| Content | Adam Hall Stands RF1
Microphone Filter
Info sheet
The RF1 is designed to help minimizing the undesirable hall reflections, noises and echos in order to obtain a very „dry" vocal or instrumental recording signal. This filter allows good recording results even under unfavorable ambient conditions without having to take complicated measures to reproduce studio conditions or an acoustical insulation. It features a lightweight and rugged construction with high quality soundproofing materials and can be mounted on all conventional microphone stands.
The microphone holder of the RF1 is adjustable for both depth and height and thus permits excellent acoustic isolation of all types of microphones, even with large-diaphragm microphones.
- Easily portable
- Mountable on conventional microphone stands
- 3/8\" and 5/8\" thread adapter for stands and microphone holders
- Low weight
- Height adjustable in relation to the microphone
Product type
Microphone Accessories
Type
Microphone filter
Threaded connector
5/8 \"
Material
foam
Width
504 mm
Height
306 mm
Depth
270 mm
Accessories (included)
Adapter 5/8\" to 3/8\"
Other features
height-adjustable
Weight
3 kg |
- Portable absorber/diffusor for studio and live applications
- Reduces unwanted room reflections, echoes and ambient noise during vocal and instrument recordings to a minimum
- Extendable table tripod
- 3 folding segments
- Sturdy steel frame with high-density acoustic foam
| Attachment system: |
5/8 inch thread |
| Type (general stands): |
Microphone stand (desk) |
| Dimensions: |
Width: 21 cm
Depth: 20 cm
Height: 38 cm |
| Weight: |
800 g |
| Special educational edition only for students and teachersFor the purchase of educational products you need to provide proof of eligibility.
In less than 20 minutes you can calibrate your existing studio speakers with a SoundID Reference measurement microphone and calibrate your existing headphones with more than 280 headphone calibration profiles already included in the software as ready-to-use presets.
With an applied calibration profile the software sets thefrequency response target to be completely flat across all audible frequencies so youcan make music that sounds great everywhere.
You can also now make custom adjustments to the target curve in real time with the new custom target feature.
With accurate studio reference sound you can seamlessly switch between speakers,headphones, and rooms.
Finally, ensure continuity of your workflow regardless of distance, your gear or set-up.
Key Features
Speaker calibration: save as many profiles as needed
Headphone calibration profiles for 280+ supported models
Custom target: target curve adjustments in real time
Translation Check: simulating 20+ different devices and device types for
accurate mix translation results everywhere without leaving the workstation
3 filter modes: Zero Latency, Mixed and Linear Phase
Additional DSP processing controls: Mono, Dry/Wet and Safe Headroom
MIDI mapping in the SoundID Reference app for various controls
User Presets in the SoundID Reference app for switching quickly between
predefined output device/channel pair combinations
What's Included
SoundID Reference app for Speakers & Headphones
SoundID Reference DAW plugin (AU, VST, AAX)
SoundID Reference Measurement Microphone with an XLR connection and
individual calibration profile
Averaged profiles for 280+ supported headphone models
Activation key for the product license: the product can be activated and used
on 3 machines
System Requirements
Mac: macOS 10.12 or later
PC: Windows 8 (64-bit) or later
Sonarworks supported or Sonarworks individually calibrated headphones
2.0 or 2.1 stereo speaker system
An audio interface featuring +48V Phantom Power and 44.1 kHz sample rate
capability
During the speaker measurement process, the audio hardware setup must
consist only of a single external hardware device
XLR to XLR audio cable
Microphone Specification
Houses a pre-polarized electret-condenser capsule
Frequency response: 20 Hz - 20 kHz with a supplied calibration profile
Omnidirectional polar pattern
Sensitivity is rated at -37 dB/Pa (14 mV)
Self noise: 24 dB
S/N ratio: 70 dB
Dynamic range: 106 dB
Maximum SPL: 132 dB | Show starts in an hour, people are waiting, you are setting the stage and you feel the pressure because you just can't find that right clamp. The search is over!
With the MS U CLMP you have a clamp that fits any microphone.
It's clamping range of 14-42 mm will hold any microphone in your collection, both round or conical. It will also make sure not to scratch your microphones due to the EVA padded grip.
With a Gravity MS U CLMP, you have an all-purpose solution for attaching any hand-held microphone.
Product type
Microphone Accessories
Microphone mount (diameter)
14 - 42 mm
Features
3/8" Adapter for Microphone Stands
Black ring pack included
Yes
|
- For all standard microphone stands, double nylon screen with sturdy black plastic frame.
- Gooseneck length: 270 mm
- Screen: Ø 130 mm
|
ARTSOUND SP-340 Nylon pop filter
- High quality acoustic filter
- Preventspops when recording vocals
- Adjustable clamp fixes securely to any mic stand
- Gosse neck for precise positioning
This pop filter is a necessary and effective accessory for professional recordings. It can minimize unwanted S sounds and pop sounds that are mostly generated by the voice with the articulation of the ´P´, ´B´, ´T´ and ´K´. This nylon pop filter is a little less effective than the metal version but it also is a bit more gentler on the sound. Check both variations for your desired result.
Pop diameter : 150mm
Goose neck length: 345mm
Weight :198g |
Reviews
There are no reviews yet.