LD Premium LDSP46K 4-Channel Power Amplifier The LDSP46K is a no-compromise 4-channel power amplifier providing professional performance and versatility in a compact switch mode power supply Class H design. With a massive output of 4x 1.440W into 2Ohms and 2x 2.880 in 4Ohms stereo bridge mode it is an extremely efficient solution for touring and […]
The LDSP46K is a no-compromise 4-channel power amplifier providing professional performance and versatility in a compact switch mode power supply Class H design. With a massive output of 4x 1.440W into 2Ohms and 2x 2.880 in 4Ohms stereo bridge mode it is an extremely efficient solution for touring and installation sound reinforcement weighing in at a mere 8.6kg.
Consistent operation is ensured by the heavy duty construction with high quality components and comprehensive protection circuitry including soft start with turn-on muting, PMS™ power management, SSP™ (Safe operation Sentry Protection) and ICL™ Intelligent Clip Limiting to maintain signal integrity. Protection circuits against DC, thermal and power supply overload are implemented. A switchable subsonic filter and a 3-position gain switch offer variable amplifier adjustment.
The LDSP46K features a full 20Hz – 20kHz bandwidth with low THD and crosstalk, a damping factory higher than 500, excellent S/N ratio and 3 selectable gain/sensitivity levels.
Protection: Soft-start, Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short circuit, Open or mismatched loads, Overloaded power supply, ICL Clip Limiter, PMS, SSP
Controls: On/Off, Volume, Voltage Gain, Dual / Link switchable, Bridge / Stereo configuration switch
The LDSP46K is a no-compromise 4-channel power amplifier providing professional performance and versatility in a compact switch mode power supply Class H design. With a massive output of 4x 1.440W into 2Ohms and 2x 2.880 in 4Ohms stereo bridge mode it is an extremely efficient solution for touring and installation sound reinforcement weighing in at a mere 8.6kg.
Consistent operation is ensured by the heavy duty construction with high quality components and comprehensive protection circuitry including soft start with turn-on muting, PMS™ power management, SSP™ (Safe operation Sentry Protection) and ICL™ Intelligent Clip Limiting to maintain signal integrity. Protection circuits against DC, thermal and power supply overload are implemented. A switchable subsonic filter and a 3-position gain switch offer variable amplifier adjustment.
The LDSP46K features a full 20Hz – 20kHz bandwidth with low THD and crosstalk, a damping factory higher than 500, excellent S/N ratio and 3 selectable gain/sensitivity levels.
Protection: Soft-start, Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short circuit, Open or mismatched loads, Overloaded power supply, ICL Clip Limiter, PMS, SSP
Controls: On/Off, Volume, Voltage Gain, Dual / Link switchable, Bridge / Stereo configuration switch
Model CT475
Product Type Amplifier
Channels 4
Sensitivity 1.4V
Rated Power Output 75W per Channel into 8 ohms
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted 110dB
Total Harmonic Distortion (THD) (full rated power, 20Hz - 20kHz)
Intermodular Distortion (from 0dB down to -40dB)
Frequency Response (at 1W into 4/8 ohms) ± 0.5dB
Crosstalk (below rated power 20Hz to 1kHz) > 70dB
Common Mode Rejection (20Hz to 1kHz) > 55dB, typically > 70dB
Dimension (H x W x D) 1.75" x 19" x 14.25“
Weight 10 lbs (4.5 kg)
Model CT475
Product Type Amplifier
Channels 4
Sensitivity 1.4V
Rated Power Output 75W per Channel into 8 ohms
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted 110dB
Total Harmonic Distortion (THD) (full rated power, 20Hz - 20kHz)
Intermodular Distortion (from 0dB down to -40dB)
Frequency Response (at 1W into 4/8 ohms) ± 0.5dB
Crosstalk (below rated power 20Hz to 1kHz) > 70dB
Common Mode Rejection (20Hz to 1kHz) > 55dB, typically > 70dB
Dimension (H x W x D) 1.75" x 19" x 14.25“
Weight 10 lbs (4.5 kg)
Shipping Weight 15 lbs (6.8 kg)
Top
Model CT475
Product Type Amplifier
Channels 4
Sensitivity 1.4V
Rated Power Output 75W per Channel into 8 ohms
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted 110dB
Total Harmonic Distortion (THD) (full rated power, 20Hz - 20kHz)
Intermodular Distortion (from 0dB down to -40dB)
Frequency Response (at 1W into 4/8 ohms) ± 0.5dB
Crosstalk (below rated power 20Hz to 1kHz) > 70dB
Common Mode Rejection (20Hz to 1kHz) > 55dB, typically > 70dB
Dimension (H x W x D) 1.75" x 19" x 14.25“
Weight 10 lbs (4.5 kg)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
,%2033%20dB%20(70V),%2036%20dB%20(100V)br%20/%20Analog%20Inputs%204,%20electronically%20balanced,%20Phoenix-typebr%20/%20Audio%20Network%20Nobr%20/%20CAN%20Bus%20Interface%20Yes%20(With%20Optional%20RCM-810%20Card)br%20/%20Continuous%20Rated%20Powerbr%20/%20(1%20kHz,%20THD%201%)%20100v%201000%20Wattsbr%20/%20Continuous%20Rated%20Powerbr%20/%20(1%20kHz,%20THD%201%)%202Ω%201000%20Wattsbr%20/%20Continuous%20Rated%20Powerbr%20/%20(1%20kHz,%20THD%201%)%204Ω%201000%20Wattsbr%20/%20Continuous%20Rated%20Powerbr%20/%20(1%20kHz,%20THD%201%)%2070v%201000%20Wattsbr%20/%20Continuous%20Rated%20Powerbr%20/%20(1%20kHz,%20THD%201%)%208Ω%20500%20Wattsbr%20/%20Continuous%20Rated%20Powerbr%20/%20(20-20%20kHz,%20THD%20Continuous%20Rated%20Powerbr%20/%20(20-20%20kHz,%20THD%20Continuous%20Rated%20Powerbr%20/%20(20-20%20kHz,%20THD%20Continuous%20Rated%20Powerbr%20/%20(20-20%20kHz,%20THD%20Cooling%20Front-to-Rear,%20continuously%20variable%20fansbr%20/%20DIM%2030%200.02%20%br%20/%20Electronics%20Type%20Amplifierbr%20/%20Frequency%20Response%2015%20Hz-30%20kHzbr%20/%20Input%20Impedance%20(Balanced)%2020%20kΩbr%20/%20Input%20Sensitivity%200%20dBu%20(.775V)-2%20Ω,%20+3%20dBu%20(1.1V)-4/8%20Ω,%20+6%20dBu%20(1.55)%2070V/100Vbr%20/%20Intermodulation%20Distortion%20(SMPTE)%200.05%20%br%20/%20Mains%20Voltage%20220%20-%20240%20V,%2050%20-%2060%20Hz%20or%20120%20V,%2050%20-%2060%20Hz,%2050%20-%2060%20Hzbr%20/%20Network%20Control%20(IRIS-Net)%20Optionalbr%20/%20Total%20Harmonic%20Distortion%200.05%20%br%20/%20Variable%20Load%20Drive%20(VLD)%20Yesbr%20/%20Height%202RU%2088.1%20mm%20(3.47“)br%20/%20Width%20483%20mm%20(19.02“)br%20/%20Depth%20421.5%20mm%20(16.59“)br%20/%20Weight%20Net%2011.1%20kg%20(24.47%20lbs)%20/p%20p%20img%20border= "aposirsi_electrovoice")
Reviews
There are no reviews yet.