Content | This full-range loudspeaker impresses with its outstanding sound, even at low frequencies. The ICOA 15 A W by LD Systems is a genuine all-rounder that offers unparalleled features for its class. Its coaxial design, rotating, BEM-optimised CD horn and extensive and precisely calibrated DynX DSP presets make this powered 15" loudspeaker exceptionally flexible.
The outstanding bass reproduction from the horn-loaded woofer makes the LD ICOA 15 A W the ideal choice for musicians, bands, entertainers and dance schools. It also allows DJs to play sets without the need for a subwoofer. Deployed vertically, the speaker impresses as a satellite; horizontally, it\'s excellent in suspended systems or as a floor monitor. The efficient class-D power amplifier delivers 128 dB max. SPL and 1200 W peak performance. Especially the version with white housing and white front grille blends discreetly and unobtrusively into almost any environment.
Drawing on DynX DSP technology by LD Systems, the speaker delivers perfect performance with maximum clarity and power under all conditions. 4 presets, a 3-band EQ and a delay function facilitate optimal adjustment of the sound to the venue conditions. The 2 line/mic input channels with individual gain controllers, plus mono mix output, allow a variety of signal sources to be connected.
Thanks to its shock-resistant front grille and ideal 55° tilt angle, the LD ICOA 15 A W is also outstanding as a floor monitor. Placed vertically, the 36 mm dual tilt stand attachment offers the choice of a 0° or 5° tilt angle for optimally adapting the system to the local acoustic environment.
Extensive and smart accessories for installation and transport are optionally available. 4 aluminium handles with an ergonomic rubber surface provide optimal grip when carrying the speaker.
Product type
PA loudspeaker
Low/mid driver dimensions
15 "
Horn
BEM optimized CD Horn
HF driver brand
Custom-made
HF Driver Voice Coil
25.4 mm
Dispersion (H x V)
90 ° x 50
Frequency response
48 - 20000 Hz
Crossover frequency kHz
2 kHz
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Controls
2 x gain , On / off switch , Rotary/push encoder
Mic-/ Line Input Connectors
6.3 mm jack Combination sockets (symmetrical) , XLR
Line input connectors
3.5 mm TRS
Line output connectors
XLR
Ambient temperature ( in operation )
0 - 40 °C
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Relative Humidity
< 80 %, not condensing
Cabinet material
Polypropylene
Cabinet construction
Bass Reflex
Mounting
36mm flange (0°, 5°) , 6 x M10 flying points
Accessories (included)
Power cord
|
GENERAL
The PSA Systems JB-15 is the active variant of the PS-15. This active full range speaker has a built-in amplifier of the bi-amp type and delivers 300 watts RMS. In combination with the active crossover the audio signal is distributed efficiently on a woofer and tweeter. The PSA-15 has a 15-inch woofer, which effortlessly displays the low frequencies, starting at 40Hz. Here he is fed with less than 245 watts. The 1.35-inch compression driver takes it high for his account and get 55 watts of power. This was in fact the RMS power; peaks that are higher are no problem for the amplifier. You are assured of a solid, non-pinched sound.
JB Systems PSA-15 Speaker: Polypropylene
The PSA-15 has a smooth shaped casing made of polypropylene. A light but very strong type of plastic, which is good for long-term protection of the internal components. In addition, he is very practical, with a built-in carrying handle, M8 mounting points, a 35 mm stand adapter and support for monitor use. The latter is excellent as possible, thanks to the angle of the housing.
CONNECTIONS
The back contains the connections with two microphone inputs (XLR, 6.3 mm jack) and a line input (XLR, RCA). The inputs and outputs are balanced. As per the level can be controlled, there is also a master volume and a two-band tone control devices. The PSA 15 is very suitable for mobile use and permanent installation and can be used as PA speaker and be used as a monitor. Monitor Brackets are included. |
JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System
Key Features : Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.
2200 Watts peak output power, 1100 Watts continuous.
HiQnet? compatible; network control.
15-inch Differential Drive? low-frequency driver for extended low-frequency output.
60° x 40°coverage.
Stylized and ergonomically designed powder-coated die cast aluminum handles.
Six 3-inch fly track suspension points and fourteen M10 fittings (optional detachable flying fittings and forged eye bolt kits available).
Optional DPCN (CobraNet?) digital audio input module available. Specifications:
Frequency Range |
: |
34 Hz to 20 kHz (-10 dB) |
Frequency Response |
: |
43 Hz to 18 kHz ( ± 3 dB) |
Coverage Pattern |
: |
60°x 40° rotatable waveguide |
Directivity Factor (Q) |
: |
15.85 |
Directivity Index (DI) |
: |
12 dB |
Maximum Peak Output1 |
: |
138 dB SPL 1m |
Transducer Section |
|
|
Low Frequency Section |
: |
JBL 2265G, 381mm (15 in) dia., 76mm (3 in) Dual Coil neodymium Differential Drive?, Direct Cooled |
Bandpass Nominal Impedance |
: |
4 ohms |
Mid/High Frequency Section |
: |
|
Mid Frequency |
: |
JBL CMCD-82H, 200mm (8in) Dual Coil Differential? transducer |
High Frequency |
: |
JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit |
Waveguide |
: |
JBL PT-K64-MHF |
Bandpass Nominal Impedance |
: |
8 ohms
|
System |
|
|
DP2 Internal Amplification Output (at nominal load) |
: |
2200 Watts Peak, 1100 Watts Continuous |
DP2 Output (Continuous IEC shaped pink noise into rated load impedance) |
: |
750LF/350HF Watts |
DP2 Output Section |
: |
2-Channel, Class I |
Audio Input connector: |
: |
XLR with loop-through |
Network Control Connector |
: |
Ethernet, RJ45 |
Signal Processing |
: |
DSP Based, resident in Input Module |
System Management
|
: |
DSP based limiters for mechanical and thermal protection |
AC Power Operating Range |
: |
Auto Select 90-132VAC/ 216-264VAC, 50/60Hz
|
AC Line Voltage |
: |
50/60 Hz, Auto-Detect; 120V/ 240V (-15%, +10%) |
AC Input Connector |
: |
Neutrik PowerCon |
AC Loop-Thru |
: |
Neutrik PowerCon |
AC Current Requirement |
: |
6A per system at 120V, 3A per system at 240V |
Enclosure |
|
|
Box Construction |
: |
5/8in. multi-ply exterior grade Baltic birch. Internally braced. Black DuraFlex? finish.
|
Suspension System |
: |
6 standard air-cargo 3 in. track and 12 M10 fittings
|
Grille |
: |
14 Gauge Black powder-coated perforated steel with foam backing
|
Dimensions (H x W x D) |
: |
914.4 x 528.3 x 624.8mm (36 x 20.8 x 24.6 in) |
Net Weight |
: |
44 kg (97 lb) | |
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 15“
LF Driver Power Amp 500W Class D
HF Driver Size 6.5" (Mid), 1.75" (H)
HF Driver Power Amp 500W Class D (Shared Between Mid and HF)
Frequency Range 35Hz-20kHz (-10dB)
Crossover Frequency 500Hz, 2.1kHz
Maximum Peak SPL 134dB
Horizontal Coverage Angle 75 Degrees Axisymmetric
Vertical Coverage Angle 75 Degrees Axisymmetric
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly
Inputs 1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs 2 x XLR (Direct), 1 x XLR (Line)
Height 43.1“
Width 18.5“
Depth 16.8“
Weight 87 lb.
Manufacturer Part Number KW153
|
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 15“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 500W Class D
Frequency Range 44Hz-20kHz (-10dB)
Crossover Frequency 2kHz
Maximum Peak SPL 133dB
Horizontal Coverage Angle 60 Degrees Axisymmetric
Vertical Coverage Angle 60 Degrees Axisymmetric
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly
Inputs 1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs 2 x XLR (Direct), 1 x XLR (Line)
Height 32.1“
Width 17.5“
Depth 15.2“
Weight 64 lbs.
Manufacturer Part Number KW152 |
The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.
- 15-inch LF SMX woofer
- 6.5-inch MF driver
- 1.25-inch HF titanium compression driver
- 2000 W Class-D power amplifier with integrated FIR-Drive DSP
- 136 dB peak SPL
Frequency Range | 38 Hz - 20 kHz | Maximum SPL | 136 peak dB | Power Consumption | 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A | Power Rating | 2000 W | Frequency Response | 48 Hz - 20 kHz | Coverage (Nominal -6 dB) H | 60 ° | Coverage (Nominal -6 dB) V | 40 ° | LF Transducer | SMX2151 380 mm (15 in) | MF Transducer | EVS-6C 6.5-in midbass driver | HF Transducer | DH3-B 1.25-in titanium compression driver | Crossover Frequency | 700 Hz, 2900 Hz | Connector Type | (2) XLR/TRS combo jack and (1) XLR link output | Enclosure Material | 18-mm, 13-ply birch plywood with EVCoat | Grill | 16AWG steel with powdercoat | Suspension | (8) M10 suspension points | Height | 1023 mm (40.28“) | Width | 469 mm (18.46“) | Depth | 426 mm (16.77“) | Weight Net | 41.7 kg (91.93 lbs) | Shipping Weight | 46.8 kg (103.18 lbs) |
|
Reviews
There are no reviews yet.