| Content | User's manual [5,41 MB]
LD Systems zone 423 2-Zone-Mixer
The ZONE 423 is a full featured zone mixer with 4 line and 2 microphone channels, that can be assigned to a master and a zone output, as well as inputs for an external emergency announcement system and remote-controlled switching mute. Through versatile connectivity, the compact 2U rack device is the perfect control centre for PA systems in food outlets, clubs, hotels, fitness centres, and is also excellent for presentations and DJs.
In addition to the two balanced microphone inputs with variable Gain and Talkover level,12V-phantom power, and a shared 3-Band-EQ, the ZONE 423 offers Line, Phono-, and Aux-stereo connections in RCA format, a FOH-input with balanced stereo jack plugs as well as a USB and 3.5mm mini jack. The USB-port is used as a stereo input and output and allows the mixer to be used as an external audio interface. The four input channels have individual gain controls with signal and peak value display, 45 mm faders for adjusting the volume and cue buttons.
The master and zone sections each have their own EQ, balanced XLR and unbalanced RCA outputs: the master output via terminal block connectors and the zone output using a mono sum switch, and 100 Hz high-pass filter. The stereo level indication can be set to master or zone, and the maximum output level can be preset for both on the back of the mixer. In addition to an adjustable headphone connection for pre-listening, the ZONE 423 also has a recording output.
- Type: stereo
- Number of Zones: 2 (Master, Zone)
- Installation Height: 2U
- Total Input Channels: 6 (2x Mic, 1x Line/Aux, 2x Line/Phono, 1x Line/FOH)
- Frequency Response: 20 - 40.000 Hz
- Microphone Channels: 2 (with phantom power 12 V)
- Microphone Channel Connections: 6.3 mm stereo jack (balanced), XLR / 6.3 mm jack (Combo)
- Microphone Channel Controls: Gain, On/Off, 1 x EQ Hi, 1 x EQ Low, 1 x Talkover, 1 x Talkover Level
- Microphone Channels Display Elements: On-LED
- Microphone Channels Input Impedance: 4 kOhm
- Microphone Channels Input Sensitivity: 8 mV
- Microphone Channels THD: 0,07 %
- Line Channels: 4 (Input 1: USB/Line, Input 2 + 3: Line/Phono/CD, Input 4: Line/FOH)
- Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack + USB, input 2 + 3: 4 x RCA, input 4: 4 x RCA + 2 x 6.3 mm jack
- Line Channel Controls: Gain, Source, Cue, Level, Enable FOH
- Line Channel Display Elements: Signal/0 dB-LED, Cue-LED
- Line Channel Input Impedance: 6 Kohm (Phono 60 kOhm)
- Line Channels Input Sensitivity: 1 V (Phono 10 mV)
- Line Channels THD: 0,03 % (Phono 0,05 %)
- input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
- Line Outputs: 3 (Master - Stereo, Zone - Stereo/Mono, Rec - Stereo)
- Output Connectors Master: 2 x XLR (balanced), RCA (2 x), Terminal Block
- Master Controls: Level, EQ HI, EQ Mid, EQ Low, Max. Level
- Master Display Elements: 2 x 10 segment level meter (switchable Master/Zone)
- Master Output Levels: 21 dBu (balanced), 18 dBu (unbalanced)
- Zone Output Connections: 2 x XLR (balanced), RCA (2 x), Terminal Block
- Zone Controls: Level, Source Input 2 - 4/Mix, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Mono
- Zone Display Elements: 2 x 10 segment level meter (switchable Master/Zone)
- Zone Output Levels: 21 dBu (balanced), 18 dBu (unbalanced)
- Output Connections Rec: 2 x RCA
- Headphone Output: 1
- Headphone Out Port: 6.3 mm jack stereo
- Headphone Output Controls: Cue Volume
- Headphone Output Voltage: 1,2 V 32 Ohm
- Additional Inputs: 2 (Emergency Input, Output Mute)
- Connections Additional Inputs: Terminal Block
- Additional Input Controls: Level Emergency Input
- Input Sensitivity Emergency Input: 5 V
- Additional Controls: power switch
- Operating Voltage: 220 - 250 V AC, 50 Hz
- Power Socket: IEC power socket
- Power Consumption (max.): 22 W
- Fuse: T 500 mAL / 250 V
- Dimensions (W x H x D): 483 x 89 x 210 mm
- Accessories Included: terminal blocks, power cable, operating instructions
| The MA125 is a very compact, professional PA mixing amplifier for commercial and industrial applications. The MA125 can drive 8 Ohm or constant voltage loudspeakers. The MA125 has 4 microphone inputs with integrated speech filters, 4 selectable line inputs and one emergency line / telephone input. MIC input 1 is meant to be the main microphone paging input. Its signal can be fed via the front jack or via the XLR3, DIN5 or Euroblock connector at the back. When needed, two APart paging microphones (MIC-PAT-D) can be wired in parallel on each microphone input.
The MA125 has a 3-level priority system. The emergency line / telephone input at the back has the highest priority. MIC1 has the second priority level and the third priority level can be activated by a dry contact at the back of the amplifier. This dry contact mutes all background music inputs. It also activates the integrated chime. The level of the chime can be adjusted at the back of the amplifier. Activation of the dry contact, releases a 24V output power? this can be used to switch the relays of loudspeaker attenuators or other devices. When needed the signals mixed via your MA125 mixing amplifier can be recorded or distributed via the record output. Further the MA125 is supplied with detachable 19” brackets.
The MA125 is the device to built professional industrial applications. You can insert an extra EQ (such as the APart PXQ2215) into the signal path or add extra power amps (e.g. PA240P), using the pre-amp out / power amp in RCA connectors. | The Compact 9.2 1U installation mixer is built to combine maximum audio possibilities and needs for a pub, school, or public area without scarifying on the ease of use. The user can adjust 3 microphone levels and 2 line levels. Both line levels have 6 selectable input sources which are shown on a clear display. On each line input it is possible to select a pre-programmed label which is shown on the display, so there is no need to do difficult programing. This will help users to select the desired source for the desired area, because the Compact 9.2 also has 2 individual zones. All gain, EQ, phantom power and technical settings are on the backside. Once the installer has set everything correctly the user doesn't need to worry about difficult settings, only volume and source select are available on the front panel. The front panel also has a special input if you like to connect a device instantly. This input can be switched between line and phone mode. The phone mode adjusts the input sensitivity into the correct value for MP3 players, smartphones or tablets. Now you can playback your MP3 devices directly without signal loss. The Compact 9.2 is the perfect solution for situations where non-technical users need to operate professional audio systems.
Specifications
Input channels: 3 x Microphone, combo XLR/Jack
6 x Line, RCA
1 x Phone, 3,5mm jack
Output channels: 2 x Master Balanced, XLR
Master EQ: 80Hz, 2,5KHz, 12KHz, -6dB / +6dB
Frequency response: 20Hz - 20Khz
T.H.D.: |
LD Systems ZONE 622 2-Zone Mixer
The ZONE 622 is a particularly compact 1U zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The device has all the essential functions, an input for an external emergency announcement system with its own volume control, and a connection to the remote-controlled switching mute. The ZONE 622 is suitable as a sound system for separate zones in restaurants, clubs, hotels, fitness centres, and for presentations.
The two balanced microphone channels with stereo jack inputs are equipped with controls for Gain, Talkover volume, Talkover attenuation, 12V phantom power and a shared 2-band EQ. The line channels 1 and 2 can also be used to connect unbalanced microphones, and channel 6 is specially designed for balanced FOH signals. The stereo input channels of the ZONE 622 have a Cue button and volume control signal display, and the channels 1-5 have an additional gain trimmer. Furthermore, the zone mixer has a 3.5 mm mini jack input and a USB port , that is used as a Stereo Input and Output (Recording Out). So you can use the ZONE 622 as an external audio interface.
The stereo and mono output sections have their own meters, 2-band EQ, trimmer for adjusting the maximum output level, as well as electronically balanced jack plugs and terminal block connectors. In addition, the stereo section has unbalanced RCA jacks. An adjustable headphone jack for previewing and a recording output complete the equipment for the ZONE 622.
Product type
Mixers
Type
Installations
Number of Zones
2 (Master, Zone)
Type
stereo
Installation Height
1 U
Total Input Channels
8 (2x Mic, 2x Mic/Line, 3x Line, 1x FOH)
Frequency response
20 - 40000 Hz
Microphone channels
2 (with phantom power 12 V)
Microphone Channel Connections
6.3 mm stereo jack (balanced)
Microphone channel controls
1 x EQ Hi , 1 x EQ Low , 1 x Talk Over Damp , 1 x Talk Over Level , Gain , On / Off
Microphone Channels Display Elements
On-LED
Microphone Channels Input Impedance
4 kOhm
Microphone Channels Input Sensitivity
6.1 mV
Microphone Channels THD
0.08%
Line / Microphone Channels
2
Line / microphone input connectors
2 x RCA , 3.5 mm stereo jack (input 1) , 6.3 mm stereo jack (balanced)
Line / microphone channel controls
Cue , level , mic/lline , Trim
Line / Microphone Display Elements
Cue-LED , Signa-LED
Line Channels
3
Line input connectors
Input 3-4: 2 x RCA , Input 5: 2 x RCA + USB
Line Channel Controls
Cue , level , Trim
Line Channel Display Elements
Cue-LED , Signa-LED
Line Channel Input Impedance
4 kOhm
Line Channels Input Sensitivity
1.5 V
Line Channels THD
0.03%
input sensitivity AUX/Line
3 V
FOH Channels
1
FOH Input Connections
6.3 mm stereo jack (2 x balanced)
FOH Input Controls
Cue , level
FOH Input Display Elements
Cue-LED , Signa-LED
Line outputs
3 (Master - Stereo, Zone - Mono, Rec - Stereo)
Output Connectors Master
6.3 mm stereo jack (2 x balanced) , RCA (x2) , terminal block
Master Controls
EQ Hi , EQ Low , level , Max. Level
Master Display Elements
5-Segment Level Meter
Master Output Levels
(balanced) 24 dBu , (unbalanced) 18 dBu
Zone Output Connections
6.3 mm stereo jack (balanced) , terminal block
Zone Controls
EQ Hi , EQ Low , level , Max. Level , Source Input 1-5/Mix
Zone Display Elements
5-Segment Level Meter
Zone Output Levels
24 (balanced/ unbalanced) dBu
Output Connections Rec
2 x RCA
Headphones ouput
1
Headphone Out Port
6.3 mm TRS
Headphone Output Controls
Cue Volume
Headphone Output Voltage
(@ 32 Ohm) 1.25 V
Additional Inputs
2 (Emergency Input, Output Mute)
Connections Additional Inputs
terminal block
Additional Input Controls
Level Emergency Input
Additional Controls
power switch
Additional Display Elements
Power-LED
Operating voltage
220 - 250 V AC, 50 Hz
Mains connector
IEC power connector
Power consumption
18 W
Fuse
T 500 mAL / 250 V
Width
485 mm
Height
44 mm
Depth
179 mm
Weight
2,4 kg
Accessories (included)
Power cord , terminal blocks
|
The JBL Commercial CSM-21 offers fixed I/O, pre-configured architecture, full stereo or mono operation, flexible routing and control of multiple audio sources, simple front-panel configuration and control without the need for a computer, compatibility with the CSR wall controllers, compatibility with the CSPM paging microphones, and optional duplication of audio channels to another device via a Cat5 cable. The CSM-21 features two stereo music inputs with gain control and clip LEDs, and one stereo output with an active crossover and a dedicated subwoofer output. |
The JBL Commercial CSM-32 offers fixed I/O, pre-configured architecture, full stereo or mono operation, flexible routing and control of multiple audio sources, simple front-panel configuration and control without the need for a computer, compatibility with the CSR wall controllers, compatibility with the CSPM paging microphones, and optional duplication of audio channels to another device via a Cat5 cable. The CSM-32 features three stereo music inputs with gain control and clip LEDs, and two stereo outputs with active crossovers and dedicated subwoofer outputs. |
Reviews
There are no reviews yet.