LD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone

108.04 incl. GR VAT

Available on backorder

EAN: 4049521087370
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: LDWS1000MW Category:
Battery disposal information [77,1 KB] Frequency lists / Pin assignment Wireless Systems [538,9 KB]

 

Read more

LDWS1000MW User User’s manual [7,20 MB]
LDWS1000MW Battery disposal informationLDWS1000MW Frequency listLDWS1000MW Frequency lists / Pin assignment Wireless SystemsLDWS1000MW Data sheet - Microphone for Brass/Wind/Percussioninstruments Wind / percussion instrument clip microphone

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

Specifications:

  • Converter Principle: Electret Condenser Microphone
  • Pick-up Pattern: Cardioid pattern
  • Frequency Response: 50 Hz – 18 kHz
  • SPL: 133 dB
  • Sensitivty: -45 dB +/- 3dB
  • Impedance: 250 Ohms +/- 30% @1kHz
  • Connections: Mini XLR – 3 pins
  • Gooseneck: 70 mm
  • Cable length: 1,5 m
  • Surface: Black matt
  • Weight: 56 g
  • Accessories: Wind protection, Phantom power adapter
Weight 0.35 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSHURE Beta-56a - Snare-Tom Microphone 50Hz to 16kHz removeNPG CB-410 Instrument Microphone 48V removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz removeAKG C 414-XLII/ST Matched Pair removeSHURE Beta98HC - clip on condenser instrument mic remove
NameLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSHURE Beta-56a - Snare-Tom Microphone 50Hz to 16kHz removeNPG CB-410 Instrument Microphone 48V removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz removeAKG C 414-XLII/ST Matched Pair removeSHURE Beta98HC - clip on condenser instrument mic remove
ImageSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz
SKULDWS1000MWBETA 56ACB-410BETA57AC 414-XLII STBETA98H/C
Rating
Price 108.04 incl. GR VAT 196.80 incl. GR VAT 47.11 incl. GR VAT 175.00 incl. GR VAT 2,100.00 incl. GR VAT 241.91 incl. GR VAT
Stock

Available on backorder

Only 1 left in stock (can be backordered)

In stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityAvailable on backorderOnly 1 left in stock (can be backordered)In stockOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content LDWS1000MW User User's manual [7,20 MB]
LDWS1000MW Battery disposal informationLDWS1000MW Frequency listLDWS1000MW Frequency lists / Pin assignment Wireless SystemsLDWS1000MW Data sheet - Microphone for Brass/Wind/Percussioninstruments Wind / percussion instrument clip microphone

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

Specifications:
  • Converter Principle: Electret Condenser Microphone
  • Pick-up Pattern: Cardioid pattern
  • Frequency Response: 50 Hz – 18 kHz
  • SPL: 133 dB
  • Sensitivty: -45 dB +/- 3dB
  • Impedance: 250 Ohms +/- 30% @1kHz
  • Connections: Mini XLR – 3 pins
  • Gooseneck: 70 mm
  • Cable length: 1,5 m
  • Surface: Black matt
  • Weight: 56 g
  • Accessories: Wind protection, Phantom power adapter

 

NEW Wider mounting base capable of accommodating a larger range of microphone stands. Even works with the LP Claw.

Specifically engineered for drum and instrument applications, the Beta 56A's compact, pivoting design makes it the ideal choice for these applications.

Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.

  • Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
  • Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
  • Compact design reduces stage clutters
  • Hardened steel mesh grille resists wear and abuse
  • Neodymium magnet for high signal-to-noise ratio output
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Frequency response: 50 to 16,000 Hz

Type: Black Electret Condenser
Polar Pattern: Uni-Directional
Frequency: 50Hz-16KHz
Sensitivity: -45dB
Output Impedance: 250 Ohm
Mixer Phantom Power: +48V
Ideal for wind & string  musical instruments
Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. The Beta 57A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. A completely new grille design lets you take better advantage of proximity effect. The Beta 57A is an exceptionally versatile microphone. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.
  • Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
  • Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
  • Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
  • Neodymium magnet for high signal-to-noise ratio output
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Frequency response: 50 to 16,000 Hz
Suggested Applications Guitar Amp Bass Amp Acoustic Guitar Brass/Saxophone Snare Drums Rack/Floor Toms Congas Woodwinds Lead Vocals

Complete With Stereo Bar, Windshield's and Cradle'

The C 414 B-XL II/ST is especially useful for stereo recordings taken from the far field with the inclusion of useful and often valuable room acoustics. The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 300 Hz to 8,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.

Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.

The kit comes complete in an all-metal 'Soundtool' Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens, an H50 stereo bar and an individually-measured chart showing the response curve of the microphone. See www.dv247.com Alternative Products and Related Products on this page for your options.

The C 414B-XLII has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. A classic microphone with a distinctive timbre especially designed for recording of solo vocals and solo instruments.

Whats the difference between the C 414B-XLII and the C 414 B XLS? The main difference between the two current C414 models lies in their frequency responses. The C 414B-XLII has a series of presence rises between 2.5 KHz and 9 KHz. This will make any recording with this microphone brighter or more sibilant than the original sound. This upper mid range boost is quite helpful on vocals and certain instruments such as classical acoustic guitars using nylon or natural strings. The C 414B XLS, see www.dv247.com Alternative Products on this page, has a very flat response that will not color the original sound which is important especially in instrumental recordings. It more suited for general use.

The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid wide cardioid, hyper cardioid and figure-eight patterns. The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds. On the rear of the microphone, an electronic switch allows the selection of -6, -12 and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414B-XLII has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6 dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A.

The C 414B-XLII has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems.

Features:

  • High sensitivity and extremely low self noise
  • Five switchable polar patterns for placement and application flexibility
  • Two-color LEDs provide quick visual indication of selected polar pattern and output overload
  • Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration
  • Supplied with Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens and an H50 stereo bar
  • High sound pressure level capability, 140 - 158dB, and wide dynamic range
  • Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage
  • Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication
  • All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions

Specifications:

  • Type: 1" large diaphragm pressure gradient microphone
  • Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
  • Frequency Range: 20 to 20,000 Hz
  • Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
  • Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
  • Preattenuation Pad: -6, -12,-18 dB, switchable
  • Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
  • Impedance: = 2,200 ohms
  • Supply voltage: 48 V phantom power to DIN/IEC
  • Current consumption: Approximately 4.5 mA
  • Dynamic range: 134 dB minimum
  • Environment Temperature range: -10° C to +60° C (14° F to 140° F)
  • Relative humidity: 95% (+20° C/68° F), 85% (+60° C/140° F)
  • Connector: 3-pin XLR to IEC
  • Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
  • Net weight 300 g (10.6 oz.)

 

A high performance mini-condenser for sound reinforcement and recording. Great for instruments or drums. The ultra-uniform pickup pattern provides high gain before feedback and excellent rejection of unwanted noise.

Other features include:

  • Mew A98D flexible drum mount
  • SPL handling to 160dB
  • frequency response of 20 to 20,000Hz and included preamplifier
  • shock mount and windscreen
Weight0.35 kg0.80 kg1.00 kg0.50 kg2.00 kg0.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.35 kg
Weight 0.80 kg
Weight 1.00 kg
Weight 0.50 kg
Weight 2.00 kg
Weight 0.20 kg