| Content |
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 127 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 12" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
120 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst)
127 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB)
68 - 18000 HZ
Frequency response (-10 dB)
55 - 20000 Hz
Crossover frequency
1400 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
12 "
Woofer dimensions (mm)
304.8 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
| The MCX 10 is a compact high-performance coaxial stage monitor. Depending on the application, the design enables three set-up options: 35° angle for moni-toring from short distances, 55° for longer distances, and 90° e.g. for front-fill applications at the stage edge. Due to its inconspicuous design, the MCX 10 fits harmoniously and eleganty into all surroundings. The speaker features a broad dispersion of 70°. The highly sturdy monitor convinces with its precise sound reproduction and gives musicians on stage a top-class sound experience. The flange inside the handle provides the possibility to use the MCX 10 as a PA system on a high stand. If required, the MCX 10 combines perfectly with the QLB 215 or QLB 118 X/G subwoofers. The monitor offers three Neutrik NL4 speakon connectors. Two of them are placed on the side of the high stand flange.
enclosure design for different positions (speaker stand, monitor, front fill)
- wooden enclosure with weatherresistant polurethane coating
- impregnated speaker membrane for permanent protection against moisture
- coaxialer enclosure design for homogeneous dispersion
- extremely low acoustic feedback behavior
- natural, transparent sound
- pole mount integrated in side handle
- left- and back facing connector panel
- compact dimensions und low weight
- flyable (truss mounting) with optional flying frame
| Components |
10“ + 1,3“ (2,5“ voice coil), coaxial |
| Dispersion (h x v) |
70° conical |
| Nominal load (AES / program) |
300 / 600 W |
| Impedance |
8 ohms |
| SPL nom. (Fullspace@1W/1m) / max. SPL (at AES nominal load) |
95 / 120 dB |
| Frequency range (-6 dB) |
70 Hz – 19 kHz |
| Dimensions (W x H x D) |
405 x 325 x 400 mm |
| Weight |
15 kg |
| Connectors |
3x Speakon NL4 (2x right, 1x left) |
| Finishing |
PU coating (black) |
| Mounting threads |
2x mounting thread M10, 1x M8 safety thread |
| Special features |
2x butterfly handle four sided, pole mount |
| Protective grille |
sturdy front grille with acoustic foam |
| Design |
low profile stage monitor with 3 possible positions (35°, 55°, 90°) |
| Protection class |
IP 44 |
|
- 1000w RMS, 2000w peak, power delivers clarity, punch and more than enough headroom for any
- performance or practice space
- Specially-voiced 12-inch woofer and high frequency compression driver deliver your drum sounds
- with precise, full response across the entire frequency range without any artificial colouration
- (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator
- XLR output to link another Strike Amp 12 or send your performance to another input device
- Lightweight and flexible tilt-back cabinet design that can also be pole-mounted
- Contour EQ switch to control your sound
- Ground-Lift switch eliminates unwanted noise
Specifications:
- Output: Power 2000W (peak, 1300LF + 700HF), 1000W (continuous RMS, 650LF + 350HF)
- Low-Frequency: 12.0” (305mm) low-frequency driver, 3.0” (76mm) high-temperature voice coil
- High-Frequency: 1.4” (35mm) voice coil, neodymium-magnet high-frequency driver with precision waveguide
- Crossover Frequency: 2.0KHz
- Maximum SPL: 131dB (peak), 128dB (continuous) (dB-SPL @ 1m)
- Frequency Response: 53Hz – 20kHz (+3dB)
- Frequency Range: 46Hz – 22kHz (-10dB)
- Horn Coverage 90o horizontal x 60o vertical (nominal)
- Equalisation: Contour switch with low- and high-frequency +3dB boost
Connectors:
- (2) XLR/TRS 1/4” (6.35mm) combo inputs
- (1) XLR link output
- (1) IEC power cable input
- Controls Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
- Indicators: (2) power LEDs (1 front-panel, 1 rear-panel), clip limiter LED
- Protection: Electronic clip, thermal & transducer overdrive
- Input Voltage: 100V~, 110–120V~, 220–240V~; 50/60Hz (switchable)
- Fuse: 100–120V T10AL AC250V 220–240V T5AL AC250V
- Consumption: 800W
- Enclosure: Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille
Dimensions: (width x depth x height) 605 x 354 x 350mm
Weight: 16.3kg |
The LDMON101A features a high end 10" co-axial speaker with a 1" compression driver and delivers 150 W RMS output power.
The Volex power supply system allows a secure connection of further active monitors, this feature enables the installation of a big active stage monitor system while using only one power plug. The monitor also features a softclip-limiter as well as a volume control.
The Housing was built out of a high quality plywood with a high resistance textured finish. The stabile front guard ideally protects the speakerbox.
Specifications LDMON101A: - Model Name: LDMON101A
- Type: Bass Reflex
- Components:
- Woofer / Compression Driver: 10" / 1" Coaxial Custom Made Speaker
- Amplification: Class A / B
- Dispersion: 75° x 75°
- Power: 150 W RMS
- Frequency Range: 90 Hz- 20 Khz
- SPL (1 W / 1 m): 99 dB
- Max. SPL: 121 dB
- Protection: Limiter, Circuit and Overcurrent
- Controls: Volume, On/Off Switch
- Indicators: Signal, Power, Limit
- Connectors:
- Input: Line: XLR /6,3 mm jack (combo)
- Output: Line: XLR
- Power Supply: Transformer
- Cabinet Material: 15 mm Plywood
- Cabinet Surface: Painting
- Dimensions: 360 x 370 x 425 mm
- Features: Ergonomic milled handles, VOLEX power plug input / output
| Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.
The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.
The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability.
Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.
APPLICATIONS
- • Main vocal stage monitor
- • High-output drum or keyboard monitor
- • Sidefill monitor for small- to medium-scale applications
- • Rental companies
- • Professional musicians
General Specs
1200 Watt Peak, 600 Watt RMS
131 dB max SPL
45 Hz - 20 kHz frequency response
15" Woofer, 2.5" voice coil
1" Driver, 1.4" voice coil
Acoustical Specs
Frequency Response -3 dB: 45 Hz ÷ 20 Hz
Max SPL: 131 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1“, 1.4" voice coil
Woofer: 15“, 2.5" voice coil
Inputs/Outputs
Input signal: bal/unbal
Input connectors: Jack-XLR male
Output connectors: XLR female
Processor Section
Crossover frequencies: 1400 Hz
Protections: RMS limiter, HF
Limiter: Fast limiter
Amplifier Specifications
Total power: 1200 W PEAK
High frequencies: 400 W PEAK
Low frequencies: 800 W PEAK
Total power: 600 W RMS
High frequencies: 200 W RMS
Low frequencies: 400 W RMS
Cabinet Specs
Cabinet Material: Baltic birch
Handles: 1 side
Pole Mount/Cap: Yes
Colour: Black
Size/Weight
Height: 362/14.25 mm/inch
Width: 673/26.49 mm/inch
Depth: 473/18.62 mm/inch
Net Weight: 20.7/45.63 kg/lbs |
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Reviews
There are no reviews yet.