LD SYSTEMS LDZONE624 ZONE 624 – 19″ 4-Zone Mixer 3U

433.83 incl. GR VAT

In stock

EAN: 4049521154355
Installments calculation
CompareAdd to wishlist Submit Better Price
LD Systems ZONE 624 4-Zone Mixer The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote-controlled switching mute. Due to its extensive […]

 

Read more

LD Systems ZONE 624 4-Zone Mixer

The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote-controlled switching mute. Due to its extensive connectivity the ZONE 624 is the extremely flexible control centre solution for PA systems in food outlets, clubs, hotels, fitness centres, and many other areas.

The two balanced microphone inputs have a shared 3-band EQ, 12V phantom power and Talkover functions; the Talkover attenuation can be individually set for all zone outputs on the back of the unit. The 6 stereo input channels of the ZONE 624 are equipped with gain control, signal and peak LEDs, 45 mm faders, Cue buttons and RCA connections; channel 6, in addition with balanced TRS inputs for FOH signals. The device also has a switchable Aux input via 3.5mm mini jack and a USB port, that is used as a stereo input and output (recording out) and turns the ZONE 624 into an external audio interface.

The master section outputs are electronically balanced and use XLR connectors and terminal block connectors. The stereo zone also has unbalanced RCA connectors. The maximum output level for all of the zones can be individually set. The three mono outputs of the ZONE 624 each have a 2-band EQ, a selectable 100 Hz high pass filter, and a MIC mute switch with a level indicator; the inputs 1-6 or the stereo master signal can be selected as a source. The stereo output is equipped with a 3-band EQ, a control for the Talkover sensitivity and two LED chain level meters. Furthermore, the ZONE 624 has a recording output and a controllable PFL headphone jack for previewing.

  • Type: stereo
  • Number of Zones: 4 (Master, Zone A-C)
  • Installation Height: 3U
  • Total Input Channels: 8 (2x Mic, 1x AUX/Line, 2x Phono/Line, 2x Line, 1x FOH/Line
  • Frequency Response: 20 – 40.000 Hz
  • Microphone Channels: 2 (with phantom power 12 V)
  • Microphone Channels Connections: 2X 6.3 mm jack (balanced), 1x XLR / 6.3 mm jack (Combo)
  • Microphone Channel Controls: 2x Gain, 2x On/Off, 1 x EQ Hi, 1x EQ Mid, 1 x EQ Low, 1x Talkover
  • Microphone Channels Display Elements: On-LED
  • Microphone Channels Input Impedance: 4 kOhm
  • Microphone Channels Input Sensitivity: 4.5 mV
  • Microphone Channels THD: 0,08 %
  • Line Channels: 6 (Input 1: Aux/Line, Input 2 + 5: Line/Phono, Input 3: USB/Line  4: Line, Input 6: Line/FOH
  • Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack, input 2.4 5: 2 x RCA, input 3: 2 x RCA, input 6: 4 x RCA + 2 x 6.3 mm jack
  • Line Channel Controls: Gain, AUX enable, Cue, Level, 2x Phono/Line, FOH On
  • Line Channels Display Elements: Signal/0 dB-LED, Cue-LED
  • Line Channel Input Impedance: 6 Kohm (Phono 50 kOhm)
  • Line Channels Input Sensitivity: 2,1 V (Phono 25 mV)
  • Line Channels THD: 0,02 % (Phono 0,05%)
  • input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
  • Line Outputs: 5 (Master – Stereo, 3x Zone – Mono, Rec – Stereo)
  • Master Output Connectors: 2 x XLR (balanced), RCA (2 x), Terminal Block
  • Master Controls: Level, EQ Hi, EQ Mid, EQ Low, Max. Level, T/O Sensitivity, T/O Damping
  • Master Display Elements: 2 x 10 segment level meter
  • Master Output Levels: 24 dBu (balanced), 17 dBu (unbalanced)
  • Zone Output Connections: XLR (balanced), Terminal Block
  • Zone Controls: Level, Source, Cue, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Include Mic, T/O Damp
  • Zone Display Elements: 5-segment level meter
  • Zone Output Levels: 24 dBu (balanced/ unbalanced)
  • Output Connections Rec: 2 x RCA
  • Headphone Output: 1
  • Headphone Out Port: 6.3 mm jack stereo
  • Headphone Output Controls: Cue Volume
  • Headphone Output Voltage: 2,5 V 32 Ohm
  • Additional Inputs: 2 (Emergency Input, Output Mute)
  • Additional Input Connections: Terminal Block
  • Additional Input Controls: Level Emergency Input
  • Emergency Input Sensitivity: 5 V
  • Additional Controls: power switch
  • Additional Display Elements: Power-LED
  • Operating Voltage: 220 – 250 V AC, 50 Hz
  • Power Socket: IEC power socket
  • Power Consumption (max.): 25 W
  • Fuse: T 500 mAL / 250 V
  • Dimensions (W x H x D): 485 x 132 x 210 mm
  • Accessories included: terminal blocks, power cable, operating instructions
Weight 6.40 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS LDZONE624 ZONE 624 – 19″ 4-Zone Mixer 3U”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD SYSTEMS LDZONE624 ZONE 624 - 19" 4-Zone Mixer 3U removeINTER-M V-500 VIDEO MATRIX SYSTEM removeBIAMP MA-125 Mixer Amplifier 125W 100V removeRane AM2 Automixer removeINTER-M Z-500 ZONE OUTPUT SELECTOR removeLD SYSTEMS LDZONE423 ZONE 423 - 19" 2-Zone Mixer 2U remove
NameLD SYSTEMS LDZONE624 ZONE 624 - 19" 4-Zone Mixer 3U removeINTER-M V-500 VIDEO MATRIX SYSTEM removeBIAMP MA-125 Mixer Amplifier 125W 100V removeRane AM2 Automixer removeINTER-M Z-500 ZONE OUTPUT SELECTOR removeLD SYSTEMS LDZONE423 ZONE 423 - 19" 2-Zone Mixer 2U remove
ImageAM2
SKULDZONE624V-500H06AP00001134.401Z-500LDZONE423
Rating
Price 433.83 incl. GR VAT 570.69 incl. GR VAT 499.00 incl. GR VAT891.45 incl. GR VAT 1,668.00 incl. GR VAT 390.60 incl. GR VAT
Stock

In stock

In stock

In stock

Available on backorder

In stock

Only 1 left in stock (can be backordered)

AvailabilityIn stockIn stockIn stockAvailable on backorderIn stockOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionThe Rane AM2 is both an 8 channel, gain-sharing automatic mic mixer and simultaneously a Rane RAD. Use it as a standalone mic-only mixer, add more gain-shared mics using up to seven additional AM2 Automixers, and/or use the RAD Port to transport the mic mix to Rane's HAL system
ContentLD Systems ZONE 624 4-Zone Mixer The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote-controlled switching mute. Due to its extensive connectivity the ZONE 624 is the extremely flexible control centre solution for PA systems in food outlets, clubs, hotels, fitness centres, and many other areas. The two balanced microphone inputs have a shared 3-band EQ, 12V phantom power and Talkover functions; the Talkover attenuation can be individually set for all zone outputs on the back of the unit. The 6 stereo input channels of the ZONE 624 are equipped with gain control, signal and peak LEDs, 45 mm faders, Cue buttons and RCA connections; channel 6, in addition with balanced TRS inputs for FOH signals. The device also has a switchable Aux input via 3.5mm mini jack and a USB port, that is used as a stereo input and output (recording out) and turns the ZONE 624 into an external audio interface. The master section outputs are electronically balanced and use XLR connectors and terminal block connectors. The stereo zone also has unbalanced RCA connectors. The maximum output level for all of the zones can be individually set. The three mono outputs of the ZONE 624 each have a 2-band EQ, a selectable 100 Hz high pass filter, and a MIC mute switch with a level indicator; the inputs 1-6 or the stereo master signal can be selected as a source. The stereo output is equipped with a 3-band EQ, a control for the Talkover sensitivity and two LED chain level meters. Furthermore, the ZONE 624 has a recording output and a controllable PFL headphone jack for previewing.
  • Type: stereo
  • Number of Zones: 4 (Master, Zone A-C)
  • Installation Height: 3U
  • Total Input Channels: 8 (2x Mic, 1x AUX/Line, 2x Phono/Line, 2x Line, 1x FOH/Line
  • Frequency Response: 20 - 40.000 Hz
  • Microphone Channels: 2 (with phantom power 12 V)
  • Microphone Channels Connections: 2X 6.3 mm jack (balanced), 1x XLR / 6.3 mm jack (Combo)
  • Microphone Channel Controls: 2x Gain, 2x On/Off, 1 x EQ Hi, 1x EQ Mid, 1 x EQ Low, 1x Talkover
  • Microphone Channels Display Elements: On-LED
  • Microphone Channels Input Impedance: 4 kOhm
  • Microphone Channels Input Sensitivity: 4.5 mV
  • Microphone Channels THD: 0,08 %
  • Line Channels: 6 (Input 1: Aux/Line, Input 2 + 5: Line/Phono, Input 3: USB/Line  4: Line, Input 6: Line/FOH
  • Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack, input 2.4 5: 2 x RCA, input 3: 2 x RCA, input 6: 4 x RCA + 2 x 6.3 mm jack
  • Line Channel Controls: Gain, AUX enable, Cue, Level, 2x Phono/Line, FOH On
  • Line Channels Display Elements: Signal/0 dB-LED, Cue-LED
  • Line Channel Input Impedance: 6 Kohm (Phono 50 kOhm)
  • Line Channels Input Sensitivity: 2,1 V (Phono 25 mV)
  • Line Channels THD: 0,02 % (Phono 0,05%)
  • input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
  • Line Outputs: 5 (Master - Stereo, 3x Zone - Mono, Rec - Stereo)
  • Master Output Connectors: 2 x XLR (balanced), RCA (2 x), Terminal Block
  • Master Controls: Level, EQ Hi, EQ Mid, EQ Low, Max. Level, T/O Sensitivity, T/O Damping
  • Master Display Elements: 2 x 10 segment level meter
  • Master Output Levels: 24 dBu (balanced), 17 dBu (unbalanced)
  • Zone Output Connections: XLR (balanced), Terminal Block
  • Zone Controls: Level, Source, Cue, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Include Mic, T/O Damp
  • Zone Display Elements: 5-segment level meter
  • Zone Output Levels: 24 dBu (balanced/ unbalanced)
  • Output Connections Rec: 2 x RCA
  • Headphone Output: 1
  • Headphone Out Port: 6.3 mm jack stereo
  • Headphone Output Controls: Cue Volume
  • Headphone Output Voltage: 2,5 V 32 Ohm
  • Additional Inputs: 2 (Emergency Input, Output Mute)
  • Additional Input Connections: Terminal Block
  • Additional Input Controls: Level Emergency Input
  • Emergency Input Sensitivity: 5 V
  • Additional Controls: power switch
  • Additional Display Elements: Power-LED
  • Operating Voltage: 220 - 250 V AC, 50 Hz
  • Power Socket: IEC power socket
  • Power Consumption (max.): 25 W
  • Fuse: T 500 mAL / 250 V
  • Dimensions (W x H x D): 485 x 132 x 210 mm
  • Accessories included: terminal blocks, power cable, operating instructions

*8 Input 6BUS 21Out Channel Video Matrix Switch

*Select 8 Videos Input/6BUS Video Input

*Select 8 Channel Video Input/6BUS Video Input

*6BUS Video Links Output

*21 Zone Videos Output

*RS-422C Post: Select C-500 BUS Output

*RS-232C Post: Select Z-500 Video Output

*Power Source: DC 24V

*Weight: 3kg/6.6Ib

*Dimensions(W×H×D): 482×88×380mm/19×3.5×15in

The MA125 is a very compact, professional PA mixing amplifier for commercial and industrial applications. The MA125 can drive 8 Ohm or constant voltage loudspeakers. The MA125 has 4 microphone inputs with integrated speech filters, 4 selectable line inputs and one emergency line / telephone input. MIC input 1 is meant to be the main microphone paging input. Its signal can be fed via the front jack or via the XLR3, DIN5 or Euroblock connector at the back. When needed, two APart paging microphones (MIC-PAT-D) can be wired in parallel on each microphone input. The MA125 has a 3-level priority system. The emergency line / telephone input at the back has the highest priority. MIC1 has the second priority level and the third priority level can be activated by a dry contact at the back of the amplifier. This dry contact mutes all background music inputs. It also activates the integrated chime. The level of the chime can be adjusted at the back of the amplifier. Activation of the dry contact, releases a 24V output power? this can be used to switch the relays of loudspeaker attenuators or other devices. When needed the signals mixed via your MA125 mixing amplifier can be recorded or distributed via the record output. Further the MA125 is supplied with detachable 19” brackets. The MA125 is the device to built professional industrial applications. You can insert an extra EQ (such as the APart PXQ2215) into the signal path or add extra power amps (e.g. PA240P), using the pre-amp out / power amp in RCA connectors.Χαρακτηριστικά:Inputs:Gain-Sharing Automatic Mic Mixing Eight XLR Inputs with Level controls & Sig/OL indicators Each can be Mic, Mic with 48V phantom, or Line-level Add up to 64 more gain-sharing inputs by cascading AM2 Automixers Add other audio sources, line inputs and remote controls by connecting to HAL systemOutputs (all mono)XLR Main with Mic/Line switch, Level control & Sig/OL Rane RAD and Cascade IN RJ-45 Ports Cascade In Port connects up to seven additional Rane AM2 mixers, (eight units total) RAD Port may send Output to HAL (DSP/control). It is possible to cascade the AM2 mix into Halogen's Gain-Sharing Auto Mixer or Room Combine Processor DSP, so that all mics connected to HAL may gain-share

*6 Input 21 Output Matrix

*Allocate BGM Source to Desired Output Zone

*Clear LED/LCD Visual Display Shows Status of Each Area/Zone

*Interface for Remote Zone Controllers L-500(21 Zones)

*Interface for Remote Paging Microphones RM-500(4 No.)

*Adoption of RS-422/RS-232 Communication Method Supporting Long Distance

*Conveient Connection with 7-Ch Power AMP with Adoption of Lump-sum Output terminal

*Power Source: DC 24V

*Weight: 4.3kg/9.5Ib

*Dimensions(W×H×D): 482×132×380mm/19×5.2×15in

User's manual [5,41 MB] LD Systems zone 423 2-Zone-Mixer The ZONE 423 is a full featured zone mixer with 4 line and 2 microphone channels, that can be assigned to a master and a zone output, as well as inputs for an external emergency announcement system and remote-controlled switching mute. Through versatile connectivity, the compact 2U rack device is the perfect control centre for PA systems in food outlets, clubs, hotels, fitness centres, and is also excellent for presentations and DJs. In addition to the two balanced microphone inputs with variable Gain and Talkover level,12V-phantom power, and a shared 3-Band-EQ, the ZONE 423 offers Line, Phono-, and Aux-stereo connections in RCA format, a FOH-input with balanced stereo jack plugs as well as a USB and 3.5mm mini jack. The USB-port is used as a stereo input and output and allows the mixer to be used as an external audio interface. The four input channels have individual gain controls with signal and peak value display, 45 mm faders for adjusting the volume and cue buttons. The master and zone sections each have their own EQ, balanced XLR and unbalanced RCA outputs: the master output via terminal block connectors and the zone output using a mono sum switch, and 100 Hz high-pass filter. The stereo level indication can be set to master or zone, and the maximum output level can be preset for both on the back of the mixer. In addition to an adjustable headphone connection for pre-listening, the ZONE 423 also has a recording output.
  • Type: stereo
  • Number of Zones: 2 (Master, Zone)
  • Installation Height: 2U
  • Total Input Channels: 6 (2x Mic, 1x Line/Aux, 2x Line/Phono, 1x Line/FOH)
  • Frequency Response: 20 - 40.000 Hz
  • Microphone Channels: 2 (with phantom power 12 V)
  • Microphone Channel Connections: 6.3 mm stereo jack (balanced), XLR / 6.3 mm jack (Combo)
  • Microphone Channel Controls: Gain, On/Off, 1 x EQ Hi, 1 x EQ Low, 1 x Talkover, 1 x Talkover Level
  • Microphone Channels Display Elements: On-LED
  • Microphone Channels Input Impedance: 4 kOhm
  • Microphone Channels Input Sensitivity: 8 mV
  • Microphone Channels THD: 0,07 %
  • Line Channels: 4 (Input 1: USB/Line, Input 2 + 3: Line/Phono/CD, Input 4: Line/FOH)
  • Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack + USB, input 2 + 3: 4 x RCA, input 4: 4 x RCA + 2 x 6.3 mm jack
  • Line Channel Controls: Gain, Source, Cue, Level, Enable FOH
  • Line Channel Display Elements: Signal/0 dB-LED, Cue-LED
  • Line Channel Input Impedance: 6 Kohm (Phono 60 kOhm)
  • Line Channels Input Sensitivity: 1 V (Phono 10 mV)
  • Line Channels THD: 0,03 % (Phono 0,05 %)
  • input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
  • Line Outputs: 3 (Master - Stereo, Zone - Stereo/Mono, Rec - Stereo)
  • Output Connectors Master: 2 x XLR (balanced), RCA (2 x), Terminal Block
  • Master Controls: Level, EQ HI, EQ Mid, EQ Low, Max. Level
  • Master Display Elements: 2 x 10 segment level meter (switchable Master/Zone)
  • Master Output Levels: 21 dBu (balanced), 18 dBu (unbalanced)
  • Zone Output Connections: 2 x XLR (balanced), RCA (2 x), Terminal Block
  • Zone Controls: Level, Source Input 2 - 4/Mix, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Mono
  • Zone Display Elements: 2 x 10 segment level meter (switchable Master/Zone)
  • Zone Output Levels: 21 dBu (balanced), 18 dBu (unbalanced)
  • Output Connections Rec: 2 x RCA
  • Headphone Output: 1
  • Headphone Out Port: 6.3 mm jack stereo
  • Headphone Output Controls: Cue Volume
  • Headphone Output Voltage: 1,2 V 32 Ohm
  • Additional Inputs: 2 (Emergency Input, Output Mute)
  • Connections Additional Inputs: Terminal Block
  • Additional Input Controls: Level Emergency Input
  • Input Sensitivity Emergency Input: 5 V
  • Additional Controls: power switch
  • Operating Voltage: 220 - 250 V AC, 50 Hz
  • Power Socket: IEC power socket
  • Power Consumption (max.): 22 W
  • Fuse: T 500 mAL / 250 V
  • Dimensions (W x H x D): 483 x 89 x 210 mm
  • Accessories Included:    terminal blocks, power cable, operating instructions
 
Weight6.40 kg3.60 kg9.00 kg1 kg4.30 kg3.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.40 kg
Weight 3.60 kg
Weight 9.00 kg
Weight 1 kg
Weight 4.30 kg
Weight 3.30 kg