Content | Quality 1 millisecond ahead … the LD Systems DDQ 10 active speaker.
The LD Systems DDQ 10 is an extremely high-performance 2-way active speaker for compact systems, FOH and monitor applications, delay lines, and permanent installations. The groundbreaking design and comprehensive features with leading components ensure superior performance in its class.
Trouble-free operation of the DDQ 10 is ensured by a specially programmed Sharc DSP with 24-bit/48-kHz converters that have remarkable dynamics of 127dB. It incorporates volume control, delay, EQ, crossover, phase, and all protection functions for the drivers and power amps. Heat sinks and a silent fan provide additional protection against overheating. The decisive advantage is attained by a predictive peak limiter with a look-ahead time of 1 millisecond. It guarantees absolute freedom from distortion even at maximum volume.
The DDQ 10 is loaded with a 10” Faital Pro PR300 neodymium woofer and a BMS tweeter. The asymmetrical tweeter horn offers optimal, even sound level distribution from the very first to the very last row of the audience. Its design ensures extraordinarily dynamic, linear reproduction up to 20 kHz. The two drivers are powered separately by two Class D Hypex UCD400 power stage modules with an output of 400W RMS each. They have a load-controlled, linear frequency response and extremely low total harmonic distortion with extremely low noise and, thanks to their switching power supply, maximum efficiency. The maximum sound pressure level of the DDQ 10 is 132dB with a dispersion angle of 80° x 60°; the horizontal sound distribution is characterized by extraordinary symmetry.
The input, link, and switchable subwoofer output of the DDQ 10 take the form of XLR sockets. A ground lift switch eliminates ground loop hum, and the system functions are indicated by LEDs.
The sturdy bass-reflex enclosure is made of 15mm birch plywood with a structured coating and a front grille made of steel. There is an integral 50° angle for use as a floor monitor and the tweeter horn can be turned accordingly. It has an adjustable tilt stand mount. The innovative Evolutive handles and the low weight facilitate transport. The DDQ 10 active system is made in Germany.
Type: Active
Woofer size: 10“
Woofer size: 254 mm
Woofer impedance: 4 ohms
Woofer magnet: neodymium
Woofer brand: Faital Pro (10PR300, 4 ohms)
Woofer voice coil: 2,5“
Woofer voice coil: 63.5 mm
Tweeter size: 1“
Tweeter size: 25.4 mm
Tweeter impedance: 8 ohms
Tweeter magnet: ceramic
Tweeter brand: BMS
Tweeter voice coil: 1“
Tweeter voice coil: 25.4 mm
Dispersion angle (H x V): 80° x 60°
AD/DA converter: 24-bit / 48 kHz
DSP: Sharc
Amplifier: 2 x Class D, Hypex Ucd400
Power output (RMS): 2 x 400 W
Frequency response (Hz): 59 - 20,000 Hz
Crossover frequency: 1500 Hz
Max. SPL (continuous): 119.5 dB 100 - 10,000Hz continuous program
Max. SPL (peak): 132 dB
Protection: DSP-based "look ahead" limiter, RMS speaker limiter, RMS power supply limiter, overvoltage, overcurrent
Integral media player: no
Controls: Gain dB, x-over sub, ground lift, power switch
Indicators: Operate, signal, peak limit, X-over sub
Line inputs: XLR
Line outputs: Input Link XLR, Sub Out XLR
Cabinet material: 15mm birch plywood
Cabinet surface: PA painting
Cabinet type: bass reflex
Monitor angle: 50°
Width: 315 mm
Height: 530 mm
Depth: 370 mm
Weight: 15.5 kg
Features: LD SYSTEMS Evolutive handles, 36 mm stand mount, vertical tilt (SM707: ± 13,5° in seven increments)
DSP characteristics:
Bit depth AD/DA converter: 24 bits
Internal sampling frequency: 48 kHz
Signal/noise ratio: 127 dB
| SRM V-Class Series High-Performance Powered Loudspeakers
SRM | V-Class High-Performance Powered Loudspeakers are a whole new tier of SRM portable loudspeakers that aren’t just made to get the job done, but to get it done better than anything else with unmatched clarity, output, and control packaged into sleek, rugged enclosures.
The original SRM Series was a game-changer when it was introduced in 1999. And the series is setting out to make its mark once again. This required a deep look at what matters today in a portable loudspeaker. Power, sound quality, and reliability. We didn't hold back. We combined our most rock-solid amplifier platform ever, premium transducers, and the best acoustic tuning in the industry – the result is a new level of performance that cannot be beat at this price.
- Best performance, sound quality, and reliability in its class
- Industry-leading 2000W Class-D amplifier with transparent system limiting and protection
- Superior sound with Advanced Impulse™ DSP tuning and Intelligent Bass Management™
- High-performance transducers and custom SymX™ Horn for unmatched clarity and accuracy
- SRM Mix Control™ built-in 4-channel digital mixer with Bluetooth®
- Complete wireless control via the SRM Connect™ app
- Wirelessly link 2 SRM | V-Class speakers together for music streaming applications plus control
- Dual-angle pole mount plus angled design for use as a floor monitor
| This highly professional 2-way active system is designed for absolute, long-term reliability. With its multi-functional bass reflex housing and finely tuned, user-friendly presets, the speakers are suitable as full-range, box, satellite and floor monitors. The STINGER® 10 A G3 is powered by a highly efficient Class-D amplifier with a powerful 300-watt continuous output. The specially developed 10" woofer and a BMS tweeter driver achieve a powerful bass response and fresh, natural trebles. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflection from floors and ceilings and prevents sidelobe levels, thus achieving controlled and homogeneous dispersion. LD Systems’ proprietary DynX® DSP technology means that the STINGER® 10 A G3 delivers perfect performance with maximum clarity and power under all conditions. The signal processing of the crossover function and the multi-band limiter achieve an optimal runtime and high freedom from distortion. Designed as an all-around workhorse, the housing of the speaker is made of robust birch plywood. An extremely resilient coating of polyurea offers exceptional robustness and durability. The features include a steel front grille, a dual-tilt stand attachment, flight points and ergonomic handles. The STINGER® 10 A G3 is a good value and attractive solution for professional sound systems, with extensive accessories that support usage on the stage and in fixed installations.
- Active 10" 2-way bass-reflex PA speaker
- 127 dB max. SPL and 300-watt RMS performance with a highly-efficient digital amplifier
- Perfect all-rounder for full-range, satellite and monitor applications
- Practical presets for fast and user-specific frequency tuning
- Homogeneous dispersion pattern thanks to a BEM-optimised tweeter wave guide
- 10" custom woofer and BMS tweeter driver
- Distortion-free sound at even maximum volumes, thanks to DynX® DSP technology
- 2 line/mic input channels with individual gain controllers plus mono mix output
- 12 mm birch plywood housing with ultra-robust polyurea coating and M10 rigging points
- Shock-resistant front grille for optimal protection of the speaker.
- 36 mm dual tilt stand attachment with 0° and 5° tilt angle
- Extensive and smart accessories for installation and transport
General
Product type
PA loudspeaker
Low/mid Woofer dimensions
10 "
Woofer dimensions (mm)
254 mm
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50 °
Frequency response
65 - 20000
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Controls
2 x gain, 2 x Mic/Line
Indicators
Limit, Mic, Mode, On, Protect (protection circuit engaged), Signal
Line input connectors
6.3 mm jack, XLR
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching), Switching power supply
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet material
12 mm Plywood
Cabinet construction
Bass Reflex
|
LD Systems Roadboy 65 HS B6
Portable PA Speaker with Headset
The compact, flexible sound system for small events, conferences, multimedia applications, podium discussions, schools, churches, etc.
The ultra-compact battery-powered combo amplifier, measuring 30 cm x 22 cm and weighting only 5 kg, provides an impressive sound pressure level of 110 dB max. Despite its small format, this mobile all-in-one speaker box provides great audibility and is equipped with unique features.
Product type
Battery-powered PA speaker
Low/mid driver dimensions
6.5 "
Woofer type
Broadband speaker
Frequency response
80 - 15.000 Hz
Protection circuits
short circuit
Controls
Bass , Line Gain , Master , Mic Gain , Power , Treble , Voice priority on / off
Indicators
Charge/battery status , Power
Supported media
Audio-CD , CD-R , CD-R/W , SD Card , USB stick
Supported formats
Audio-CD , MP3 file , MP3-CD , WMA file , WMA-CD
Media player controls
CD ejector , Folder - , Folder + , Mode (CD / SD / USB) , mute , Next Track , Play / Pause , Power / Volume , Previous Track , Program , Repeat , Shuffle , Stop
Media player display elements
Lighted multifunctional LC display
Line input connectors
RCA
Line output connectors
RCA
Speaker output connections
6.3 mm Jack
Transmission frequency range
655 - 679 MHz
Operating voltage
External 100- 240 V AC switch mode power supply
Operating voltage
15 - 18 V DC, 3 A
Rechargeable batteries
12 V / 2.6 AH
Cabinet material
polypropylene
Cabinet construction
vented
Other features
16 mm stand mount , transport handle
|
The Avante Audio A10 Achromic Series is a 10“, two-way active loudspeaker with a 1000W peak dynamic amplifier and an integrated DSP for a variety of applications including clubs, bars, mobile DJs, public address engagements, schools, houses of worship, fitness centers, and more. The Class-D amplifier delivers 250W (RMS) to the woofer, while the Class-AB amplifier drives 50W (RMS) to the high-frequency compression driver, which combine to provide a frequency range of 70 Hz to 20 kHz with a peak SPL of 121 dB.
The integrated DSP offers four modes: Normal, Club, Live, and Speech, allowing you to custom tailor the speaker to your specific application. Additionally, there is a two-band EQ to further enhance the sound. The H-PP molded enclosure features a steel grille and a dual position pole mount with 0 or 7.5° options. The rear panel offers a balanced combo XLR-1/4" input, two RCA inputs, and a balanced XLR output for connecting additional speakers. There are independent gain controls for the XLR and RCA inputs. The Avante A10 Achromic Series loudspeaker ships with a power cord.
- Amp Power: 1000W dynamic
- LF: Class-D 250W (RMS)
- HF: Class-AB 50W (RMS)
- Built-in digital signal processing (DSP) with LCD screen, EQ, and Presets
- Preset 1: Normal
- Preset 2: Live
- Preset 3: Club
- Preset 4: Speech
- Frequency Range: 70 Hz to 20 kHz
- Dispersion (H x V): 90 x 60°
- Output (Peak SPL at 1m): 121 dB
- Drivers: 10" woofer with 2" voice coil + 1" HF compression driver
- Inputs: Balanced combo XLR-1/4" and two RCA
- Output: Balanced XLR
- Enclosure: H-PP molded
- Grille: 1.2mm steel
- Handle: 1 x top
- Fly Points: 2 on top, 1 on back
- Pole Mounting: Dual position 0 or 7.5°
Type |
10.0" / 254.0 mm, 2-way active loudspeaker |
Frequency Range |
70 Hz to 20 kHz (-10 dB) |
SPL Level |
Peak: 121 dB |
Amplifier Power |
1000 W Dynamic, 250 W Class-D (LF) + 50 W Class-AB (HF) RMS |
DSP |
DSP Features: LCD screen with EQ and multiple presets |
Drivers |
10.0" / 254.0 mm woofer with 2.0" / 50.8 mm voice coil 1.0" / 25.4 mm HF compression driver |
Input and Output Connectors |
Input: Balanced female combo XLR-1/4" / 6.35 mm jack Input: 2 x RCA (phono) Output: Balanced male XLR |
Enclosure |
H-PP molded |
Grille Material |
0.05" / 1.20 mm steel |
Handles |
1 x top |
Flypoints |
2 top, 1 back |
Pole Mount |
Dual Position: 0 and 7.5° |
Power Input |
115 VAC, 60 Hz |
Power Consumption |
400 W |
Dimensions (H x W x D) |
20.9 x 12.2 x 11.8" / 530.9 x 309.9 x 299.7 mm |
Weight |
25.0 lb / 11.3 kg |
|
Features
400 Watt digital bi-amplification
127 dB max spl
Wide dispersion 90 x 70 constant directivity horn
10" High power woofer, 2.5" voice coil
1" Mylar dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 50 Hz ÷ 20 kHz
Max SPL: 127 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1" 1.4" voice coil
Woofer: 10" 2.5" voice coil
Input/Output Section
Input signal: bal/unbal
Input connectors: xlr-jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1800 Hz
Limiter: Fast limiter, RMS limiter
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Cabinet
Cabinet Material: Composite PP
Hardware: 2 x M10 flying points
Handles: 1 on top
Pole Mount/Cap: yes
Grille: steel
Colour: Anthracite grey
Physical Specifications
Height: 549/21.6 mm/inch
Width: 340/13.38 mm/inch
Depth: 304/11.96 mm/inch
Net Weight: 13.5/29.76 kg/lbs
|
Reviews
There are no reviews yet.