Content | Music starts to really groove when you can feel the bass in your body. The ICOA SUB can deliver as much bass as you want - to get the people rocking and entice them to the dance floor. It can even lend a multimedia presentation that special oomph it needs to reach its audience.
The ICOA SUB pumps out serious bass and gives you greater headroom and a clearer sound. This is because your subwoofer relieves the main speaker, whose woofers are now less burdened by high-energy bass impulses, resulting in less intermodulation distortion. Even at higher volumes, the sound doesn't get muffled. Voices and instruments stay crystal clear.
Thanks to its powerful Class D amplifier with 600-watt RMS or 2400-watt peak output, you have some serious power at your command. The presets of the integrated DynX DSP - which offers crossover frequencies of 80, 100 and 120 Hz - let you finely balance your ICOA SUB perfectly with your system. Signal polarity can also be reversed and the SUB offers a delay line-preset for distances up to 10 meters.
When your needs begin to expand as the venues get bigger, your setup can grow along with you. Simply add more ICOA SUBs, which can be operated in parallel, giving you more and more power. You can also take advantage of the cardioid-preset. Simply position the additional subwoofers next to your ICOA SUB facing to the rear and enable the cardioid-preset to get a quieter and controlled low-end at the back while still keeping the punch at the front.
The rugged housings made of 18 mm laminated wood can be stacked, while the M20 thread on top lets you mount the main speakers using a distance pole. Transport is simplified by mounting rollers to the rear. Corner protectors guard the edges during setup. To keep the ICOA SUB from slipping out of your hands, its four aluminium grips are covered in rubber.
Whether you\'re a DJ, singer-songwriter, rock or party band, the ICOA SUB produces the perfect bass to complement your live music. Lectures and multimedia presentations also benefit from its clarity and powerful presence, giving you the proper support to amplify emotions in your audience.
- 18-inch subwoofer for powerful low-end up to 29 Hz
- 133 dB max. SPL and 2400 Watt peak power through highly efficient digital Class D power amplifier
- Optimized bass reflex ports
- DynX DSP with four application presets (three crossover frequencies, cardioid mode)
- Switchable signal polarity and adjustable delay line for up to 10 meters
- 2 x XLR/TRS "combo jack" inputs and 2 XLR Output
- 18 mm rugged plywood housing and heavy-duty grill
- 4 Aluminum handles with ergonomic rubber surface
- Securely stackable with four stacking-grooves
- M20 thread for distance pole
Product type
PA subwoofer
Type
Powered
Low/mid driver dimensions
18 "
Woofer size
457.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
4 "
Woofer voice coil (mm)
100 mm
Amplifier
Class D
RMS
600 W
Peak power
2400 W
Frequency response (-10dB)
29Hz Preset depending
Max. SPL (peak)
133 dB
Protection circuits
Excursion Limiter , over voltage , over-current , Peak Limiter , thermal overload
Controls
Push encoder
Indicators
LC display
Line inputs
2
Line input connectors
XLR/6.3mm jack combo jacks (balanced)
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 240 V
Power Consumption (max.)
675 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 60% (non-condensing)
Cabinet material
18 mm Multiplex
Cabinet surface
texture paint
Cabinet construction
Bass Reflex
Width
626 mm
Height
672 mm
Depth
637 mm
Weight
44,3 kg
| User's manualLD Systems STINGER SUB 18 A G3
Active 18" bass-reflex PA subwoofer
STINGER SUB 18 A G3
Engineered for rock-solid reliability day in, day out this active subwoofer is a truly professional performer. With built-in presets for quick system integration and a variety of cardioid array configurations it is completely user-friendly. The Stinger® SUB 18 A G3 is powered by high efficiency Class D amplification with a giant 800 watts RMS output. It drives a custom designed 18” woofer delivering a huge bottom end with terrific punch and excellent definition. The Stinger® SUB 18 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance and pristine, distortion-free bass reproduction at all times. Designed to be a real workhorse throughout, the well-braced bass reflex enclosure is constructed for horizontal and vertical orientation. It is made of rigid 18 mm birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, M20 threaded pole insert, stacking recesses and ergonomic handles the Stinger® 18 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
- Active 18” bass reflex PA subwoofer
- High-efficiency 800 watts RMS digital power stage and 135 dB max. SPL
- 18” custom design woofer for extended low end down to 35 Hz
- DynX® DSP technology for distortion-free performance
- 80, 100 and 120 Hz low pass presets
- Cardioid subwoofer array presets
- Horizontal or vertical placement
- 18 mm birch ply cabinet with ultra rugged polyurea finish
- Ergonomic handles and stacking recesses for easy transport and setup
- Shock-resistant front grill provides maximum speaker protection
- Insert for M20 threaded poles
- Smart transport accessories
Product type
PA subwoofer
Type
active
Low/mid driver dimensions
18 "
Woofer Size
457.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
4 "
Woofer voice coil (mm)
101.6 mm
Amplifier
Class D
RMS
800 W
Peak power
1600 W
Frequency response
35 - 200 Hz
Max. SPL (peak)
135 dB
Protection circuits
DC , limiter , over voltage , short circuit
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
Controls
Main Level , mode
Indicators
limit , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , SMPS
Power Consumption (max.)
600 VA
Operating Temperature
0 - 40 °C
Relative Humidity:
Cabinet material
18 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
677 mm
Height
547 mm
Depth
740 mm
Weight
42,6 kg
|
- 1400 Watt Digital Amplifier
- 18" Woofer, bass reflex housing
- Stereo crossover
- Switchable crossover frequencies
- Phase-reverse switch
- Electronic equalization, soft limiter and protection
- Stereo XLR input, Stereo XLR signal output
- Frequency Response 35 Hz - 120 Hz
- Max Spl: 133 Db
- Hi Pass Freq: 110 Hz
|
1,600 Watts of Gut-thumping Bass in a Compact Unit!
When you want thumping bass, the powerful Mackie SRM1850 powered subwoofer gives you much more than you'd expect from its compact size. The SRM1850 delivers 1,600 watts of huge-sounding bass through a custom-designed 18" woofer. It's easy to dial in great sound on the fly because the SRM1850 has presets specifically for use with Mackie SRM series loudspeakers. But with a variable digital crossover, it's easy to match with virtually any system too. For a powerful and portable bass reinforcement solution, the Mackie SRM1850 powered subwoofer will exceed your expectations.
Mackie SRM1850 Powered Subwoofer at a Glance:
- A flexible but easy-to-use subwoofer
- Smart DSP enhances your sound and saves you time
A flexible but easy-to-use subwoofer
If you play different rooms of different sizes, you'll love the flexibility of the Mackie SRM1850. And no matter what your system looks like on any given night, the SRM1850 is easy to set up. If you're using it to reinforce Mackie SRM loudspeakers, you'll find presets to match the SRM1850 to the specific speakers you're using (no tweaking required). With other speakers, the variable crossover makes it easy to fit the SRM1850 into the mix. And because it has dual full-range outputs in addition to dual highpassed outputs, you can integrate the SRM1850 into virtually any PA system.
Smart DSP enhances your sound and saves you time
The Mackie SRM1850 powered subwoofer is smart. It has built-in Smart Protect DSP to protect the amp/drivers from signal clipping and crossover presets for use with Mackie's SRM series speakers. These built-in options make setting up the SRM1850 a breeze at any venue. The SRM1850's rugged all-wood, internally braced cabinet uses a tough 18-gauge steel grille to protect its speaker from damage.
Mackie SRM1850 Powered Subwoofer Features:- 1,600W, 18" powered subwoofer with amazingly high size/output ratio
- 18" LF woofer for rich, solid low-frequency reinforcement
- Smart Protect DSP protects amp/driver from signal overloads
- 2 full-range outputs allow you to easily connect side-fill speakers
- 2 highpassed outputs for connecting to DLM Series loudspeakers
- Built-in crossover presets specifically for Mackie SRM series loudspeakers
- Pole mount allows you to attach a speaker pole for main speaker
- Stackable for easy storage/transport
- Compact design is highly portable
The Mackie SRM1850 delivers 1,600 watts of earth-shattering bass in a compact package!
Tech Specs Powered/Unpowered | Powered | LF Driver Size | 18“ | Enclosure Material | All-wood design | Mounting Options | Floor Only | Inputs | 2 x XLR | Outputs | 2 x XLR (high range), 2 x XLR (full range) | Height | 24.8“ | Width | 28“ | Depth | 29.6“ | Weight | 74 lbs. |
|
DBTechnologies' new subwoofers H Series offer remarkable specifications and user-friendliness. With 1500W (2000W Peak Power) and a high-performance 18' woofer with 8' coil, the Sub 18H is especially suited for small to mid-sized events, where high performance needs to be packaged into compact size. Thanks to their unique configuration, termed Hybrid Horn-Loading, the boxes can be tuned to the lowest frequencies to improve system efficiency and convey a deep, enveloping sound. Unlike conventional horn loaded systems, 15H and 18H subs ensure excellent efficiency even at close listening distance, which makes them suited for use even in small venues. |
Features
700 Watt digital amplification
132 dB max spl
18" High power woofer, 4" voice coil
Xover selector, phase switch and high pass outputs
Electronic equalization, soft limiter and protection
Stereo Xlr/Jack combo input, Stereo Xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 40 Hz ÷ Xover point kHz
Max SPL: 132 dB
Woofer: 18“, 4" voice coil
Input/Output Section
Input connectors: Combo stereo Jack-XLR male
Output connectors: Combo stereo XLR female
Processor Section
Crossover frequencies: 80 - 120 Hz
Protections: Limiter
Limiter: Fast limiter, rms limiter
Controls: Volume, phase, crossover switches
Amplifier Specifications
Total power: 1000 W
Cabinet
Cabinet Material: Baltic Birch
Handles: 2 on sides
Pole Mount/Cap: yes
Colour: Black
Physical Specifications
Height: 650/25.5 mm/inch
Width: 504/19.84 mm/inch
Depth: 650/25.5 mm/inch
Net Weight: 40.4/89.06 kg/lbs
|
Reviews
There are no reviews yet.