUT/OUTPUT SECTION
Input signal:
Bal / unbal
Input connectors:
Stereo combo xlr-jak
Output connectors:
Stereo xlr
Input sensitivity:
-2 dBu / +4 dBu
PROCESSOR SECTION
Crossover frequencies:
80 - 120 Hz
Protections:
Thermal, rms
Limiter:
Limiter
Controls:
Volume, phase, xover
AMPLIFIER SPECIFICATIONS
Total power:
1000 Watts
Low frequencies:
1000 Watts
Cooling:
Convection / forced
Connections:
VDE connector in / out
CABINET
Cabinet Material:
Balitc birch
Handles:
2 on side
Pole Mount/Cap:
Yes
Colour:
Black
PHYSICAL SPECIFICATIONS
Height:
515 / 20.27 mm/inch
Width:
410 / 16.14 mm/inch
Depth:
550 / 21.65 mm/inch
Net Weight:
29.6 / 65.25 Kg/Lbs
2000W power via ultra-efficient Class-D amplification
High-power 12″, heat-treated woofer with 3″ voice coil
Ultra-low frequency extension hits hard down to 35 Hz
DLP Digital Processor
Powerful, one-touch digital processor with bright OLED screen
Precision digital crossover
Presets for use with DLM and SRM Series full-range loudspeakers
Variable crossover control for optimization with any loudspeaker
Six total XLR connects for flexible I/O control
Two line level inputs
Two full-range outputs for side fills, etc.
Two high-pass outputs for direct connection to DLM loudspeakers
Unmatched system control for professional applications
Alignment delay up to 300ms for delay stack, balcony, etc.
Three memory locations for instant venue setting recall
Smart Protect DSP dynamically protects amp/driver
Innovative ultra-compact design
Highest-output compact subwoofer on the market
Fit an entire DLM system in nearly any car
Stack them up for storage
Pole mount a DLM8 or DLM12
Extremely durable 15mm poplar cabinet
Rugged, powder-coated 20 gauge steel grille
Ridiculously lightweight (48 lbs. / 21.7 kg)
Frequency response (-3 dB)
43 Hz-20 KHz
Frequency range (-10 dB)
37 Hz-20 KHz
Maximum SPL
127 dB
Coverage (H x V)
120° x 40°
Amplifier rating
1000 W
LF channel rating
500 W
HF channel rating
500 W
Crossover frequency
200 Hz
Connectors
2x XLR/TRS Combo Jack Input
1x 3.5 mm Input
1x Stereo RCA Input
1x Wireless Bluetooth® Audio Input
1x XLR THRU Output
1x XLR MIX OUT Output
Enclosure
Sub: 15 mm plywood
Column: Composite
Pole: Aluminum
Grille
Steel with black or white powder coat
Color
Black or white
Dimensions (HxWxD): mm (in)
Sub: 530 x 345 x 471 (20.9 x 13.6 x 18.5)
Column: 825 x 102 x 172 (32.5 x 4.0 x 6.9)
Pole: 929 x 48.5 x 55 (36.6 x 1.9 x 2.2)
Net weight
Sub: 44.66 lb (20.3 kg)
Column: 10.34 lb (4.7 kg)
Pole: 2.75 lb (1.25 kg)
Sub cover: 0.9 lb (0.4 kg)
Bag for column and pole: 1.87 (0.85 kg)
Shipping weight
Sub box: 50.71 lb (23 kg)
Column box: 18.30 lb (8.3 kg)
Power consumption3
100-240 V AC, 50-60 Hz, 1.5-0.6 A
Power for the sub, power for satellites and a thumping low end speaker. Smart design. Order today.
The 1,000-Watt INSPIRE iP12B powered subwoofer produces high levels of low-end punch with definition and clarity typical of larger systems. Equipped with a dedicated 600-Watt Class-D amplifier for the 12" long-excursion Low-Frequency (LF) driver and 2 x 200 Watt amps for your passive satellite speakers, the iP12B is ideally suited for small to medium-sized performance venues, houses of worship, boardroom presentations, nightclubs and much more. Lightweight (only 22.3 kg / 49.2 lbs) and easy to transport, the iP12B also features a 3-channel digital mixer with industry-leading KLARK TEKNIK Digital Sound Processing (DSP), Class-D amplifier and Spatial Sound technologies, plus convenient Bluetooth stereo audio streaming and iPhone/iPad remote control. This cool-running system delivers amazingly-deep, chest-pounding bass that will keep the party going all night long.
Tiny Subwoofer – Tremendous Sound Designed for maximum portability and low-end support, the iP12B can be used as a standalone subwoofer with your powered full range speakers, or the backbone of a great-sounding speaker system. Setup is fast and easy; just connect your mic or mixer feed, your passive loudspeakers, and power. The iP12B instantly fills the room with the world-famous TURBOSOUND "sound” that has won the coveted Queen’s Award an unprecedented three times.
KLARK TEKNIK – Inspired Technology KLARK TEKNIK is recognized worldwide as one of the most prestigious British audio companies, with a 40-year pedigree and even a TEC Lifetime Achievement Award to back it up. The Company has designed and manufactured products for world-class artists, and their legendary DN780 reverb processor is considered by leading audio engineers around the world as the industry standard. Check out their website to learn more about KLARK TEKNIK’s legendary heritage. TURBOSOUND is proud to incorporate custom-engineered KLARK TEKNIK Class-D amplifier and DSP technologies into their products.
DSP – the Secret to Superb Sound From the instant your signal enters the iP12B, the built-in DSP takes over ensuring the highest possible signal integrity. Much more than just selective EQ enhancement, the 24-bit processor analyses the incoming signal and intelligently applies specific filters to actually improve the sound quality. It’s like having an audio engineer monitoring the input and output signals, dialing in the perfect EQ and constantly making subtle adjustments to the crossover, compressor/limiter, three discrete amplifier channels and more, all of which adds up to significantly better sound.
Custom-Engineered Drivers Our speakers are designed specifically for each application – it’s what sets us apart from the competition. When you buy a TURBOSOUND speaker system, you can rest assured that the speakers inside have been engineered to perform flawlessly in conjunction with every other element for truly professional results.
Built-in Digital Mixer – Comprehensive Remote Control The iP12B features a fully addressable onboard digital mixer with two combo jack/XLR connectors that accept balanced and unbalanced connections for dynamic mics and line-level instruments. The simple and intuitive user interface consists of a single rotary push-encoder with Process, Setup, Exit and Enter function buttons. A beautifully-backlit LCD display controls DSP functions including mixer parameters, 3 band EQ and presets. All settings can be controlled locally, or via free downloadable iPhone/iPad apps – and locked down to prevent unauthorised access.
You get total control of the iP12B directly from your iPhone or iPad. This amazing feature lets you adjust all settings from either the listening area or the stage, for the perfect sound every time. The dedicated apps are available free of charge at turbosound.com, or from the Apple App Store.
Bluetooth Ready The days of tape decks, CD and even mp3 players are long gone. Now your music lives on your smartphone or computer tablet, so you can stop searching for those outdated cables and fancy adapters. An industry first, the iP12B puts all your music at your fingertips via stereo Bluetooth. Now with a simple wave of your hand, you can stream music from any Bluetooth-equipped iOS device, such as your iPad, iPod touch, iPhone or even your laptop computer.
Stunning Performance – Superb Value The INSPIRE iP12B powered subwoofer stands head and shoulders above the rest of the pack and delivers exceptional performance, even when pushed to the limit. Ultra-lightweight and powerful with a custom-designed 12" long-excursion LF driver, an integrated mixer, stereo Bluetooth streaming, iPhone/iPad remote control, 1,000 Watts of KLARK TEKNIK’s Class-D output power and Digital Sound Processing, the iP12B is ideal for both portable and installed applications.
FEATURES
Speaker configuration Active/passive: Active Type: Subwoofer LF driver: 12“ MF driver: N/A HF driver: N/A Power Amplifier class: D Wattage: 600W, 2 x 200W (satellites) Mixer/preamp: N/A Audio Frequency response: 45hZ - 150Hz +3dB Coverage pattern: N/A Max SPL: 120 dB peak Inputs XLR: 2 XLR/TRS combo TRS: N/A TS: N/A RCA: N/A Output/thru XLR: 2 TRS: N/A TS: N/A SpeakON: 2 Enclosure Cabinet material: 18 mm birch ply Width: 16.5“ Height: 19.1“ Depth: 19.7“ Weight: 49.2 lb.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.