LD SYSTEMS DQOR8B Passive Indoor.Outdoor Installation Loudspeaker IP55 120W 8 ohm Black Pair

Call for Price

CompareAdd to wishlist Submit Better Price
  • For indoor and outdoor use, IP65 (DQOR 3) and IP55 (DQOR 5 & 8) certified
  • Corrosion-resistant aluminum front grille
  • Elegant, dynamic design to suit any environment
  • Available in black or white
  • Slide-and-lock wall mount with concealed integrated connections
  • Superb, balanced sound thanks to a 2-way system
  • Weather treated paper cone woofer and FerroFluid™-cooled titanium high frequency driver
  • Wide coverage angle (120° horizontal, 80° vertical)
  • BEM-optimized waveguide for balanced sound
  • 3″, 5″ and 8″ variants available
  • Available in two connection variants: low impedance (8 Ohm) or as a 70/100V version with multiple power taps, and can be operated under low impedance (16 Ohm)
  • For indoor and outdoor use, IP65 (DQOR 3) and IP55 (DQOR 5 & 8) certified
  • Corrosion-resistant aluminum front grille
  • Elegant, dynamic design to suit any environment
  • Available in black or white
  • Slide-and-lock wall mount with concealed integrated connections
  • Superb, balanced sound thanks to a 2-way system
  • Weather treated paper cone woofer and FerroFluid™-cooled titanium high frequency driver
  • Wide coverage angle (120° horizontal, 80° vertical)
  • BEM-optimized waveguide for balanced sound
  • 3″, 5″ and 8″ variants available
  • Available in two connection variants: low impedance (8 Ohm) or as a 70/100V version with multiple power taps, and can be operated under low impedance (16 Ohm)

 

Read more

8″ Two-way passive Indoor/Outdoor Installation Loudspeaker 8 Ohm, Black (pair)

Encourage your customers and guests to linger for longer with great sound. Thanks to their wide coverage angle and balanced sound, DQOR loudspeakers provide an inviting ambience.

Whether indoors or outdoors, with its elegant, dynamic design in black or white, the 2-way speaker fits harmoniously into any installation. Thanks to the clever slide-and-lock wall mount with concealed integrated connections, there is no need for unsightly cables. To maintain an elegant and smart look on the long term, the front grille is made of corrosion-resistant aluminum.

No restrictions! With a tilt angle of up to 27° and a 45° horizontal swivel angle, DQOR loudspeakers offer flexible positioning to meet your needs.

DQOR loudspeakers can also be used in a distributed sound system with numerous speakers and long cable runs. The DQOR 3T, DQOR 5T and DQOR 8T models are equipped with multitap transformers for 70V/100V systems to minimize power loss. Play background music and announcements at the sound level you want: the output power of each speaker can be adjusted with a power tap. Alternatively, the transformer variants can also be operated at conventional low impedance amplifier outputs. Their 16 Ohm impedance allows the parallel connection of up to eight DQOR loudspeakers at 2 Ohm. DQOR series loudspeakers provide superb sound and the sort of feel-good atmosphere which always puts your customers and employees in a great mood, whether in your shop, your hotel lobby, at a beach bar or on a cruise ship.

Product type
PA loudspeaker
Type
Passive
Low/mid driver dimensions
8 “
Woofer size
200 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 “
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Waveguide
HF driver dimensions
1 “
HF driver size
25.4 mm
HF driver magnet
Neodymium
HF driver brand
Custom-made
HF driver voice coil
1 “
HF driver voice coil
25.4 mm
Dispersion (H x V)
120° x 80° (-6 dB)
Load rating (RMS)
120 W
Peak power
240 W (>100Hz)
Frequency response
62 – 20000 Hz (-10dB)
Crossover frequency
1800 Hz
SPL (1W/1m)
88 dB
Max. SPL
109 dB
Impedance
8 Ohm(s)
Speaker input connections
4-pole Terminal Block. Pitch 5.08mm
Cabinet material
ABS plastic
Cabinet colour
Black (RAL9005)
Protection class IP
55
Width
255.8 mm
Height
413.9 mm
Depth
314,6 mm
Accessories (included)
Allen Key for the safety screw , Bracket for surface mount
Optional accessories
LDDQORWMC (rubber cover set for wall mount bracket)
Weight
5,2 kg

 

 

Weight 5.5 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS DQOR8B Passive Indoor.Outdoor Installation Loudspeaker IP55 120W 8 ohm Black Pair”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD SYSTEMS DQOR8B Passive Indoor.Outdoor Installation Loudspeaker IP55 120W 8 ohm Black Pair removeJBL AM 7200/95 2-Way MID/HIGH Passive Loudspeaker 450W removeRCF MR 88: 300 W IEC, 8", 1", 2 WAY SPEAKER removeDYNACORD D-8W 2-Way Speaker 250 Watts White removeRCF C4128: 400 W AES, 2X8", 1", TWO-WAY DUAL WOOFER SPEAKER removeJBL AM 7200/64 2-Way MID/HIGH Passive Loudspeaker 450W remove
NameLD SYSTEMS DQOR8B Passive Indoor.Outdoor Installation Loudspeaker IP55 120W 8 ohm Black Pair removeJBL AM 7200/95 2-Way MID/HIGH Passive Loudspeaker 450W removeRCF MR 88: 300 W IEC, 8", 1", 2 WAY SPEAKER removeDYNACORD D-8W 2-Way Speaker 250 Watts White removeRCF C4128: 400 W AES, 2X8", 1", TWO-WAY DUAL WOOFER SPEAKER removeJBL AM 7200/64 2-Way MID/HIGH Passive Loudspeaker 450W remove
ImageLDDQOR8B_weatherproof_outdoor_lodspeaker_8inch_120w
SKULDDQOR8BAM 7200/95MR88E009281C4128AM 7200/64
Rating
PriceCall for Price 3,063.00 incl. GR VAT 469.54 incl. GR VAT 855.00 incl. GR VAT 888.14 incl. GR VAT 3,063.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Call for Price

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • For indoor and outdoor use, IP65 (DQOR 3) and IP55 (DQOR 5 & 8) certified
  • Corrosion-resistant aluminum front grille
  • Elegant, dynamic design to suit any environment
  • Available in black or white
  • Slide-and-lock wall mount with concealed integrated connections
  • Superb, balanced sound thanks to a 2-way system
  • Weather treated paper cone woofer and FerroFluid™-cooled titanium high frequency driver
  • Wide coverage angle (120° horizontal, 80° vertical)
  • BEM-optimized waveguide for balanced sound
  • 3", 5" and 8" variants available
  • Available in two connection variants: low impedance (8 Ohm) or as a 70/100V version with multiple power taps, and can be operated under low impedance (16 Ohm)
Content

8" Two-way passive Indoor/Outdoor Installation Loudspeaker 8 Ohm, Black (pair)

Encourage your customers and guests to linger for longer with great sound. Thanks to their wide coverage angle and balanced sound, DQOR loudspeakers provide an inviting ambience. Whether indoors or outdoors, with its elegant, dynamic design in black or white, the 2-way speaker fits harmoniously into any installation. Thanks to the clever slide-and-lock wall mount with concealed integrated connections, there is no need for unsightly cables. To maintain an elegant and smart look on the long term, the front grille is made of corrosion-resistant aluminum. No restrictions! With a tilt angle of up to 27° and a 45° horizontal swivel angle, DQOR loudspeakers offer flexible positioning to meet your needs. DQOR loudspeakers can also be used in a distributed sound system with numerous speakers and long cable runs. The DQOR 3T, DQOR 5T and DQOR 8T models are equipped with multitap transformers for 70V/100V systems to minimize power loss. Play background music and announcements at the sound level you want: the output power of each speaker can be adjusted with a power tap. Alternatively, the transformer variants can also be operated at conventional low impedance amplifier outputs. Their 16 Ohm impedance allows the parallel connection of up to eight DQOR loudspeakers at 2 Ohm. DQOR series loudspeakers provide superb sound and the sort of feel-good atmosphere which always puts your customers and employees in a great mood, whether in your shop, your hotel lobby, at a beach bar or on a cruise ship.
Product type
PA loudspeaker
Type
Passive
Low/mid driver dimensions
8 "
Woofer size
200 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Waveguide
HF driver dimensions
1 "
HF driver size
25.4 mm
HF driver magnet
Neodymium
HF driver brand
Custom-made
HF driver voice coil
1 "
HF driver voice coil
25.4 mm
Dispersion (H x V)
120° x 80° (-6 dB)
Load rating (RMS)
120 W
Peak power
240 W (>100Hz)
Frequency response
62 - 20000 Hz (-10dB)
Crossover frequency
1800 Hz
SPL (1W/1m)
88 dB
Max. SPL
109 dB
Impedance
8 Ohm(s)
Speaker input connections
4-pole Terminal Block. Pitch 5.08mm
Cabinet material
ABS plastic
Cabinet colour
Black (RAL9005)
Protection class IP
55
Width
255.8 mm
Height
413.9 mm
Depth
314,6 mm
Accessories (included)
Allen Key for the safety screw , Bracket for surface mount
Optional accessories
LDDQORWMC (rubber cover set for wall mount bracket)
Weight
5,2 kg
   

    * 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.

    * CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.

    * 2432H High-Frequency Compression Driver

    * PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.

    * Bi-Amp/Passive Switchable.

    * Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).


Frequency Range (-10 dB)       :       260 Hz – 20 kHz

Frequency Response (±3 dB)       :       330 Hz – 18 kHz

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       11

Directivity Index (DI)       :       10.5 dB

Crossover Modes       :       Bi-amp/Passive switchable

Crossover Frequency       :       2.2 kHz

Transducer Power Rating (AES)       :       MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs

Long-Term System Power Rating (IEC)       :       MF/HF: 200 W (800 W peak), 100 hrs

Maximum SPL5       :       Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W @ 1m)       :       Passive mode: 108 dB SPL

Nominal Impedance       :       8 ohms

Midrange Driver       :       JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver

Sensitivity (1W @ 1m)
(Midrange)       :       108 dB SPL

High Frequency Driver       :       JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

Sensitivity (1W @ 1m)
(High Frequency)       :       113 dB SPL

Waveguide       :       PT-K95MH

Enclosure       :       Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment       :       13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish       :       Black DuraFlex™ finish.
White available upon request.

Grille       :       Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector       :       NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental Specifications       :       Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical cabinet orientation)       :       548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)

Net Weight       :       27.2 kg (60 lb)

Optional Accessories       :       M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

The Monitor 88 is the result of extensive research in the development of new transducers and crossover design. The result is a product with exceptional fidelity, the ability to produce deep controlled bass and extended high frequencies without sacrificing efficiency.
The low-frequency 8“driver ʼs low-mass, carbon fiber diaphragm remains extremely rigid at high power levels,producing a more linear response and lower distortion.
The high-frequency section features a constant directivity horn with a built-in mechanical phase equalizer.
The horn is driven by a Ferrofluid® cooled,1“titanium dome tweeter.
All components are housed in a vented enclosure formed from semiexpanded polystyrene foam.
The speaker system is available in black (Monitor 88)or white (Monitor 88W).

Features
High quality music reproduction
Transducers LF 8" - HF 1" constant directivity tweeter
Built-in low inductance passive crossover with high frequency dynamic protection, bass refl ex @65Hz
Lightweight, UV/weather resistant, trapezoidal shaped enclosure for multiple applications and minimum visual intrusion
Integrated mounting points for use with optional mounting hardware

 

Acoustical Specifications
Type Of Speaker:Two-way 
Frequency Response:70 Hz÷ 20 kHz
Max SPL @ 1m:120 dB 
Horizontal coverage angle:110° 
Vertical coverage angle:80° 
Power Handling:300 Watt RMS 
System Sensitivity:91 dB 
Impedance:8 Ω 
Crossover frequencies:3 Hz 
TRANSDUCERS
Speaker:8“ 
Tweeter:1“ 
INPUT SECTION
Input connector:Push type terminal 
CABINET
Hardware:Body in self-extinguishing 
Colour:White / Black 
Grille:Steel 
PHYSICAL SPECIFICATIONS
Height:430 / 16.92 
Width:290 / 11.41 
Depth:260 / 10.23 
Net Weight:15 / 33.06 
SHIPPING INFORMATION
Package height:535 / 21.06 
Package width:370 / 14.56 
Package depth:355 / 13.97 
Shipping Weight:16.5 / 36.37

The D 8 is a light-weight, robust 8“/1”, 2-way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.
The cabinet is manufactured from ABS and therefore is extremely resistant against abuse on the road. For low and mid frequencies a DYNACORD DND8200-8 neodymium transducer is used. The Electro-Voice DH3 driver is used for the projection of the high frequencies. The Constant-Directivity HF horn has been integrated into the baffle by CAD methods. The nominal coverage angle of the cabinet is 90°*90°, horizontal*vertical, respectively.
Power handling of the cabinet is 250 W (rated) and 1000W (peak). The maximum sound pressure level is 124 dB, the frequency range of the D 8 is from 65Hz to 20kHz. The D 8 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in high-performance small-format active and passive satellite systems.
Every transducer is protected against short-term thermal overload with thermal cutout switches and halogen protectors. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. The protection exhibits ʽsoftʼ switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
Extremely durable acoustic foam mounted to a strong powder-coated steel grille protects the loudspeaker components against any mechanical damage. The trapezoidally shaped enclosure also allows employing the cabinet in monitoring applications. A stable, integrated carrying handle and the integrated stand socket for pole-mount stands allow easy transportation and set-up. A protective cover is available as an optional accessory.

The C4128 is a full range 2 way high sensitivity, dual woofer passive system, compact and versatile specially designed for under balcony applications.

It is designed to provide extended low frequency performance from a compact, vented enclosure. It features advanced technology transducers: two 8" woofers equipped with a 2" voice coil and a 1" neodymium compression driver equipped with a 1.5" voice coil. The compression driver is mounted on a rotatable 90 x 70 constant directivity horn, providing very natural sound reproduction.
The cabinet is asymmetric (15° and 45°) for versatile under balcony applications as well as ceiling/wall installation and floor monitoring operations.
The wide coverage angle and the true constant directivity of the newly designed horn make very easy the coverage of large audiences.
 

Features
High efficiency
1" neodymium compression driver with 1.5" voice coil
Asymmetrical cabinet under-balcony/wedge monitor applications
Active Mosfet Compression Driver Protection
LICC Crossover
90°x 70° CMD (Constant Matching Design) constant directivity rotatable horn
M10 mounting points

 

Applications
  • Under Balcony Applications
  • Permanent Installations
  • Main Reinforcement in small spaces
  • Portable Systems AV Presentations
  • Zone Delay and Fill Systems
  • Stage monitor in multimedia environments, auditoriums house of worship

 

Acoustical Specifications
Frequency Response -10 dB:100 Hz÷ 20 kHz
Frequency Response -3 dB:150 Hz÷ 15 kHz
Max SPL @ 1m:122 dB 
Horizontal coverage angle:90° 
Vertical coverage angle:70° 
Directivity index; Q:9.25 
System Sensitivity:96 dB 
Nominal Impedance:8 Ω 
Power Handling:400 Watt 
Peak Power Handling:1600 Watt 
Recommended Amplifier:800 
Protections:Dynamic 
Crossover frequencies:2100 Hz 
TRANSDUCERS
Compression Driver:1" HF driver , 1.5" voice coil 
Nominal Impedence:8 Ω 
Input Power Rating:25 Watt AES 
Sensitivity:109 dB 
Woofer:2 x 8" woofer, 2" voice coil 
Nominal Impedence:16 Ω 
Input Power Rating:200 Watts AES 
Sensitivity:94 dB 
INPUT SECTION
Input connector:Speakon NL4 
Output connector:Speakon NL4 
CABINET
Cabinet Material:10 mm birch plywood construction 
Hardware:3 x M10, 4 X M5, 2 X M6 inserts 
Pole Mount/Cap:Yes 
Grille:Custom perforated steel grille 
Colour:Black, white, scratch resistant paint 
PHYSICAL SPECIFICATIONS
Height:650 / 25.59 mm/inch 
Width:260 / 10.23 mm/inch 
Depth:299 / 11.77 mm/inch 
Net Weight:17.4 / 38.36 Kg/Lbs

    * 60° x 40° Coverage, rotatable for use in either vertical or horizontal orientation.

    * CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.

    * 2432H High-Frequency Compression Driver

    * PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.

    * Bi-Amp/Passive Switchable.

    * Optional planar array frame kits (see AE Series Array Guide).


Frequency Range (-10 dB)       :       260 Hz – 20 kHz

Frequency Response (±3 dB)       :       330 Hz – 18 kHz

Coverage Pattern       :       60° x 40°, rotatable waveguide

Directivity Factor (Q)       :       20

Directivity Index (DI)       :       13 dB

Crossover Modes       :       Bi-amp/Passive switchable

Crossover Frequency       :       2.3 kHz

Transducer Power Rating (AES)       :       MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs

Long-Term System Power Rating (IEC)       :       MF/HF: 200 W (800 W peak), 100 hrs

Maximum SPL       :       Bi-amp mode:
MF: 133 dB-SPL cont avg (139 dB peak)
HF: 135 dB-SPL cont avg (141 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W @ 1m):       :       Passive mode: 108 dB SPL

Nominal Impedance       :       8 ohms

Midrange Driver       :       JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver

Sensitivity (1W @ 1m)
(Midrange)       :       108 dB SPL

High Frequency Driver       :       JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

Sensitivity (1W @ 1m)
(High Frequency)       :       115 dB SPL

Waveguide       :       PT-K64MH

Enclosure       :       Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment       :       13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish       :       Black DuraFlex™ finish.
White available upon request.

Grille       :       Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector       :       NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental Specifications       :       Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical cabinet orientation)       :       548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)

Net Weight       :       27.2 kg (60 lb)

Optional Accessories       :       M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

Weight5.5 kg27.20 kg18.00 kg9.50 kg20.00 kg27.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.5 kg
Weight 27.20 kg
Weight 18.00 kg
Weight 9.50 kg
Weight 20.00 kg
Weight 27.20 kg