LD Systems LDEB82AG3 STINGER 8″ active PA Speaker 300W RMS

514.60 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: 4049521206689
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: LDEB82AG3 Category:
User’s manual LD Systems STINGER 8 A G3 Active 8″ 2-way bass-reflex PA speaker 2-way active 8” bass reflex PA speaker High-efficiency 300 watts RMS digital power stage and 129 dB max. SPL Multi-purpose design for fullrange, satellite and monitor applications Application presets for quick frequency response contouring BEM optimized HF waveguide for uniform coverage […]

 

Read more

pdfUser’s manual

LD Systems STINGER 8 A G3
Active 8″ 2-way bass-reflex PA speaker

  • 2-way active 8” bass reflex PA speaker
  • High-efficiency 300 watts RMS digital power stage and 129 dB max. SPL
  • Multi-purpose design for fullrange, satellite and monitor applications
  • Application presets for quick frequency response contouring
  • BEM optimized HF waveguide for uniform coverage
  • 8” custom woofer and BMS compression driver
  • DynX® DSP technology for distortion-free performance
  • 2 line/mic input channels with individual gain controls plus mono mix out
  • 12 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
  • Shock-resistant front grill provides maximum speaker protection
  • 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
  • Large selection of smart installation and transport accessories

 

STINGER 8 A G3
Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 8 A G3 is powered by high efficiency Class D amplification with a hefty 300 watts RMS output. It drives a custom designed 8” woofer and BMS compression driver delivering a punchy low end and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 8 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 8 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA loudspeaker

Type
active

Low/mid driver dimensions
8 “

Woofer Size
203.2 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

Woofer voice coil
2 “

Woofer voice coil (mm)
50.8 mm

Horn
BEM optimized CD Horn

HF driver dimensions
1 “

HF Driver Size
25.4 mm

HF driver magnet
Ferrite

HF driver brand
BMS

HF driver voice coil
1 “

HF Driver Voice Coil
25.4 mm

Amplifier
Class D

Dispersion (H x V)
90 x 50 °

RMS
300 W

Peak power
600 W

Frequency response
70 – 20000 Hz

Max. SPL (peak)
125 dB

Protection circuits
Multiband limiter , over voltage , over-current , thermal overload

Input sensitivity
-9 dBu

Controls
2 x gain , 2 x Mic/Line , mode

Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal

Line inputs
2

Line input connectors
6.3 mm Jack , XLR

Line outputs
1

Line output connectors
XLR

Operating voltage
100 – 120 V / 50 – 60 Hz or 200 – 240 V / 50 – 60 Hz (automatic switching) , Switching Power Supply

Operating Temperature
0 – 40 °C

Relative Humidity:
< 80% (non-condensing)

Cabinet material
12 mm Plywood

Cabinet surface
Polyurea

Cabinet construction
vented

Width
270 mm

Height
457 mm

Depth
290 mm

Weight
10,8 kg

 

Weight 10.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDEB82AG3 STINGER 8″ active PA Speaker 300W RMS”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDEB82AG3 STINGER 8" active PA Speaker 300W RMS removeJB Systems PSA 8 active 120 Watt RMS removeQSC CP8 Compact Powered Loudspeaker 1000W Peak removeDAS AUDIO ACTION 8 PASSIVE SPEAKER 2 WAY 150W RMS removeLD SYSTEMS LDEB282AG3 STINGER 28 A G3 Active 2 x 8" 2-way bass-reflex PA speaker 500 Wrms removeVENTIS108A FBT Active Speaker 2-way 800W remove
NameLD Systems LDEB82AG3 STINGER 8" active PA Speaker 300W RMS removeJB Systems PSA 8 active 120 Watt RMS removeQSC CP8 Compact Powered Loudspeaker 1000W Peak removeDAS AUDIO ACTION 8 PASSIVE SPEAKER 2 WAY 150W RMS removeLD SYSTEMS LDEB282AG3 STINGER 28 A G3 Active 2 x 8" 2-way bass-reflex PA speaker 500 Wrms removeVENTIS108A FBT Active Speaker 2-way 800W remove
Image
SKULDEB82AG3SOSPE302010030ACTION8LDEB282AG3FBT00038
Rating
Price 514.60 incl. GR VAT 225.00 incl. GR VAT 549.00 incl. GR VAT558.00 incl. GR VAT 792.00 incl. GR VAT 997.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

In stock

In stock

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderIn stockIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentpdfUser's manual

LD Systems STINGER 8 A G3 Active 8" 2-way bass-reflex PA speaker

  • 2-way active 8” bass reflex PA speaker
  • High-efficiency 300 watts RMS digital power stage and 129 dB max. SPL
  • Multi-purpose design for fullrange, satellite and monitor applications
  • Application presets for quick frequency response contouring
  • BEM optimized HF waveguide for uniform coverage
  • 8” custom woofer and BMS compression driver
  • DynX® DSP technology for distortion-free performance
  • 2 line/mic input channels with individual gain controls plus mono mix out
  • 12 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
  • Shock-resistant front grill provides maximum speaker protection
  • 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
  • Large selection of smart installation and transport accessories
 
STINGER 8 A G3
Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 8 A G3 is powered by high efficiency Class D amplification with a hefty 300 watts RMS output. It drives a custom designed 8” woofer and BMS compression driver delivering a punchy low end and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 8 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 8 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA loudspeaker

Type
active

Low/mid driver dimensions
8 "

Woofer Size
203.2 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

Woofer voice coil
2 "

Woofer voice coil (mm)
50.8 mm

Horn
BEM optimized CD Horn

HF driver dimensions
1 "

HF Driver Size
25.4 mm

HF driver magnet
Ferrite

HF driver brand
BMS

HF driver voice coil
1 "

HF Driver Voice Coil
25.4 mm

Amplifier
Class D

Dispersion (H x V)
90 x 50 °

RMS
300 W

Peak power
600 W

Frequency response
70 - 20000 Hz

Max. SPL (peak)
125 dB

Protection circuits
Multiband limiter , over voltage , over-current , thermal overload

Input sensitivity
-9 dBu

Controls
2 x gain , 2 x Mic/Line , mode

Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal

Line inputs
2

Line input connectors
6.3 mm Jack , XLR

Line outputs
1

Line output connectors
XLR

Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , Switching Power Supply

Operating Temperature
0 - 40 °C

Relative Humidity:
< 80% (non-condensing)

Cabinet material
12 mm Plywood

Cabinet surface
Polyurea

Cabinet construction
vented

Width
270 mm

Height
457 mm

Depth
290 mm

Weight
10,8 kg
 
- PS 08 but active - Amplifier: 120Wrms (240 Music) - Balanced MIC + LINE input with level control - Balanced LINE outputs - Treble + Bass Master volume control + Technical Data - Amplifier power: 120Wrms / 240Wmusic - Signal / noise rate: 85dB - Micro input: 1.5mV @ 20kΩ - Line input: 1V @ 20kΩ - Tone controls: +/- 12dB @ 100Hz and 10kHz - Frequency response: 70 - 20,000Hz - Woofer: 8 "woofer (20cm) - Compression Driver / Horn: 1 "voice coil - Nominal dispersion: 90 ° x 60 ° (HxV) - Mains Input: 115Vac / 60Hz - 230V AC / 50Hz - Fuse: 250V 3.15A slow blow (20mm glass) - Dimensions: 402 x 294 x 220 mm - Weight: 8kgFeatures
  • Compact and powerful performance
  • 1000 Watt peak power Class-D amplifier module
  • Easily selected contours for commonly-used applications
  • Advanced DSP with Intrinsic Correction™ for superior sound quality and speaker protection
  • Directivity Matched Transition™ (DMT) for consistent frequency response across the entire coverage area
  • Light weight and highly portable
  • Professional appearance looks great in any application
  • Use for main PA, stage monitor, or instrument amplifier
  • 35 mm pole socket
  • Optional yoke, tote, and outdoor cover accessories
  • Complete EASE and CAD information available online
Model CP8
Configuration Two-way active loudspeaker
LF Transducer: 8 in (203 mm), cone
HF Transducer: 1.4 in (35.6 mm) compression driver
Frequency Response (-6 dB) 56 - 20 kHz
Frequency Range (-10 dB) 53 - 20 kHz
Nominal Coverage Angle: 90° Axisymetric
Maximum Rated SPL1: 124 dB
Amplifier: Class D Peak: 800 W (LF), 200 W (HF)
Controls: Power 2 x Gain Mic Boost Push Switch 6-way Contour Selection Switch
Indicators: Power LED 2 x Input Signal LED Input B MIC selected LED Limiter active LED
Connectors: 2 x locking XLR/F ¼” combo (Line Input and Mic/Line input) 1 x 3.5 mm TRS (Stereo Input) 1 x XLR/M (Mix Output) 1 x IEC power connector
AC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 Hz
AC Power Consumption (1/8th Power): 100 VAC, 0.75A - 240VAC 0.31A
Enclosure Material: Polypropylene
Attachment Points: M8 threaded insert
Color: Black (RAL 9011)
Grille: 18 Gauge powder-coated steel
Dimensions (HxWxD): 16.2 x 10.7 x 10.1 in 411 x 273 x 256 mm
Net Weight: 21.0 lbs (9.5 kg)
Shipping Weight: 25.5 lbs (11.4 kg)
Regulatory: EMC, UL, CB
Optional Accessories: CP8 Tote, CP8 Outdoor Cover, CP8 Yoke

Features

- 2-way, full-range system 
– 8″ bass loudspeaker 
– Compression driver
– Asymmetric enclosure design for stage monitor use
– Built-in rigging points 
– Stand mountable 

The Action 8 is a compact 2-way passive full-range loudspeaker that utilizes a 8” low frequency transducer and a full compression driver. The multi-angle cabinet is constructed of Birch plywood protected by an enviormentally friendly ISO-flex black paint finish. A rear located handle and a robust steel grille are provided. A 35 mm tripod socket allows for stand mounting.

 

Technical Data

RMS Power Handling150 W
Peak Power Handling600 W
Frequency Range (-10 dB)60 Hz-20 kHz
Nominal Impedance8 ohms
On-axis Sensitivity 1 W / 1 m92 dB SPL
Rated Peak SPL at 1 m120 dB
Dispersion80º x 80º
Enclosure MaterialBirch Plywood
Color/FinishBlack/ISO-Flex Paint
Connectors2 x NL4 Speakon
Dimensions (H x W x D)47.5 x 27.9 x 25.5 cm
18.7 x 11 x 10 in
Weight8.4 kg (18.5 lb)

 

User´s Manual Technical drawing LD Systems STINGER 28 A G3 Active 2 x 8" 2-way bass-reflex PA speaker
  • Active 2 x 8" 2-way bass-reflex PA speaker
  • 131 dB max. SPL and 500-watt RMS performance with a highly-efficient digital amplifier
  • Perfect all-rounder for full-range, satellite and monitor applications
  • Practical presets for fast and user-specific frequency tuning
  • Homogeneous dispersion pattern thanks to a BEM-optimised tweeter wave guide
  • Two 8" custom woofers and BMS tweeter driver
  • Distortion-free sound at even maximum volumes, thanks to DynX® DSP technology
  • 2 line/mic input channels with individual gain controllers plus mono mix output
  • Birch plywood housing with ultra-robust polyurea coating and M10 rigging points
  • Shock-resistant front grille for optimum speaker protection
  • 36 mm dual tilt stand attachment with 0° and 5° tilt angle
  • Extensive and smart accessories for installation and transport
This highly professional 2-way active system is designed for absolute, long-term reliability. With its rugged bass reflex housing and finely tuned, user-friendly presets, it is suitable for use as a full-range speaker, satellite or monitor. The Stinger® 28 A G3 is powered by a highly efficient Class-D amplifier with a powerful 500-watt continuous output. Its two specially developed 8" woofers and a BMS tweeter driver achieve a powerful bass response and fresh, natural trebles. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflection from floors and ceilings and prevents sidelobe levels, thus achieving controlled and homogeneous dispersion. LD Systems’ proprietary DynX® DSP technology means that the Stinger® 28 A G3 delivers perfect performance with maximum clarity and power under all conditions. The signal processing of the crossover function and the multi-band limiter achieve an optimal runtime and high freedom from distortion. Designed as an all-around workhorse, the housing of the speaker is made of robust birch plywood. An extremely resilient coating of polyurea offers exceptional robustness and durability. The features include a steel front grille, a dual-tilt stand attachment, flight points and ergonomic handles. The Stinger® 28 A G3 is a good value and attractive solution for professional sound systems, with extensive accessories that support usage on the stage and in fixed installations. Product type PA loudspeaker
Type active
Low/mid driver dimensions 2 x 8 "
Woofer size 2 x 203.2 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Woofer voice coil 2 "
Woofer voice coil (mm) 50.8 mm
Horn BEM optimized CD Horn
HF driver dimensions 1 "
HF Driver Size 25.4 mm
HF driver magnet Ferrite
HF driver brand BMS
HF driver voice coil 1 "
HF Driver Voice Coil 25.4 mm
Amplifier Class D
Dispersion (H x V) 90 x 50 °
RMS 500 W
Peak power 1000 W
Frequency response 58 - 20000 Hz
Max. SPL (peak) 131 dB
Protection circuits Multiband limiter , over voltage , over-current , thermal overload
Input sensitivity -5 dBu
Controls 2 x gain , 2 x Mic/Line , Mode
Indicators Limit , Mode , On , Protect (protection circuit engaged) , Signal
Line inputs 2
Line input connectors 6.3 mm jack , XLR
Line outputs 1
Line output connectors XLR
Operating voltage 100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Operating Temperature 0 - 40 °C
Relative Humidity < 80% (non-condensing)
Cabinet material 12 mm Plywood
Cabinet surface Polyurea
Cabinet construction vented
Width 270 mm
Height 756 mm
Depth 290 mm
Weight 20,5 kg
  • 2-way bi-amplified, bass-reflex design
  • 200mm (8”) LF woofer with 50mm (2”) voice coil, custom made for FBT
  • 25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
  • Frequency response from 65Hz to 20 kHz
  • 80°H x 50°V Constant Directivity Rotatable Horn
  • optional wall bracket mount thread, 35mm (1 3/8”) top-hat
  • one integrated pocket handle
Code: 41212
Configuration: 2 way
Built-in amplifier LF/HF: 700/200 W RMS
Built-in amplifier peak LF/HF: 1400/400 W
Frequency response: 65Hz-20kHz -6dB
Low Frequency woofer: 8 - 2 coil inch
High Frequency driver: 1 - 1.4 coil inch
Maximum SPL cont/peak: 123/131 dB
Dispersion: 80°x50° rotatable HxV
Input impedance: 22 Kohm
AC Power requirements: 640 VA
Input connector: XLR with loop, RCA ST
Power cord: 5/16.4 m/ft
Net Dimension (WxHxD): 274x500x300 / 10.8x19.7x11.8 mm/inch
Net Weight: 15.6/34.39 Kg/lb
Transport Dimension (WxHxD): 395x620x375 / 15.5x24.4x14.7 mm/inch
Transport Weight: 15.3/33.7 Kg/lb
Weight10.00 kg8.00 kg10.00 kg8.00 kg22.00 kg16.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 10.00 kg
Weight 8.00 kg
Weight 10.00 kg
Weight 8.00 kg
Weight 22.00 kg
Weight 16.00 kg