Price | €347.00 €256.50 incl. GR VAT | €113.00 €99.00 incl. GR VAT | €2,015.25 €1,833.88 incl. GR VAT | €1,124.00 €989.00 incl. GR VAT | €322.42 €290.00 incl. GR VAT | €2,443.00 €2,150.00 incl. GR VAT |
Content | Directional antenna for setting up larger systems.
- Frequency range: 500 ~ 900 MHz
- Cable and stand not included
This product is compatible with the LDWS100, LDWS1000, LDWIN42 and LDU500 series.
Product type
Wireless Microphone System Accessories
Type
Directional Antennas
Frequency band
500 - 900 MHz
Frequency bandwidth
400 MHz
Impedance
50 Ohm(s)
Antenna gain
7 dBi
Antenna connector
TNC
Threaded connector
5/8 "
Width
290 mm
Height
260 mm
Depth
3 mm
Weight
0,953 kg
Accessories (included)
Adapter 5/8" to 3/8“ |
The Sennheiser NT1-UK power adaptor supplies 12v D.C. regulated power for the Sennheiser ASP 2 passive antenna splitter.
The ASP 2 also powers up to 4 x EM100 / 300 / 500 G2 radio mic receivers and 2 x AB 2 active mast head amplifiers 240 volt A.C. input. (UK 3 pin). The ASP 2 with NT1-UK combination helps reduce Antenna and PSU requirements in a multi receiver system.
Sennheiser NT1-UK Features:
- 12 volt D.C. regulated output, centre pin polarised positive
- 1.5 amp current rating
The Sennheiser NT1-UK power adaptor supplies 12v D.C. regulated power for Sennheiser ASP 2 passive antenna splitter.
|
Antenna Booster with 10dB Gain, for use with GZA1036 Antenna-36 MHz Wide |
General Description
Antenna, 490-960MHz, passive, circular polarization
Features
-
High gain
-
Minimized multipath
-
Broadband
Delivery Includes
-
A 5000-CP
-
Adapter BNC to N
-
User manual
|
The IR-300M is a hands-free infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.
Battery | IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces). | Current Consumption | Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H) |
Infrared Emitter
Wavelength | 870 nm (AM: Brightness modulation) | Modulation Method | Frequency modulation | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | Transmission Distance | Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space) | Tone Signal | 32.768 kHz | Modulation Sensitivity | ±4.8 kHz (1 kHz, when SPL of 84 dB is input) | Maximum Input Sound Pressure | 120 dB SPL | Input Sensitivity Adjustment | Adjustment range: -9 dB to 0 dB (factory preset: 0 dB) | Microphone Unit | Unidirectional electret condenser microphone | Frequency Response | 100 Hz - 12 kHz | Preemphasis | 300 μs | Input | External microphone input (φ3.5 monaural mini jack) | Battery Operation Time | Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N) | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter | Dimensions | 64 (W) × 91.3 (H) ×27.3 (D) mm (2.52" × 3.59" × 1.07“) | Weight | 130 g (0.29 lb) (with battery and strap) | Accessory | Screw driver (for setting) …1, Color label (6 colors) …1 |
|
Technical Data
RF frequency range 470 ..... 870 MHz
Transmission loss 0 dB
Nominal impedance 50 Ohm
RF input BNC
Remarks Booster Feed: 12 V, 70 mA
Mains voltage 100 - 240 V
Mains frequency 50 - 60 Hz
Dimensions 19 ʼʼ, 1U
Weight approx. 3 kg |
Reviews
There are no reviews yet.