The ultra compact MAUI 5 weighs in at less than 11 kg while delivering 800 watts of peak power and a maximum SPL of 120 dB. Providing both sound reinforcement with extended coverage and feedback resistant monitoring the subwoofer base and 3-piece column system assembles in seconds with custom multipin connectors. The junior member of […]
The ultra compact MAUI 5 weighs in at less than 11 kg while delivering 800 watts of peak power and a maximum SPL of 120 dB. Providing both sound reinforcement with extended coverage and feedback resistant monitoring the subwoofer base and 3-piece column system assembles in seconds with custom multipin connectors. The junior member of the MAUI family is most easily portable and fits onto any car seat.
Protection Circuits: DSP-based multiband limiter, overvoltage, short circuit, overcurrent
Cooling System: convection
Controls: Sub Level, MP3/Hi-Z Level, Main Level, Line Level, Mic Level, BT Level, BT Pairing Button
Display Elements: Signal, On, Limit, Protect
Power Supply: switching power supply
Operating Voltage: 100 V AC - 120 V AC / 50 - 60 Hz, 200 V AC - 240 V AC, 50 - 60 Hz (automatic adjustment)
Line Inputs: 2 x stereo
Line Input Connectors: XLR, 6.3 mm jack
Mic Inputs: 1
Mic Input Connectors: XLR, 6.3 mm jack
MP3 Inputs: 1
MP3 Input Connectors: 3.5 mm jack
Hi-Z Inputs: 1
Hi-Z Input Connectors: 6.3 mm jack
Speaker Outputs: 1
Speaker Output Connections: custom-made multi-pin
DSP Features
Word Length AD / DA Converter: 24 / 24 Bit
Internal Sampling Frequency: 48 kHz
LD Systems STINGER G3 GALA SET 2 x double 8" passive PA Speaker + 2 x 18" passive Subwoofer + Amping Rack
Including a pair of slim, low-profile satellites and two subwoofers, this set is a great option for events that require excellent speech intelligibility and extended coverage. We recommend this set for the following type of application: gala events, corporate conferences. The STINGER G3 GALA SET is suitable for audiences of up to 350* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 28 G3 – 28” Passive loudspeaker
2 x STINGER SUB 18 G3 – 18” Passive subwoofer
1 x DSP 45K RACK – Power amplifier with DSP
2 x STINGER 28 G3 PC – Padded protective cover for loudspeaker
2 x STINGER SUB 18 G3 PC – Padded protective cover for subwoofer
2 x STINGER SUB 18 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment.
General
Product type
PA system
Type
Passiv
System output (RMS):
2.400 W
Frequency response
35 - 20,000 Hz
Dispersion (H x V)
90 x 50°
Weight
156 kg
LD Systems DSP 45 K RACK 4-Channel DSP Power Amplifier and Patchbay in 19" Rack Case
Product type
PA Complete Systems Accessories
Material
birch multiplex
Type
castor boards
Material thickness
15 mm
Surface
Polyurea
Color
Black
Number of casters
4
Wheel diameter
100 mm
Manufacturer of castors
Adam Hall
number of drag castors
2
Length
650 mm
Width
540 mm
Weight
7 kg
LD Systems STINGER SUB 18 G3 PC Padded protective Cover for Stinger® G3 Subwoofer 18"
Product type
PA loudspeaker
Type
Passive
Low/mid driver dimensions
2 x 8 "
Woofer size
2 x 203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF driver size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50 °
Load rating (RMS)
400 W
Peak power
800 W
Frequency response
58 - 20000 Hz
SPL (1W/1m)
99 dB
Max. SPL
125 dB
Impedance
8 Ohm(s)
Protection circuits
HF Driver
Speakers per amplifier channel (DSP44/45K)
3
Cabinet material
12 mm Plywood
Width
270 mm
Height
756 mm
Depth
290 mm
Weight
19,3 kg
LD Systems STINGER SUB 18 G3 CB Dolly Board for Stinger G3 Subwoofer 18" Models
Product type
PA subwoofer
Low/mid driver dimensions
18 "
Woofer size
457.2 mm
Woofer magnet
Ferrite
Woofer voice coil
4 "
Woofer voice coil (mm)
101.6 mm
Impedance
8 Ohm(s)
Loudspeaker inputs
1
Load rating (RMS)
800 W
Speaker input connections
Speakon compatible
Loudspeaker outputs
1
Speaker output connections
Speakon compatible
Peak power
1600 W
Frequency response
35 - Crossover Hz
Cabinet surface
Polyurea
Cabinet construction
Bass Reflex
SPL (1W/1m)
100 dB
Max. SPL
129 dB
Depth
740 mm
Speakers per amplifier channel (DSP44/45K)
2
Cabinet material
18 mm Plywood
Width
677 mm
Height
547 mm
Weight
40,6 kg
LD Systems STINGER 28 G3 Passive 2 x 8" 2-way bass-reflex PA Loudspeaker
Product type
PA Subwoofer Accessories
Color
Black
Material
Nylon 1680D
Type
Covers
Thickness of the padding
8 mm
Depth
625 mm
Width
567 mm
Height
470 mm
Weight
1,5 kg
LD Systems STINGER SUB 18 G3 18” Passive Bass Reflex PA Subwoofer
Product type
Power Amplifiers
Type
19" / 3 HE
Weight
17,9 kg
LD Systems STINGER 28 G3 PC Padded protective Cover for Stinger® G3 PA Loudspeaker 2 x 8"
Product type
Protective cover
Material
Nylon 1680D
Height
750 mm
Width
290 mm
Depth
310 mm
Weight
0,65 kg
MAUI 11 G2 W Portable Column PA System with Mixer and Bluetooth white
A complete sound system that you can carry together with your instrument: introducing the MAUI 11 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as a PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 11 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed after years of experience in the design of the column systems as a user-friendly solution for small to medium-sized gigs and fixed installations.
The MAUI 11 G2 is equipped with three 6.5" woofers, eight 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier boasting 1,000 watts of peak power and producing a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides top-class performance each time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way-crossover with run time correction.
The design of the MAUI 11 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer or DJ, you will be thrilled with the extraordinary sound and portability of the MAUI 11 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 11 G2 is a well thought out overall solution, down to the last details.
General
Weight
24,9 kg
Product type
PA Complete Systems
Type
active
Color
white
Max. SPL (peak)
124 dB
Frequency response
50 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Overall height
2030 mm
Woofer characteristics
Low/mid driver dimensions
3 x 6.5 "
Woofer size
3 x 165.1 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
1.5 "
Woofer voice coil (mm)
38.1 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Subwoofer width
285 mm
Subwoofer height
650 mm
Subwoofer depth
373 mm
Subwoofer weight
16.9 kg
Mid/Hi System
Midrange size
8 x 3 "
Midrange size
8 x 76.2 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1 "
Midrange voice coil
25.4 mm
Horn
Waveguide
Tweeter dimensions
2 x1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Neodymium
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Loudspeaker inputs
1
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
Aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
620 / 730 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.4 / 2.6 kg
Amplifier module (integrated in subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
500 W
Amplifier output system (peak)
1000 W
Protection circuits
DC protection, Multiband limiter, short circuit, thermal overload
Cooling
Convection
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch, Hi-Z Level, Line level, Main level, Mono/stereo switch, MP3/Bluetooth Level, Power, Sub level
Indicators
Limit, mono, On, Protect (protection circuit engaged), Setup, Signal, stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
The new LD Systems DAVE 8XS is a portable 2.1 multimedia system with a high-performance 8" band pass subwoofer and two satellites (each 4" + 1“, with silk dome).
The system provides crystal-clear sound and was specifically designed for multimedia applications such as home PA or gaming; it is also suitable as a monitor for DJs or keyboardists or as a music system for smaller venues such as bars and cafés. The high-performance A/B amplifier built into the subwoofer provides for both the subwoofer and the satellites. The multimedia system LD DAVE 8XS has line inputs in XLR and RCA format and is equipped with all standard protections. The built-in limiter keeps the system safe from overload and ensures a long service life. On the side of the subwoofer, in addition to an ON/OFF switch and a phase reverse switch (180°), there is a separate subwoofer volume knob that allows you to find the perfect mix of brilliant treble, punchy mids, and powerful bass.
From serial number 130818000001, the satellite speakers are equipped with a 16 mm flange and are therefore compatible with the speaker stands from LDDAVE8SET2.
Product type
PA Complete Systems
Colour
Black
Max. SPL (continuous)
117 dB
Frequency response
45 - 19.000 Hz
Dispersion (H x V)
60 x 60 °
Weight
29 kg
Subwoofer
Low/mid driver dimensions
8 "
Woofer size
203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Cabinet construction
Bandpass
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Subwoofer width
352 mm
Subwoofer height
430 mm
Subwoofer depth
434 mm
Mid/Hi System
Midrange size
2 x 4 "
Midrange size
2 x 101.6 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Mid/Hi system impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Speakon compatible
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
12 mm MDF
Mid/Hi system cabinet surface
texture paint
Mid/Hi system width
144 mm
Mid/Hi system height
350 mm
Mid/Hi system depth
170 mm
Mid/Hi system features
16 mm flange , 2 x M6 mounting points for wall mounting
LD Systems STINGER G3 EVENT SET A 2 x 10" powered PA Speaker + 2 x 15" powered Subwoofer
This set is the perfect all-round package for small to medium-sized gigs and functions providing a tight and punchy low end from the two subwoofers. We recommend this set for the following type of application: DJ, small bands and more. The STINGER G3 EVENT SET A is suitable for audiences of up to 300* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 10 A G3 – 10” Powered loudspeaker
2 x STINGER SUB 15 A G3 – 15” Powered subwoofer
2 x STINGER 10 G3 PC – Padded protective cover for loudspeaker
2 x STINGER SUB 15 G3 PC – Padded protective cover for subwoofer
2 x STINGER SUB 15 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment
General
Product type
PA system
Type
Powered
System output (RMS):
1.500 W
Frequency response
40 - 20,000 Hz
Dispersion (H x V)
90 x 50°
Weight
91,782 kg
LD Systems STINGER SUB 15 G3 PC Padded protective Cover for STINGER® G3 Subwoofer 15"
Product type
PA Complete Systems Accessories
Material
birch multiplex
Type
castor boards
Material thickness
15 mm
Surface
Polyurea
Color
Black
Number of casters
4
Wheel diameter
100 mm
Manufacturer of castors
Adam Hall
number of drag castors
2
Length
624 mm
Weight
6 kg
LD Systems STINGER SUB 15 G3 CB Dolly Board for Stinger G3 Subwoofer 15" Models
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
10 "
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF driver size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50 °
RMS
300 W
Peak power
600 W
Frequency response
65 - 20000 Hz
Max. SPL (peak)
127 dB
Protection circuits
thermal overload
Input sensitivity
-9 dBu
Controls
2 x Mic/Line
Indicators
Mic
Line input connectors
XLR
Line outputs
1
Operating voltage
Switching power supply
Cabinet material
12 mm Plywood
Monitor angle
54 °
Width
325 mm
Height
527 mm
Depth
318 mm
Weight
12,7 kg
LD Systems STINGER 10 A G3 Active 10" 2-way bass-reflex PA Loudspeaker
Product type
PA Loudspeakers Accessories
Material
Nylon 1680D
Height
530 mm
Width
350 mm
Depth
320 mm
Weight
0,5 kg
LD Systems STINGER 10 G3 PC Padded protective cover for Stinger® G3 PA Loudspeaker 10"
Product type
PA subwoofer
Type
Powered
Low/mid driver dimensions
15 "
Woofer size
381 mm
Woofer magnet
Ferrite
Woofer voice coil
3 "
Woofer voice coil (mm)
76.5 mm
Amplifier
Class D
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
RMS
450 W
Peak power
900 W
Frequency response
40 - Low-Pass Hz
Line inputs
2
Line input connectors
XLR
Line output connectors
XLR
Max. SPL (peak)
133 dB
Protection circuits
short circuit
Power consumption (max.)
600 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet surface
Polyurea
Cabinet construction
Bass Reflex
Controls
Mode
Depth
624 mm
Indicators
Signal
Line outputs
2
Operating voltage
SMPS
Cabinet material
18 mm Plywood
Height
477 mm
Weight
31,9 kg
LD Systems STINGER SUB 15 A G3 Active 15" bass-reflex PA subwoofer
Product type
PA Subwoofer Accessories
Color
Black
Material
Nylon 1680D
Type
Covers
Thickness of the padding
8 mm
Depth
625 mm
Width
567 mm
Height
470 mm
Weight
1,191 kg
400-watt, portable PA system with 8-channel powered mixer, two 8" speakers, a Bluetooth® input, SPX digital reverbs, an onboard feedback suppressor and versatile EQ.
Spacifications :
400W (200W + 200W) power output
High quality speakers (LF:8" woofer/ HF:1" voice coil compression driver)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User´s manual
Reviews
There are no reviews yet.