Content |
User's manual - LDSATG2 [4,73 MB] |
|
|
The LD Systems SAT82AG² is an active installation monitor, which provides a convincing performance on a PC or laptop and as a home studio monitor.
The compact 2-way bass reflex design is equipped with an 8" custom-made woofer and a 1" compression driver which are driven by an 80 Watt Class AB power amplifier. The input is a combo socket; an XLR socket is used to loop through the signal. With a frequency response of 50 Hz - 20 kHz and 114 dB maximum sound pressure, the SAT82AG² produces a balanced sound with high dynamics. The monitor features protection circuits for the tweeter against overcurrent, and a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The cabinet of the SAT82G² is made of 12mm MDF with M6 flight points and is available in black or white with a durable textured paint finish. A versatile mounting bracket is included; a universal joint mount is available as an accessory.
- Product Type: installation monitor
- Type: active
- Woofer Size: 8“
- Woofer Size: 203.2 mm
- Woofer Magnet: ferrite
- Woofer Brand: custom-made
- HF Driver Size: 1“
- HF Driver Size: 25 mm
- HF Driver Magnet: ferrite
- HF Driver Brand: custom-made
- Amplifier (A): Class A/B
- Dispersion Angle (H x V): 60° x 60°
- Power Output (RMS): 80 W
- Frequency Response: 50 Hz - 20,000 Hz
- Max SPL: 114 dB
- Protection: overcurrent, HF drivers
- Controls: volume, power switch (on/off), power mode (on/auto)
- Indicators: Power, Overload
- Line Input Connectors: 6.3 mm TRS, XLR
- Line Output Connectors: XLR
- Power Supply: transformer
- Operating Voltage: 220 V AC - 240 V AC, 50 - 60 Hz
- Cabinet Material: 12 mm MDF
- Cabinet Surface: textured coating
- Cabinet Colour: black
- Cabinet Type: bass reflex
- Width: 274 mm
- Height: 410 mm
- Depth: 243 mm
- Features: wall bracket
|
| - PS 08 but active
- Amplifier: 120Wrms (240 Music)
- Balanced MIC + LINE input with level control
- Balanced LINE outputs
- Treble + Bass Master volume control +
Technical Data
- Amplifier power: 120Wrms / 240Wmusic
- Signal / noise rate: 85dB
- Micro input: 1.5mV @ 20kΩ
- Line input: 1V @ 20kΩ
- Tone controls: +/- 12dB @ 100Hz and 10kHz
- Frequency response: 70 - 20,000Hz
- Woofer: 8 "woofer (20cm)
- Compression Driver / Horn: 1 "voice coil
- Nominal dispersion: 90 ° x 60 ° (HxV)
- Mains Input: 115Vac / 60Hz - 230V AC / 50Hz
- Fuse: 250V 3.15A slow blow (20mm glass)
- Dimensions: 402 x 294 x 220 mm
- Weight: 8kg | Features
- Compact and powerful performance
- 1000 Watt peak power Class-D amplifier module
- Easily selected contours for commonly-used applications
- Advanced DSP with Intrinsic Correction™ for superior sound quality and speaker protection
- Directivity Matched Transition™ (DMT) for consistent frequency response across the entire coverage area
- Light weight and highly portable
- Professional appearance looks great in any application
- Use for main PA, stage monitor, or instrument amplifier
- 35 mm pole socket
- Optional yoke, tote, and outdoor cover accessories
- Complete EASE and CAD information available online
Model |
CP8 |
Configuration |
Two-way active loudspeaker |
LF Transducer: |
8 in (203 mm), cone |
HF Transducer: |
1.4 in (35.6 mm) compression driver |
Frequency Response (-6 dB) |
56 - 20 kHz |
Frequency Range (-10 dB) |
53 - 20 kHz |
Nominal Coverage Angle: |
90° Axisymetric |
Maximum Rated SPL1: |
124 dB |
Amplifier: |
Class D
Peak: 800 W (LF), 200 W (HF) |
Controls: |
Power
2 x Gain
Mic Boost Push Switch
6-way Contour Selection Switch |
Indicators: |
Power LED
2 x Input Signal LED
Input B MIC selected LED
Limiter active LED |
Connectors: |
2 x locking XLR/F ¼” combo (Line Input and Mic/Line input)
1 x 3.5 mm TRS (Stereo Input)
1 x XLR/M (Mix Output)
1 x IEC power connector |
AC Power Input: |
Universal power supply 100 – 240 VAC, 50 – 60 Hz |
AC Power Consumption (1/8th Power): |
100 VAC, 0.75A - 240VAC 0.31A |
Enclosure Material: |
Polypropylene |
Attachment Points: |
M8 threaded insert |
Color: |
Black (RAL 9011) |
Grille: |
18 Gauge powder-coated steel |
Dimensions (HxWxD): |
16.2 x 10.7 x 10.1 in
411 x 273 x 256 mm |
Net Weight: |
21.0 lbs (9.5 kg) |
Shipping Weight: |
25.5 lbs (11.4 kg) |
Regulatory: |
EMC, UL, CB |
Optional Accessories: |
CP8 Tote, CP8 Outdoor Cover, CP8 Yoke |
| The days of sacrificing sound system power and performance for portability are over. The JBL EON ONE Compact packs a professional speaker, a full-featured, 4-channel mixer and Bluetooth control into our most compact battery-powered PA, weighing in at just 17.6 pounds. Sound your best in seconds with premium Lexicon and dbx-inspired effects and presets that you can customize right on your phone or tablet using the JBL EON ONE Compact Control app—no engineer needed. Presenters, fitness instructors and emcees will appreciate EON ONE Compact’s ducking feature, which lowers background music volume when speech input is detected. Peer-to-peer Bluetooth lets you broadcast music playback. And with EON ONE Compact’s tool-free, swappable 12-hour battery, you’ll keep the party going long after the sun goes down. Whether you’re a singer/songwriter, DJ, presenter, fitness instructor, or you just want to enjoy amazing sound on the go, get ready to #PlayAnywhere with JBL EON ONE Compact.
Features
- 112 dB output the highest volume in its class
- 8-inch woofer with deep low-frequency performance down to 37.5 Hz
- Ultralight unit weighs just 17.6 pounds (8 kg)
- Set up quickly and easily using JBL EON ONE Compact Control app presets
- Sound your best with professional effects including EQ, reverb, chorus and delay
- Balance your volume levels with built-in 4-channel mixer
- Optimize your sound with 8-band output EQ, customizable via presets
- Stream music from your phone or tablet via Bluetooth to up to four EON One Compact units
- Operate two EON ONE Compact units in stereo mode
- Two pro-grade preamps deliver fuller, richer sound from any microphone
- Connect mics, instruments and playback devices with two XLR/TRS combo jacks, one 1/4-inch hi-Z guitar input and one 3.5mm (1/8-inch) aux input
- Phantom power supports condenser mics
- One-touch ducking feature automatically lowers music volume when speech input is detected, ensuring every word is heard clearly
- Two USB 3.0 ports allow high-speed charging of external devices• Tool-free, swappable battery p provides up to 12 hours of playtime
- Fast battery charging—just 2.5 hours
- Two performance orientations: monitor and vertical; tuning and mixer displays automatically adjust
- Headphone jack allows private monitoring for practice sessions and managing presets
- 1/4-inch passthrough output allows system expansion with additional EON ONE Compact units
- Convenient, built-in tilting tablet stand orients to front or back of system
- Built-in pole mount expands configuration options
- External battery charger option available separately
- Ergonomic handle and even weight distribution make carrying the system a breeze
|
Dedicated PA speaker system for fixed installations 2-way bass-reflex system for powerful bass 20 cm woofer (8“) and 2.5 cm dome tweeter (1“) White or titanium plastic housing (ABS) with metal grille Trapezoidal cabinet for corner installation Movable mounting bracket for ceiling or wall installation Ideal for PA applications in restaurants, bars, discos, shops, conferences, etc. |
Features
400 Watt digital bi-amplification
126 dB max spl
Wide dispersion 90 x 70 constant directivity horn
8" High power neodymium woofer, 2.5" voice coil
1" Mylar dome, neodymium high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 65 Hz ÷ 20 kHz
Max SPL: 126 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 70°
Compression Driver: 1" neo, 1.4" voice coil
Woofer: 8" neo, 2.5" voice coil
Input/Output Section
Input signal: bal/unbal
Input connectors: xlr - Jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1800 Hz
Limiter: Fast limiter, RMS limiter
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Connections: VDE
Cabinet
Cabinet Material: Composite PP
Hardware: 2 x M10 flying points
Handles: 1 on top
Pole Mount/Cap: Yes
Grille: Steel
Colour: Anthracite grey
Physical Specifications
Height: 480/18.9 mm/inch
Width: 291/11.45 mm/inch
Depth: 274/10.7 mm/inch
Net Weight: 9.2/20.28 kg/lbs
|
Reviews
There are no reviews yet.