| Content | LD Systems MIX 6 A G3 Active 2-Way Loudspeaker with Integrated 4-Channel Mixer
The ideal choice for small-scale PA and personal monitoring applications, the active LD MIX 6 A G3 integrates a 4-channel mixer and Class D amplification with 2 x 280 watts peak power. The compact bass reflex loudspeaker features a 6.5" custom woofer and 1" HF driver complement, 80 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering crystal clear sound with punch and detail.
Accomodating a wide variety of input sources including electric instruments, smartphones, tablets, MP3 and CD players, the built-in mixer provides 3 microphone channels and a stereo line channel with 2-band EQ each plus switchable hi-Z input and 15 V phantom power. The output section includes a 3-band master EQ for overall tone shaping, 4-segment LED metering, an adjustable monitor and RCA recording outputs. In addition, the LD MIX 62 A G3 sports a DSP with 16 effect presets, limiter and overcurrent, overload, short circuit and thermal protection. A 4 ohm slave output allows powering the passive LD MIX 6 G3 for a dual speaker setup.
The rigid MDF enclosure features two 16 mm pole mounts for horizontal or vertical orientation. On its own or in tandem with the passive unit, the LD MIX 62 A G3 provides amazing performance and versatility in a lightweight, easily portable package.
Product type
PA loudspeaker
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Dispersion (H x V)
80 x 70 °
Frequency response
80 - 20.000 Hz
Amplifier output (RMS)
2x70 W
Amplifier output (peak)
2x280 W
Protection circuits
ICL (Intelligent Clip Limiting), over-current, overload, short circuit, thermal overload
MIXER
Mic inputs
6.3 mm jack, XLR
Controls for Mic Inputs
DFX Send, EQ Hi, EQ Low, Hi-Z Switch (channel 1 only), level
Input Impedance Mic Inputs
14 kOhm
Input Sensitivity Mic Input
70 mV
Line input connectors
2 x RCA
Controls Line Inputs
DFX Send, EQ Hi, EQ Low, level
Input Impedance Line Inputs
4.4 kOhm
Input Sensitivity Line Inputs
- 5 dBu
Hi-Z input connectors
6.3 mm jack
Input Impedance Hi-Z Input Connectors
100 kOhm
Connector Type Monitor Line Output
2 x RCA
Controls for Monitor Line Output
Monitor Volume
Max Output Level Line Output Monitor
28 dBu
Connector Type Record Output
2 x RCA
Increased power main output (at 4 ohm)
70 W
DSP Digital Effect
DSP Number of Programs
16
DSP Controls
DFX Return, Mute switch
DSP Display Elements
Peak LED
Main Section
Main section controls
EQ Hi, EQ Low, EQ Mid, Master Volume, Phantom Power, voltage selector switch
Main section indicators
4-segment Level Meter, power LED
Mains connector
IEC socket
Operating voltage
transformer
Operating voltage
110 - 120 V ~ 50/60 Hz or 220 - 240 V ~ 50/60 Hz, switchable
Cabinet
Cabinet construction
Bass Reflex
Cabinet surface
texture paint
Other features
2 x 16 mm pole mount socket, rubber feet
| YAMAHA Stagepas 600 BT Portable PA System
680-watt, portable PA system with 10-channel powered mixer, two 10" speakers, a Bluetooth® input, SPX digital reverbs, an onboard feedback suppressor and versatile EQ.
680-watt, portable PA system with 10-channel powered mixer, two 10" speakers, a Bluetooth® input, SPX digital reverbs, an onboard feedback suppressor and versatile EQ.
Specifications:
- 680W (340W + 340W) power output
- High quality speakers (LF:10" woofer/ HF:1.4" voice coil compression driver)
- Detachable 10-channel mixer (4 mono/line + 6 mono / 3 stereo line)
- Bluetooth® audio streaming
- 1-Knob Master EQ™ with virtual bass boost
- High resolution SPX digital reverbs (4 types, parameter control)
- Onboard feedback suppressor
- Great-sounding 3-band channel EQ
- Switchable stereo/ mono inputs
- Hi-Z (high impedance) inputs
- Phantom power
- Monitor and Subwoofer outputs
- Optional reverb footswitch
| (Speakers): |
x 2 |
| Τype: |
2 passive speakers |
| Woofer: |
10" (25 cm) cone |
| Cone: |
1.4" (3.56 cm) voice coil compression driver |
| Enclosure: |
Two-way bass-relfex speakers |
| Frequency Range: |
55 Hz - 20 kHz |
| Dimensions: |
Speaker 33,5 x 54,5 x 31,9 cm. |
| Weight: |
2 x Speakers 10.9 kg |
| Type: |
Powered mixer |
| Power: |
680W (340 W + 340 W) (Dynamic), 560W (280W + 280W) (Continuous) |
| Inputs/Outputs: |
4 mono mic / line + 4 mono / 2 stereo line - Speakers Out(L, R), Monitor Out(L/MONO, R), Subwoofer Out (MONO) with auto HPF |
| Channels: |
Mixing channels 10 |
| Equalizer: |
HIGH Shelving: 8 kHz/LOW Shelving: 100 Hz/MID peaking: 2.5 kHz |
| Effects: |
SPX digital reverb (4 program, parameter control) |
| Phantom Power: |
+30V (CH1, 2) |
| Dimensions: |
Mixer 34,8 x 19,7 x 13,5 cm. |
| Weight: |
3.8 kg |
| This kit combines the Electro-Voice EVOLVE 50 Portable 1000W Bluetooth-Enabled Subwoofer with the Evolve 50 Column Speaker to create a lightweight, active PA setup designed to provide high-powered, wide-range frequency reproduction for sound engineers, presenters, and DJs in clubs, parties, concert venues, and live stage events. The kit includes the powered subwoofer, magnetic speaker pole, column array speaker, power cord, and carry bag for the speaker pole and column array.
Electro-Voice EVOLVE 50 Portable 1000W Bluetooth-Enabled Subwoofer (Black)
The black Electro-Voice EVOLVE 50 Portable 1000W Bluetooth-Enabled Subwoofer is part of the EVOLVE 50 portable PA system, which consists of a powered subwoofer, magnetic speaker pole, and a column array full-range speaker. The powered subwoofer utilizes a 12" driver and is powered by the integrated 1000W (500W to subwoofer) amplifier, which combines with the column array to provide a frequency response of 43 Hz to 20 kHz with a maximum SPL output of 127 dB.
System setup is simple and fast. Slide the magnetically locking mounting pole into the appropriate hole on top of the subwoofer, then place the column speaker array on the pole. You don\'t have to run cables between the sub and speaker array; audio connectivity between them is made via internal cabling in the mounting pole. The EVOLVE 50 subwoofer features mic and line inputs via XLR-1/4" combo jacks, stereo RCA and 3.5mm aux input jacks, and XLR thru and mix outputs. It is Bluetooth-enabled to allow wireless streaming of music from your smartphone or tablet. The on-board DSP functions, including mode presets, 3-band EQ, sub level, and more, can be adjusted via the sub\'s rear-panel LCD display or a Bluetooth-connected mobile device. The Electro-Voice EVOLVE 50 ships with a power cord.
- EV QuickSmart Mobile application: Quickly and wirelessly configure, control, and monitor up to six EVOLVE 50 systems simultaneously, and receive immediate notification during critical performance conditions
- High-quality Bluetooth audio streaming for background music or musical accompaniment
- QuickSmartDSP provides high-quality processing via EV\'s signature single-knob user interface with LCD
- Ideal for portable applications. Lightweight and intuitive assembly via the magnet assisted sub pole make a quality performance easier than ever
Electro-Voice EVOLVE 50 Portable PA Column Array (Black)
The black Electro-Voice EVOLVE 50 Portable PA Column Array is part of the EVOLVE 50 portable PA system, which consists of a powered subwoofer, magnetic speaker pole, and the column array. The column array utilizes eight 3.5" neodymium drivers with a custom-designed waveguide, which provides consistent (120°) horizontal coverage. The column speaker array is powered by the subwoofer\'s integrated 1000W amplifier, which delivers 500W to the column array.
System setup is simple and fast. Slide the magnetically locking mounting pole into the appropriate hole on top of the subwoofer, then place the column speaker array on the pole. You don\'t have to run cables between the sub and speaker array; audio connectivity between them is made via internal cabling in the mounting pole. The column array ships with the sub pole and a carrying case.
- Ultra-wide 120° horizontal coverage via custom-designed waveguides and array-formed 40° asymmetrical vertical coverage means all acoustical energy is directed towards both sitting and standing audiences
- Ideal for portable applications. Lightweight and intuitive assembly via the magnet assisted sub pole make a quality performance easier than ever
| Frequency Response |
Column array and subwoofer
Frequency Response (-3 dB): 43 Hz to 20 kHz |
| Frequency Range |
Column array and subwoofer
Frequency Range (-10 dB): 37 Hz to 20 kHz |
| Maximum SPL |
Column Array and Subwoofer: 127 dB |
| Amplifier |
Powered Subwoofer: 1000 W total output
LF Channel Rating: 500 W |
| Crossover |
200 Hz |
| Connectors |
2 x XLR/TRS combo jack input
1 x 1/8" / 3.5 mm input
1 x Stereo RCA input
1 x Wireless Bluetooth audio input
1 x XLR Thru output
1 x XLR Mix Out output |
| Enclosure |
Sub: 0.6" / 15.0 mm plywood |
| Grille |
Steel with black powder coat |
| Color |
Black |
| Power |
Power Supply: 100 - 240 VAC, 50/60 Hz, 1.5 A
Current Rating @ 1/8 Power: 0.6 A |
| Dimensions (H x W x D) |
20.9 x 13.6 x 18.5" / 53.1 x 34.5 x 47.0 cm |
| Weight |
44.7 lb / 20.3 kg |
| Portable Array System AV Set including Speaker Cables
IF Design Award 2016 certificate
- The first truly portable array system
- Fully scalable for far and near field applications
- WaveAhead® technology for high definition audio
- SmartLink® plug & play adapter for universal mounting options
- Built-in 4 channel mixer with DFX and Bluetooth® technology
- Durable lightweight aluminium unibody array elements
- For mobile and fixed applications
The patented CURV 500® AV Set is the perfect fit anywhere music is played: in bars, clubs, studios and even at home as a home entertainment system. Featuring a power of 380 watts RMS and a maximum sound pressure level of 122 dB, the CURV 500® AV Set can remain discreetly in the background, but also provide an impressive rocking performance. The 10" bass-reflex subwoofer with Class D power amplifier represents the core of the CURV 500® AV Set and includes a limiter, protection against short circuit, overheating, over-voltage, as well as a 4-channel mixer with 16 digital effect presets and Bluetooth®. Combo and Speakon-compatible sockets offer extensive connectivity options. Furthermore, the subwoofer features four digital system presets, an M20 threaded flange and three ergonomic carrying handles. The two satellites are operated via SmartLink® adapters. The elements, only 12 x 12 cm in size, are equipped with LD System's own WaveAhead® technology; one 4" and three 1" drivers provide a coherent and extremely detailed playback with high pressure and dynamics. With optional wall and ceiling mounting systems, the satellites can be installed anywhere, where good sound and subtle appearance are required. For even more power, a total of eight array satellites can be operated in stereo mode (max. four on each side). The CURV 500® AV Set includes a subwoofer with a mixer unit, two satellites, two SmartLink® adapters, and two speaker cables.
Product type
PA Complete Systems
System output (RMS):
380 W
Number of array satellites
2
Number of Smartlink adapters
2
Max. SPL (continuous)
116 dB
Frequency response
47 - 20000 Hz
Dispersion (H x V)
110° horizontal, vertical (each satellite) 10 °
RMS
Subwoofer: 300 W , Array Satellites: 2 x 160 W
Peak power
Subwoofer: 1200 W , Array Satellites: 2 x 640 W
Protection circuits
DSP-based multiband limiter , overload , short circuit , thermal overload
Accessories (included)
2 x Speaker cable with terminal block CURV 500 CABLE 2 (3 m) , Power cord
Low/mid driver dimensions
10 "
Low/mid driver dimensions (mm)
254 mm
Cabinet construction
vented
Cabinet surface
PA painting
Dimensions Subwoofer (W x H x D)
325 x 383 x 491 mm
Subwoofer features
16 DFX Presets , 3 ergonomic handels , 4 channel mixer , 4 System DSP Presets , Bluetooth , Threaded flange M20
Mid/Hi system
MF: 1 x 4" / HF: 3 x 1" with WaveAhead® Technology / 16 ohms
Array Satellite Features
internal crossover , metal grille , WaveAhead® Technology
Array Satellite Material
die-cast aluminium
Array Satellite Surface:
powder coated
Array Satellite Dimensions (W x H x D)
122 x 122 x 122 mm
Array Satellite Weight
1.7 kg
Smartlink Adapter Features
2 x 16 mm pole mount socket , 2x M6 thread for optional wall mount
Smartlink Adapter Connectors
1 x Speakon-compatible , 1x Phoenix
Smartlink Adapter Material
die-cast aluminium
Smartlink Adapter Surface
powder coated
Smartlink Adapter Dimensions (W x H x D)
122 x 57 x 122 mm
Smartlink Adapter Weight
0.6 kg
|
EUROPORT HPA40
40-Watt Handheld PA System with Microphone, Wireless Microphone Option and Rechargeable Battery
- Ultra-compact, portable PA system ideal for business meetings, tour guides, classroom activities, and various other applications
- 5" full-range loudspeaker with enormous power and incredible sonic performance in a super-light package
- AC & battery operated with up to 8 hours continuous use per battery charge
- “Wireless ready" for high-quality BEHRINGER digital wireless microphone system (not included)
- Mic and Auxiliary inputs to connect to your mic, smart phone and other line level sources
- Comes with a BEHRINGER XM1800S microphone, 3\' cable, charger and mic stand adapter
- Power switch, Volume control and battery charge indicator LEDs
- Convenient battery and shoulder strap compartment
- Ergonomically designed carrying handle and shoulder strap for effortless portability
- Designed and engineered in Germany
|
Ultra-Compact 500-Watt 6-Channel Portable PA System with Bluetooth Wireless Technology, Wireless Microphone Option, KLARK TEKNIK Multi-FX Processor and FBQ Feedback Detection. Extremely powerful 8'' woofers and 1.35'' aluminum-diaphragm compression drivers. Connect your iPod, iPhone, iPad or any other MP3 player via Bluetooth. "Wireless ready" for high-quality BEHRINGER digital wireless microphone system (not included).
| Brand | BEHRINGER |
|---|
| Model | PPA500BT | | Part Number | 000-B0N | | Input Mic | 2 | | Effect | Yes | | Channels | 4 | | Console Type | Portable PA Systems | | Console Layout | Horizontal | | Power (4 ohms) per channel | 160 | | Equalizer | Yes | | Application | Portable PA | | Series | PPA series | | Warranty | 1 Year |
|
Reviews
There are no reviews yet.