LD SYSTEMS LDZONE624 ZONE 624 – 19″ 4-Zone Mixer 3U

433.83 incl. GR VAT

In stock

EAN: 4049521154355
Installments calculation
Submit Better Price
LD Systems ZONE 624 4-Zone Mixer The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote-controlled switching mute. Due to its extensive […]

 

Read more

LD Systems ZONE 624 4-Zone Mixer

The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote-controlled switching mute. Due to its extensive connectivity the ZONE 624 is the extremely flexible control centre solution for PA systems in food outlets, clubs, hotels, fitness centres, and many other areas.

The two balanced microphone inputs have a shared 3-band EQ, 12V phantom power and Talkover functions; the Talkover attenuation can be individually set for all zone outputs on the back of the unit. The 6 stereo input channels of the ZONE 624 are equipped with gain control, signal and peak LEDs, 45 mm faders, Cue buttons and RCA connections; channel 6, in addition with balanced TRS inputs for FOH signals. The device also has a switchable Aux input via 3.5mm mini jack and a USB port, that is used as a stereo input and output (recording out) and turns the ZONE 624 into an external audio interface.

The master section outputs are electronically balanced and use XLR connectors and terminal block connectors. The stereo zone also has unbalanced RCA connectors. The maximum output level for all of the zones can be individually set. The three mono outputs of the ZONE 624 each have a 2-band EQ, a selectable 100 Hz high pass filter, and a MIC mute switch with a level indicator; the inputs 1-6 or the stereo master signal can be selected as a source. The stereo output is equipped with a 3-band EQ, a control for the Talkover sensitivity and two LED chain level meters. Furthermore, the ZONE 624 has a recording output and a controllable PFL headphone jack for previewing.

  • Type: stereo
  • Number of Zones: 4 (Master, Zone A-C)
  • Installation Height: 3U
  • Total Input Channels: 8 (2x Mic, 1x AUX/Line, 2x Phono/Line, 2x Line, 1x FOH/Line
  • Frequency Response: 20 – 40.000 Hz
  • Microphone Channels: 2 (with phantom power 12 V)
  • Microphone Channels Connections: 2X 6.3 mm jack (balanced), 1x XLR / 6.3 mm jack (Combo)
  • Microphone Channel Controls: 2x Gain, 2x On/Off, 1 x EQ Hi, 1x EQ Mid, 1 x EQ Low, 1x Talkover
  • Microphone Channels Display Elements: On-LED
  • Microphone Channels Input Impedance: 4 kOhm
  • Microphone Channels Input Sensitivity: 4.5 mV
  • Microphone Channels THD: 0,08 %
  • Line Channels: 6 (Input 1: Aux/Line, Input 2 + 5: Line/Phono, Input 3: USB/Line  4: Line, Input 6: Line/FOH
  • Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack, input 2.4 5: 2 x RCA, input 3: 2 x RCA, input 6: 4 x RCA + 2 x 6.3 mm jack
  • Line Channel Controls: Gain, AUX enable, Cue, Level, 2x Phono/Line, FOH On
  • Line Channels Display Elements: Signal/0 dB-LED, Cue-LED
  • Line Channel Input Impedance: 6 Kohm (Phono 50 kOhm)
  • Line Channels Input Sensitivity: 2,1 V (Phono 25 mV)
  • Line Channels THD: 0,02 % (Phono 0,05%)
  • input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
  • Line Outputs: 5 (Master – Stereo, 3x Zone – Mono, Rec – Stereo)
  • Master Output Connectors: 2 x XLR (balanced), RCA (2 x), Terminal Block
  • Master Controls: Level, EQ Hi, EQ Mid, EQ Low, Max. Level, T/O Sensitivity, T/O Damping
  • Master Display Elements: 2 x 10 segment level meter
  • Master Output Levels: 24 dBu (balanced), 17 dBu (unbalanced)
  • Zone Output Connections: XLR (balanced), Terminal Block
  • Zone Controls: Level, Source, Cue, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Include Mic, T/O Damp
  • Zone Display Elements: 5-segment level meter
  • Zone Output Levels: 24 dBu (balanced/ unbalanced)
  • Output Connections Rec: 2 x RCA
  • Headphone Output: 1
  • Headphone Out Port: 6.3 mm jack stereo
  • Headphone Output Controls: Cue Volume
  • Headphone Output Voltage: 2,5 V 32 Ohm
  • Additional Inputs: 2 (Emergency Input, Output Mute)
  • Additional Input Connections: Terminal Block
  • Additional Input Controls: Level Emergency Input
  • Emergency Input Sensitivity: 5 V
  • Additional Controls: power switch
  • Additional Display Elements: Power-LED
  • Operating Voltage: 220 – 250 V AC, 50 Hz
  • Power Socket: IEC power socket
  • Power Consumption (max.): 25 W
  • Fuse: T 500 mAL / 250 V
  • Dimensions (W x H x D): 485 x 132 x 210 mm
  • Accessories included: terminal blocks, power cable, operating instructions
Weight 6.40 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS LDZONE624 ZONE 624 – 19″ 4-Zone Mixer 3U”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsLD SYSTEMS LDZONE624 ZONE 624 - 19" 4-Zone Mixer 3U removeBEHRINGER HPM1000 CLOSED-EAR DESIGN HEADPHONES SILVER removeAPART MA 200 Mixer Amplifier 100V/200W removeOMNITRONIC EM-650 Multifunctional 5+2-channel mixer with 3 zones removeAPART REVAMP 4120T Digital Power Amplifier 100V 4 x 120W removeAPART REVAMP-1680 Power Amplifier 16x80W remove
Imagehpm1000 behringer headphones closed silver
SKULDZONE624E005303H06AP00010EM-650H06AP00022H06AP00019
Rating
Price 433.83 incl. GR VAT 10.91 incl. GR VAT 808.00 incl. GR VAT 472.00 incl. GR VAT 1,196.00 incl. GR VAT 1,698.00 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

In stock

In stock

AvailabilityIn stockIn stockIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

LD Systems ZONE 624 4-Zone Mixer

The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote-controlled switching mute. Due to its extensive connectivity the ZONE 624 is the extremely flexible control centre solution for PA systems in food outlets, clubs, hotels, fitness centres, and many other areas.

The two balanced microphone inputs have a shared 3-band EQ, 12V phantom power and Talkover functions; the Talkover attenuation can be individually set for all zone outputs on the back of the unit. The 6 stereo input channels of the ZONE 624 are equipped with gain control, signal and peak LEDs, 45 mm faders, Cue buttons and RCA connections; channel 6, in addition with balanced TRS inputs for FOH signals. The device also has a switchable Aux input via 3.5mm mini jack and a USB port, that is used as a stereo input and output (recording out) and turns the ZONE 624 into an external audio interface.

The master section outputs are electronically balanced and use XLR connectors and terminal block connectors. The stereo zone also has unbalanced RCA connectors. The maximum output level for all of the zones can be individually set. The three mono outputs of the ZONE 624 each have a 2-band EQ, a selectable 100 Hz high pass filter, and a MIC mute switch with a level indicator; the inputs 1-6 or the stereo master signal can be selected as a source. The stereo output is equipped with a 3-band EQ, a control for the Talkover sensitivity and two LED chain level meters. Furthermore, the ZONE 624 has a recording output and a controllable PFL headphone jack for previewing.

  • Type: stereo
  • Number of Zones: 4 (Master, Zone A-C)
  • Installation Height: 3U
  • Total Input Channels: 8 (2x Mic, 1x AUX/Line, 2x Phono/Line, 2x Line, 1x FOH/Line
  • Frequency Response: 20 - 40.000 Hz
  • Microphone Channels: 2 (with phantom power 12 V)
  • Microphone Channels Connections: 2X 6.3 mm jack (balanced), 1x XLR / 6.3 mm jack (Combo)
  • Microphone Channel Controls: 2x Gain, 2x On/Off, 1 x EQ Hi, 1x EQ Mid, 1 x EQ Low, 1x Talkover
  • Microphone Channels Display Elements: On-LED
  • Microphone Channels Input Impedance: 4 kOhm
  • Microphone Channels Input Sensitivity: 4.5 mV
  • Microphone Channels THD: 0,08 %
  • Line Channels: 6 (Input 1: Aux/Line, Input 2 + 5: Line/Phono, Input 3: USB/Line  4: Line, Input 6: Line/FOH
  • Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack, input 2.4 5: 2 x RCA, input 3: 2 x RCA, input 6: 4 x RCA + 2 x 6.3 mm jack
  • Line Channel Controls: Gain, AUX enable, Cue, Level, 2x Phono/Line, FOH On
  • Line Channels Display Elements: Signal/0 dB-LED, Cue-LED
  • Line Channel Input Impedance: 6 Kohm (Phono 50 kOhm)
  • Line Channels Input Sensitivity: 2,1 V (Phono 25 mV)
  • Line Channels THD: 0,02 % (Phono 0,05%)
  • input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
  • Line Outputs: 5 (Master - Stereo, 3x Zone - Mono, Rec - Stereo)
  • Master Output Connectors: 2 x XLR (balanced), RCA (2 x), Terminal Block
  • Master Controls: Level, EQ Hi, EQ Mid, EQ Low, Max. Level, T/O Sensitivity, T/O Damping
  • Master Display Elements: 2 x 10 segment level meter
  • Master Output Levels: 24 dBu (balanced), 17 dBu (unbalanced)
  • Zone Output Connections: XLR (balanced), Terminal Block
  • Zone Controls: Level, Source, Cue, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Include Mic, T/O Damp
  • Zone Display Elements: 5-segment level meter
  • Zone Output Levels: 24 dBu (balanced/ unbalanced)
  • Output Connections Rec: 2 x RCA
  • Headphone Output: 1
  • Headphone Out Port: 6.3 mm jack stereo
  • Headphone Output Controls: Cue Volume
  • Headphone Output Voltage: 2,5 V 32 Ohm
  • Additional Inputs: 2 (Emergency Input, Output Mute)
  • Additional Input Connections: Terminal Block
  • Additional Input Controls: Level Emergency Input
  • Emergency Input Sensitivity: 5 V
  • Additional Controls: power switch
  • Additional Display Elements: Power-LED
  • Operating Voltage: 220 - 250 V AC, 50 Hz
  • Power Socket: IEC power socket
  • Power Consumption (max.): 25 W
  • Fuse: T 500 mAL / 250 V
  • Dimensions (W x H x D): 485 x 132 x 210 mm
  • Accessories included: terminal blocks, power cable, operating instructions
Behringer HPM1000 The HPM1000 multi-purpose headphones provide semi-pro-level users with an incredible performance unheard of in this price category. They feature an ultra-wide frequency response, high dynamic range, a high-resolution capsule and oval-shaped ear cups with a comfortable headband. Features: Ultra-wide frequency response High dynamic range High-resolution capsule Single-sided cord Oval-shaped ear cups Comfortable headband Technical data: Frequency response: 20 Hz - 20 kHz Max. power handling: 100 mW Impedance: 32 Ohm Sensitivity: 105 dB @ 1 kHz Cord length: 2.0 m Connector: ?" TRS stereo jack

With the MA200 mixing amplifier series, the APart engineering team has created some unique, original and above all, complete electronics. Never before has a mixer amplifier had all the features to meet a contractors demand for nearly every application.

  • The most important features:
  • 200 watt 100 Volt mixing amplifier
  • 4 mic inputs (phantom via internal switch)
  • Mic inputs have integrated speech filters and are high-class transistor balanced
  • 4 Line inputs
  • 4 Loudspeaker output zones can be selected (switch on/off) and have LED indication. Zone 4: selection of "Music only”, "microphone only” or both music and microphone.
  • Bass-treble tone control
  • Master volume control
  • 3-Level priority system: 
- 1. Emergency input: directly to the power amplifier (vol adjustable)
- 2. VOX Mute: Voice activated mute (adjustable) on MIC input 1 mutes all other inputs
- 3. Contact closure mutes all line inputs
  • LED indication on front pannel when line inputs are muted
  • 24V ouput power is activated via contact closure. Can be used to switch the 24V priority
  • relays of volume controls.
  • Integrated 2-tone chime has an adjustable volume and is activated by contact closure
  • Build-in dynamic limiter (-3dB)
  • Record output via RCA
  • PRE AMP OUT - AMP IN makes it possible to insert an external signal processor or to add
  • 3 zones with routing facility of all input channels as desired
  • 5 input channels with recessed gain controls on the rear panel, signal LED and super smooth dual-rail channel faders
  • 2 microphone channels with level control, LED level meter, 3-way equalizer and talkover button
  • Talkover level and response time adjustable
  • Pre-fader listening (CUE) to the stereo input channels via adjustable headphone output
  • Color illuminated rotary controls and rubber buttons
  • Zone outputs with level control, 3-way equalizer and 10-digit stereo LED level meter
  • 2 record outputs (independent of the master channels) with routing facility of all zone outputs as desired
  • Inputs: 8 x line (stereo RCA), 2x line/phono (stereo RCA), switchable; 2 x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
  • Outputs: 3 x master (optionally 3-pin XLR or stereo RCA) and 2 x record (stereo RCA)
  • Operation via supplied power unit
  • Rack installation, 2 U
  • Ideal for restaurants, bars, theme parks, hotels and all applications where microphones need to be mixed with music (e.g. karaoke)
Power supply:230 V AC, 50 Hz ~,
 via supplied power unit
Power consumption:60 W
Inputs:
Microphone 1,2:combined XLR/6.3 mm jack (1/4“) (bal.)
Minimum input voltage:1 mV RMS
Line 1-8, Aux 1,2:stereo RCA
Minimum input voltage:150 mV RMS
Phono 1,2:stereo RCA
Minimum input voltage:3 mV RMS
Outputs:
Master 1-3:stereo RCA, stereo XLR
Output voltage:0.75 V/1.5 V RMS (switchable)
Record:stereo RCA
Output voltage:0.75 V RMS
Headphones:6.3 mm stereo jack (min. 8 ohms)
Tone control (microphone 1,2; zone 1-3):
5x High:-12 dB to +12 dB/ 10 kHz
5x Mid:-12 dB to +12 dB/ 1 kHz
5x Low:-12 dB to +12 dB/ 100 Hz
Talkover attenuation:-15 dB
S/N ratio: >65 dB
Frequency range:20-20,000 Hz
Distortion:0.03 %
Dimensions (WxHxD):483 x 117 x 90 mm (19“, 2 U)
Weight:2.5 kg

REVAMP4120T is a professional 4-channel digital power amplifier with 4 x 120 watts output power @ 100 volt (or @ 4 ohms), but the unit is also bridgeable to 2 x 240 watts @ 100 volt (or @ 4 ohms). The unit incorporates a high efficient SMPS power supply, outputs with efficient Class D output topology and output transformers.

REVAMP4120T is the ideal amplifier for applications with 4 zones in mono, 2 zones in stereo or even bridged dual mono or bridged stereo systems. This amplifier contains an intelligent variable speed cooling fan that only will be activated in case of emergency. In order to match each input to its respective source the input sensitivity can be adapted to your needs. The input stage also features a build-in 250 Hz HP-filter to optimise the system for use on horn speakers whenever you would need this. Each pair of outputs can be bridged to give you 2 x 240 watts of output power!

The very intuitive front display shows what is going on with one blink of an eye. The output power is constantly under control thanks to our own made limiter that prevents annoying pumping limiter sound but yet keeps the system fully under control and you still have that dynamic sound. Ease of use, high-tech, reliability and a wide versatility has never been as cleverly combined as in this REVAMP4120T amplifier.

REVAMP1680 is a professional 16-channel digital power amplifier with 16 x 80 watts output power @ 4 ohms, but the unit is also bridgeable to 8 x 160 watts @ 8 ohms. This 3 rack units high amplifier with very high channel separation also has a dual analog power supply with toroidal power transformers. The standby power consumption is very low, less than 0.5 watts!

 

 

Another smart feature of the REVAMP1680 is the switching mode standby power supply with multiple auto power on/off options. You can power on or power off the unit via a trigger input, audio sense... The trigger input is ideal when you want to switch on the power amplifier automatically using an external AC or DC trigger signal coming from your audio system. The amplifier will be switched on as long as the trigger voltage is present. Alternatively, you can set the power on mode switch to the audio trig position: the amp will automatically switch on when a sufficiently strong audio signal is present at the input and automatically switch off after a few minutes of silence.

 

 

This amplifier is equipped with 2 stereo bus inputs with pass through. These bus inputs are ideal when you want to hear the same audio signal in different output zones with the advantages you need less audio cables and the installation can be done very fast.

 

 

With its very low standby consumption and the fact the amplifier can easily be integrated in any audio project, the REVAMP1680 will soon become your favourite multi channel power amplifier.

Weight6.400.504.002.5012.006.00
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.40 kg
Weight 0.50 kg
Weight 4.00 kg
Weight 2.50 kg
Weight 12.00 kg
Weight 6.00 kg