| Content | User's Manual
Data sheet
The LD Systems DDQ Sub 18 is a powerful active subwoofer with digital signal processing for demanding PA applications. It is precisely adapted for combination with the full-range speakers of the DDQ Series and is equally suitable for use with tops made by other manufacturers.
The compact bass-reflex design is loaded with an 18" FaitalPRO bass speaker that has a 4" voice coil and a neodymium magnet driven by two 700-watt Hypex Class D power amplifier modules with a highly efficient switching power supply with a total output of 1400 watts RMS. The DDQ Sub 18 attains a maximum sound-level pressure of 134 dB with a frequency response curve of 30 -120 Hz.
The Sharc DSP programmed especially for the DDQ subwoofers ensures distortion-free and reliable operation even at maximum volume levels with a 1ms look ahead limiter, frequency and phase correction, as well as all protection circuits, and has a large dynamic range of 127dB/113 dB (ADC/DAC). Seven DSP Presets permit selectable crossover frequencies between 80 and 120Hz. Eight additional presets make it possible to realize cardioid configurations of 2 or 3 subwoofers, whereby it is possible to attain rear attenuation of up to 20dB. In addition to XLR inputs and outputs, the DDQ Sub 18 has a separate mono output with a 100Hz high-pass filter. Additional features are LED function indicators and a ground lift switch; the volume and preset controls can be deactivated to prevent inadvertent adjustment.
The cabinet of the DDQ Sub 18 is made of 18mm thick multiplex with an extremely durable polyurethane finish. It is equipped with two M20 threaded flanges and ergonomic handles and is prepared for mounting of casters.
- Type: active
- Version: DSP-controlled
- Woofer size: 18“
- Woofer size: 457.2 mm
- Woofer magnet: neodymium
- Woofer brand: Faital Pro
- Woofer voice coil: 4 "
- Woofer voice coil: 76.5 mm
- Amplifier: Class D
- Power output (RMS): 2 x 700 W
- Frequency response: 30 Hz - 120 Hz
- Max. SPL (continuous): 126 dB
- Max. SPL (peak): 134 dB
- Protection: DSP-based "look ahead" limiter, RMS speaker limiter, RMS power supply limiter, short circuit, overvoltage
- Controls: Gain dB, DSP Preset, Ground Lift, DSP/Gain enable, Power
- Indicators: DSP/ Gain disable, Peak Limit, Signal, Operate
- Line inputs: 2
- Line input connectors: XLR
- Line outputs: 3 (2x Input Link, 1x Sat Out with 100Hz high-pass)
- Line output connectors: XLR
- Power supply: switching power supply
- Operating voltage: 180-264V ~ / 47-63 Hz
- Cabinet material: 18 mm plywood
- Cabinet surface: polyurethane
- Cabinet type: bass reflex
- Width: 510 mm
- Height: 700 mm
- Depth: 725 mm
- Features: 15 x DSP presets with 4 selectable cardioid setups and 7 selectable crossover frequencies (80-120Hz), 2 x threaded flange (M20), 3 x corner handles, prepared for mounting of casters
| Music starts to really groove when you can feel the bass in your body. The ICOA SUB can deliver as much bass as you want - to get the people rocking and entice them to the dance floor. It can even lend a multimedia presentation that special oomph it needs to reach its audience.
The ICOA SUB pumps out serious bass and gives you greater headroom and a clearer sound. This is because your subwoofer relieves the main speaker, whose woofers are now less burdened by high-energy bass impulses, resulting in less intermodulation distortion. Even at higher volumes, the sound doesn't get muffled. Voices and instruments stay crystal clear.
Thanks to its powerful Class D amplifier with 600-watt RMS or 2400-watt peak output, you have some serious power at your command. The presets of the integrated DynX DSP - which offers crossover frequencies of 80, 100 and 120 Hz - let you finely balance your ICOA SUB perfectly with your system. Signal polarity can also be reversed and the SUB offers a delay line-preset for distances up to 10 meters.
When your needs begin to expand as the venues get bigger, your setup can grow along with you. Simply add more ICOA SUBs, which can be operated in parallel, giving you more and more power. You can also take advantage of the cardioid-preset. Simply position the additional subwoofers next to your ICOA SUB facing to the rear and enable the cardioid-preset to get a quieter and controlled low-end at the back while still keeping the punch at the front.
The rugged housings made of 18 mm laminated wood can be stacked, while the M20 thread on top lets you mount the main speakers using a distance pole. Transport is simplified by mounting rollers to the rear. Corner protectors guard the edges during setup. To keep the ICOA SUB from slipping out of your hands, its four aluminium grips are covered in rubber.
Whether you\'re a DJ, singer-songwriter, rock or party band, the ICOA SUB produces the perfect bass to complement your live music. Lectures and multimedia presentations also benefit from its clarity and powerful presence, giving you the proper support to amplify emotions in your audience.
- 18-inch subwoofer for powerful low-end up to 29 Hz
- 133 dB max. SPL and 2400 Watt peak power through highly efficient digital Class D power amplifier
- Optimized bass reflex ports
- DynX DSP with four application presets (three crossover frequencies, cardioid mode)
- Switchable signal polarity and adjustable delay line for up to 10 meters
- 2 x XLR/TRS "combo jack" inputs and 2 XLR Output
- 18 mm rugged plywood housing and heavy-duty grill
- 4 Aluminum handles with ergonomic rubber surface
- Securely stackable with four stacking-grooves
- M20 thread for distance pole
Product type
PA subwoofer
Type
Powered
Low/mid driver dimensions
18 "
Woofer size
457.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
4 "
Woofer voice coil (mm)
100 mm
Amplifier
Class D
RMS
600 W
Peak power
2400 W
Frequency response (-10dB)
29Hz Preset depending
Max. SPL (peak)
133 dB
Protection circuits
Excursion Limiter , over voltage , over-current , Peak Limiter , thermal overload
Controls
Push encoder
Indicators
LC display
Line inputs
2
Line input connectors
XLR/6.3mm jack combo jacks (balanced)
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 240 V
Power Consumption (max.)
675 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 60% (non-condensing)
Cabinet material
18 mm Multiplex
Cabinet surface
texture paint
Cabinet construction
Bass Reflex
Width
626 mm
Height
672 mm
Depth
637 mm
Weight
44,3 kg
|
DBTechnologies' new subwoofers H Series offer remarkable specifications and user-friendliness. With 1500W (2000W Peak Power) and a high-performance 18' woofer with 8' coil, the Sub 18H is especially suited for small to mid-sized events, where high performance needs to be packaged into compact size. Thanks to their unique configuration, termed Hybrid Horn-Loading, the boxes can be tuned to the lowest frequencies to improve system efficiency and convey a deep, enveloping sound. Unlike conventional horn loaded systems, 15H and 18H subs ensure excellent efficiency even at close listening distance, which makes them suited for use even in small venues. |
The MILAN M18 is a self-powered bandpass subwoofer enclosure consisting of an 18" low frequency driver housed in an optimally tuned enclosure, together with an integrated lightweight 1kW Class D amplifier.
The amplifier provides two input channels with balanced jack/XLR connectors, and two link outputs on male XLRs, providing connections to further Milan mid-high cabinets or subwoofers. A filtered high-pass output also provides connections to other mid-high cabinets. The left and right signals are summed in the subwoofer through a low-pass filter to the 18" driver. A sub level control is provided in order to achieve an even level between the subwoofer and Milan mid-high cabinets. The M18 is available in two versions to suit regional AC mains voltages of either 110 volts or 230 volts, and mains power is supplied via an IEC mains connector.
The Class D amplifier features sophisticated signal processing which provides limiting functions to ensure high performance and long term reliability. Status LEDs indicate mains power, signal present and signal limit. The cabinet is constructed from 15mm laminated plywood and is finished in dark blue textured paint. A pole mount socket is fitted to allow Milan M15 cabinets to be mounted on optional 35mm speaker poles.
Full specifications
Net Weight 45kg (99lbs)
Dimensions 500mm x 700mm x 600mm (19.7" x 27.6" x 23.6“)
Components 1 x 18" (457mm) LF driver
Frequency Response 36Hz - 80Hz/125Hz ±3dB, 28Hz - 80Hz/125Hz ±10dB
Maximum SPL 125dB continuous, 131dB peak
Construction 18mm (3/4“) plywood enclosure finished in dark blue textured paint. Pole mount socket
Connectors Input: (2) Jack/XLR female, wired pin 2 hot; Link: (2) XLR male, wired pin 2 hot;
Output: (2) XLR male, wired pin 2 hot; IEC mains connector
Flying Hardware M10 rigging points on top and bottom
Spares & Accessories LS-1816 18" (457mm) LF loudspeaker
RC-1816 Recone kit
M18AMP Amplifier module
|
| Manufacturer |
ITALIAN STAGE |
| Warranty |
2 Years Gurantee |
| Speaker Category |
SubWoofer |
| Speaker Type |
Active |
| Speaker Material |
Wooden Cabin |
| Speaker Power (Watt) |
350 |
| Woofer (inches) |
18 |
| dB (max spl) |
128 |
| Weight (kg) |
29 |
| Frequency Response (Hz) |
20 έως 120 |
| Color |
Μαύρο |
|
- EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions. Bluetooth® is available in select countries.
- QuickSmartDSP features best-in-class processing. Easy setup via three presets, sub/top system-match, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.
- High-efficiency 1200 W Class-D power amplifier delivers up to 132 dB peak SPL utilizing ultraefficient, high-sensitivity transducer designed and engineered by EV.
- Ideal for portable and installed applications. Professional-grade hardware: integrated M20 threaded pole mount plate and two-handle design for easy lifting.
ELX200-18SP features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 132 dB SPL utilizing transducers designed and engineered by EV (18-inch EVS-18L woofer). Powered subwoofer models allow easy setup via three presets (Music, Live, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall
settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure. ELX200 powered models are ideal for portable and installed applications, with lightweight and compact 15-mm wood enclosures, integrated M20 threaded pole polemount plate, and two-handle design for easy lifting.
The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy (BTLE) technology, allows intuitive system control, configuration and monitoring of up to six powered ELX200 loudspeakers simultaneously. Receive alerts when your system is being overdriven, and control your system while in front of your speakers, not behind. Bluetooth® is available in select countries.
| Available Color |
Black |
| Connector Type |
(2) XLR/TRS combo jacks and (2) XLR link outputs |
| Depth |
574mm (22.6“) |
| Specifications |
| Enclosure Material |
15 mm plywood with EVCoat |
| Family |
ELX200 |
| Frequency Range (-10 dB) |
40 Hz – 145 Hz |
| Frequency Response (-3 dB) |
47 Hz – 105Hz |
| Grille |
18 AWG steel with powdercoat |
| Height |
600mm (23.6“) |
| LF Transducer |
EVS-18L 457 mm (18 in) |
| Low Pass Frequency |
Adjustable: 80 Hz, 100 Hz, 120 Hz, 150 Hz |
| Max. SPL/1m (calc) |
132dB |
| Power Consumption |
100 - 240 V~, 50 - 60 Hz, 1.8A |
| Power Rating |
1200W |
| Powered or Passive |
Powered |
| Shipping Weight |
33.1kg (73 lbs) |
| Speaker Type |
Subwoofer |
| Weight Net |
29kg (63.9 lbs) |
| Width |
507mm (20“) |
| Woofer Size |
18inch |
|
Reviews
There are no reviews yet.